Delta cam's, Regrinds........ Options

[Takumi-FujiWaraS...]

Has anyone ever ran delta's on the 7AFE? If so i would like to hear your input. Coming from hondas for the past few years i've ran deltas in a few project's and have had decent luck with them vs the cost of the grind.

I was thinking of just running some very mild 260's (If delta even does grinds for the 7a which i'm sure they can and will) and bolt on's on my celica just to make it a bit more fun nothing more/less... the car lacks mid and top pretty bad as i'm sure yall know.
Also is their any other options besides regrinds out there?

Just to add no i do not want to do a swap i've done did that to this car when it was my little brothers i'm not looking for a race car just a bit more pep.

Any helpful advice is aprreciated, thanks in advance.

[SwissFerdi]

So did you drop these into Hondas without modification, no other tuning? Not sure if that would work on the 7A, but I'll be glad to watch you try. Any power gain with the 7A is worth looking at, I personally like the engine.

This post has been edited by SwissFerdi: May 30, 2012 - 8:32 AM

[Takumi-FujiWaraS...]

No with my past F and D series i ran far more aggressive cam's such as the 272's or bisi lvl2 both require a tune and valve springs atleast. The 260 "Should" run on a stock tune with no problems and valve train, but that's just a pissing in the wind statement because i don't know if they have a grind (Main reason for the thread was to see if anyone else has tried) yet so i don't know the specs.

The 260 should be very mild, i guess i'll call and see here soon enough. No rush still parting out my cb project, but others opinions on anything said cam wise for the 7a is appreciated.

This post has been edited by Takumi-FujiWaraST: May 30, 2012 - 10:57 AM

[celica74]

any updates? i too am looking into regrind as you already know. also has in mind some 1zzfe intake valves(1mm bigger and can purchase with performance cuts on them), not sure on the exhaust, seems like cutting 8-10mm off a 4age 16v would be too much. springs i was thinking 1zz as well. probly the crowers.