 Knocking noise and Brake line suggestions |
  |
 Mar 12, 2012 - 3:13 PM
|
 
|
 Enthusiast  Joined Sep 1, '10 From Toronto Currently Offline Reputation: 3 (100%)  |
So I was wondering if anyone had any suggestions on brake lines. I know there are numerous sets on ebay, but I'm not sure if they can be trusted. I am looking for a nice stainless steel set to replace my current stock ones on my st204 GTS.
Also another question... I had my rear passenger side caliper replaced this past fall... and for some reason I have always had issues on that side. Whenever I brake and then start to drive I hear this knocking sound as if my brakes are seizing and grabbing to the rotor, but its never consistent. It will do it a few times in a row while in a slow speed but once I have sped up it stops and only occurs again when braking. Do you guys think this may be due to the brake lines? or just sh*ty installation of the caliper at the shop? or is it something completely different... I know it may be difficult to tell but I can always try to get a video up to help decipher the problem. Let me know what you think and any suggestions about the brake lines. 
|
|
Mar 14, 2012 - 11:25 AM
|
|
|
Enthusiast Joined Sep 1, '10 From Toronto Currently Offline Reputation: 3 (100%) |
no suggestions?
|
|
Mar 14, 2012 - 12:05 PM
|
|
|
Enthusiast Joined Jul 29, '11 From chino, Ca Currently Offline Reputation: 4 (100%) |
well i believe that noise is to neglected slider pins you've got to grease those bad boys i had that same problem but it was because my genius friend told me to use anti seize. and also i can get some custom brake lines made for you ive got a shop out here in ontario that can make any color length and fittings you want let me know if you are interested and and questions so i can ask them they are usually about 20 bucks a line depending on length i got 14" lines blue with brass fittings for 17 bucks each for my buddies 7th gen.
|
|
Mar 15, 2012 - 4:31 PM
|
|
|
Enthusiast Joined Sep 1, '10 From Toronto Currently Offline Reputation: 3 (100%) |
thanks, ill lube'em up when i get a chance and see if that helps. I'll let you know about the brake lines. are they stainless steel by chance?
|
|
Mar 15, 2012 - 7:36 PM
|
|
|
Enthusiast Joined Jul 29, '11 From chino, Ca Currently Offline Reputation: 4 (100%) |
yes sir the lines are stainless steel braided.
|
|
Mar 16, 2012 - 2:23 PM
|
|
|
Enthusiast Joined Sep 1, '10 From Toronto Currently Offline Reputation: 3 (100%) |
Beautiful, ill let you know!
|
|
Mar 16, 2012 - 5:18 PM
|
|
|
Enthusiast Joined Jul 29, '11 From chino, Ca Currently Offline Reputation: 4 (100%) |
did you solve the problem yet?
|
|
Mar 17, 2012 - 3:03 PM
|
|
|
Enthusiast Joined Sep 1, '10 From Toronto Currently Offline Reputation: 3 (100%) |
Yeah, all fixed. You we're right, I had to grease the slider pins. Theres still a little bit of noise back there but I think its due to my rotors and pads. my pads aren't the greatest and they sound like they are grinding every time I break. Going to switch them out soon. But thanks for the advice about the pins... would have taken me a while to figure it out haha.
|
|
Mar 17, 2012 - 10:56 PM
|
|
|
Enthusiast Joined Jul 29, '11 From chino, Ca Currently Offline Reputation: 4 (100%) |
QUOTE (v1becelica @ Mar 17, 2012 - 3:03 PM)  Yeah, all fixed. You we're right, I had to grease the slider pins. Theres still a little bit of noise back there but I think its due to my rotors and pads. my pads aren't the greatest and they sound like they are grinding every time I break. Going to switch them out soon. But thanks for the advice about the pins... would have taken me a while to figure it out haha. No problem man i found a tsb on that and it was described as you descriped it haha anytime i can help i do my best goodluck man |
|
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
| Lo-Fi Version | Time is now: April 22nd, 2025 - 6:44 PM |