 Problem with my AMP Help!, Amp wire getting hot. |
  |
 Jan 15, 2004 - 1:45 AM
|
 
|
|
Enthusiast Joined Jan 14, '04 From Kentucky Currently Offline Reputation: 0 (0%)  |
Ok peeps here's the deal. I just got a 94 Celica installed my 2 12" Pioneer speakers from my old car. Bought a wiring kit for this installation and everything. I connected the 12 volt power cable coming into my 500 w amp to the correct spot on my amp. Got everything working and then headed to town as I'm driving to town I smell the burning of electronics yet nothing is messing up still working fine. So I pull over and check the amp. The gold plated connection where the 12 volt was connected was rusted looking and the plastic around it some what melted. The wire itself had melted the plastic sheath right around the connector as well. Now the 12 volt wire is fused as well as the amp itself. But none of the fuses blew or anything when it did all of this. I have disconnected it for now and was wondering if anybody knew what might have caused this and if so how to fix it. Thanks!
  Snyper |
|
Jan 15, 2004 - 2:14 AM
|
|
 Enthusiast  Joined Oct 3, '02 From Va Team 6gc Currently Offline Reputation: 1 (100%) |
wut type of install kit did u use and wut gauge wire for your 12 volt?
--------------------  All I have in this world is my Balls and my Word and I'm not breaking em for no one,- Tony Montana Team 6gc 2005 |
|
Jan 15, 2004 - 8:55 AM
|
|
 Enthusiast Joined Feb 10, '03 From Connecticut Currently Offline Reputation: 11 (100%) |
Yeah sounds like your gauge is too thin, may need thicker wire.
-------------------- |
|
Jan 16, 2004 - 4:56 PM
|
|
||
 Enthusiast Joined Dec 30, '03 From Atlanta Currently Offline Reputation: 0 (0%) |
thicker wire would be a good thing. if its a true 500 watt amp you would need at least 8ga wire. i have 4ga running to my system that is only like 600 true watts. |
||
|
Jan 17, 2004 - 7:55 AM
|
|
 Enthusiast Joined Nov 15, '03 From mississippi Currently Offline Reputation: 0 (0%) |
Never use anything smaller than 8 ga wire. Man, you can catch your car on fire be careful. Also what amp fuse do you have at the battery.
CelimanST |
|
Jan 17, 2004 - 9:36 AM
|
|
 Enthusiast Joined Sep 12, '03 From Portland , Oregon , United States Currently Offline Reputation: -1 (33%) |
8g Wire or better for any amp. I prefer 4g little harder to route tho.
the 8g about 50c a Foot, and the 4g about 1-1.50$ a foot. I always run a 60amp Fuse. good luck. DTE -------------------- I am a thief.
do not buy anything from me. |
|
Jan 17, 2004 - 10:58 AM
|
|
||
|
Enthusiast Joined Dec 30, '03 From Atlanta Currently Offline Reputation: 0 (0%) |
You should only run the same fuse size as you amps combined. like my amps fuses are 60 and 30 so i run a 90 amp fuse. if you only had a 30 amp fuse in your amp then you should run a 30 amp fuse in you wire. |
||
|
Jan 18, 2004 - 8:34 AM
|
|
|
Enthusiast Joined Nov 15, '03 From mississippi Currently Offline Reputation: 0 (0%) |
What ever the fuse size is at your battery make sure that the ampage is about 5 amps less this will make sure you want have to worry about any damage to your amplifier.
|
|
Jan 27, 2004 - 5:34 PM
|
|
 Enthusiast Joined Feb 16, '03 Currently Offline Reputation: 1 (100%) |
i agree with supersprynt, u need thicker wire.
--------------------  |
|
Jan 28, 2004 - 1:56 PM
|
|
 Enthusiast Joined Oct 13, '02 From Blairstown, New Jersey Currently Offline Reputation: 6 (100%) |
I have a 300 watt amp and i use 8 gauge power and ground....i wouldnt advise using anything less. Along with checking the wire gauge and fuse amp ratings, double check that you have enough wire fed into the receptors on the amp, and make sure its all tight too.
Not trying to threaten your intellegence, its just that a wire can come loose easily if you dont double or triple check your work. -------------------- 3rd gen ST205 3SGTE - Alive and boosting. |
|
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
| Lo-Fi Version | Time is now: November 26th, 2024 - 10:19 AM |