6G Celicas Forums

Welcome Guest ( Log In | Register )

 
Reply to this topicStart new topic
> what clutch kit and flywheel i must put on my st205, exedy or act
post Oct 20, 2011 - 3:15 AM
+Quote Post
GT4

Enthusiast
*
Joined Sep 2, '11
From cyprus
Currently Offline

Reputation: 0 (0%)




hello i have st205 6GC and i need to replace clutch and i need option of clutch and Light flywheels to instal it up..
post Oct 20, 2011 - 4:41 AM
+Quote Post
Rav4Race

Enthusiast
*
Joined Jul 14, '08
From Mauritius
Currently Offline

Reputation: 0 (0%)




In my opinion;

Exedy is very good BUT...sometimes you r 'forced' to buy a new flywheel each time ur clutch disc is worn as they (disc and flywheel) r sold together as a complete set. Thus, even your flywheel is still fine, u may have to pay for a new one when buying another complete set. Unless you are buying only the 3 puck ceramtallic clutch or single kevlar disc then u won't get it with the flywheel. +Expensive!
If u buy Exedy make sure you get the bearing and fork which sometimes they forget to give u. I personally like the Exedy Hyper Single (but its sold with the flywheel).

ACT is good but heard some bad things in some cases. E.g: too hard on the pedal, disc damaged in some cases etc.. But for the price u buy it + u don't always need to buy a new flywheel then its worthy. Heard that it holds power very well too.

Personally I am currently using RDP Racing 5 puck. I was amazed by its durability + it holds power very well. But its not very popular. I bought it Thailand.

The clutch that i would like to buy next is the ORC Ogura...Heard its among the best but, its very expensive!

I would avoid using F1 racing...as some people I know who used it said it was a lady driven clutch set. Very soft pedal...even a bit too soft. They changed it soon after for another brand.
post Oct 20, 2011 - 4:46 AM
+Quote Post
malpaso



Enthusiast
*****
Joined Feb 3, '06
From Czech Republic (Europe)
Currently Offline

Reputation: 56 (100%)




there are tons of options... I have been using clutch-masters nad have no issues.


--------------------
No more replicas... This is evolution... This is SS-four :)

________[Featured Celica of 6gc.net @ 2010]_________
post Oct 20, 2011 - 8:04 AM
+Quote Post
Sunny



Enthusiast
**
Joined Nov 15, '10
From Austria
Currently Offline

Reputation: 1 (100%)




Hi,

what Malpaso said, i bought a ATS clutch a few weeks ago for my engine build, but unfortunetly
i doesn't drive the clutch yet a the engine is a lont time build up

a friend told me his carbonetic is very well to drive, and crbonetic buy the clutch from ATS but only the
spec1 type, spec2 i just at ATS available

here you can find some pics

http://www.6gc.net/forums/index.php?showto...t=0&start=0

greetz

This post has been edited by Sunny: Oct 20, 2011 - 8:06 AM


--------------------
KEEP COOL UNDER PRESSURE
post Oct 20, 2011 - 9:11 AM
+Quote Post
Smaay

Enthusiast
*****
Joined Dec 8, '03
From Lancaster CA
Currently Offline

Reputation: 6 (100%)




southbend clutch FTW! www.dxdracingclutches.com the MR2 uses the same clutch


--------------------
2001 Celica GT-S Turbo
1997 Supra TT 6speed
1997 Celica 3MZ/1MZ swap
1990 Celica All-Trac
post Oct 20, 2011 - 10:42 AM
+Quote Post
95CelicaST



Enthusiast
*****
Joined Feb 5, '05
From pineapple under the sea
Currently Offline

Reputation: 9 (100%)




Southbend Clutch + Fidanza flywheel. Love it.


--------------------
1991 MR2 - T-tops - Crimson Red - Gen3 3SGTE - Lots of money

I'm not really an asshole, but I play one on the internet.
**** Photobucket
post Oct 20, 2011 - 11:54 AM
+Quote Post
GT4

Enthusiast
*
Joined Sep 2, '11
From cyprus
Currently Offline

Reputation: 0 (0%)




Just know the told for the Brand HELIX if you know it.And told me its better to put with 6teeths tongue.gif

Reply to this topicStart new topic
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:

 



Lo-Fi Version Time is now: November 23rd, 2024 - 9:52 AM