 V6 swap kits |
  |
 Oct 22, 2012 - 4:26 PM
|
 
|
|
Enthusiast  Joined Dec 8, '03 From Lancaster CA Currently Offline Reputation: 6 (100%)  |
ok with the increasing interest in V6 swaps im thinking of providing a kit that will include some of the parts you need.
the kit will include the passenger engine mount.   the Y pipe and down pipe to a flex pipe. the rest of the exhaust is on you.  the Y pipe will have a V band and then the flex pipe will be on the other end. ill try to get pics on my car to show you. and an axle bearing carrier for the S54 transmission. Insert pic here when i pull this engine out to do the full 3MZ swap or if someone in So Cal want to be my guienna pig ill have the carrier bracket made on your car. im thinking the cost for all of these parts will be in the 700 range plus shipping. now before you say thats alot. there is alot of fab time in making the Y pipe and of course the cost of materials. -------------------- 2001 Celica GT-S Turbo
1997 Supra TT 6speed 1997 Celica 3MZ/1MZ swap 1990 Celica All-Trac |
|
Oct 22, 2012 - 4:47 PM
|
|
 Enthusiast Joined Aug 23, '11 From kenton ohio Currently Offline Reputation: 14 (100%) |
How much just for the mounts ?
-------------------- 95 gt coupe, v6 swap weekend toy
99 gt hatch beams swapped wife's 94 st hatch my daily driver http://www.6gc.net/forums/index.php?showtopic=82235  n |
|
Oct 22, 2012 - 4:50 PM
|
|
|
Enthusiast Joined Dec 8, '03 From Lancaster CA Currently Offline Reputation: 6 (100%) |
my fab guy wanted 200 for the mount by itself. its a little pricey but it looks good and does the job
-------------------- 2001 Celica GT-S Turbo
1997 Supra TT 6speed 1997 Celica 3MZ/1MZ swap 1990 Celica All-Trac |
|
Oct 22, 2012 - 4:55 PM
|
|
|
Enthusiast Joined Aug 23, '11 From kenton ohio Currently Offline Reputation: 14 (100%) |
Ok I might be intrested in a mount after the holidays are over
If I don't make a solid mount on my own Yours looks better than anything I could make. An if you don't get to it before me. I'm going to make up a new axle mount this winter. I'll make you a copy to mass produce for you kit if you would like -------------------- 95 gt coupe, v6 swap weekend toy
99 gt hatch beams swapped wife's 94 st hatch my daily driver http://www.6gc.net/forums/index.php?showtopic=82235 n |
|
Oct 22, 2012 - 5:55 PM
|
|
 Moderator Joined Jun 29, '08 From Denver Currently Offline Reputation: 59 (100%) |
$700 seems more than fair for everything included. The motor mount looks great!
-------------------- "Employ your time in improving yourself by other men's writings, so that you shall gain easily what others labored hard for." -Socrates. Even Socrates told us to use the search button!
 2006 Aston Martin V8 Vantage. 1998 Celica GT- BEAMS Swapped. 2022 4Runner TRD Off Road Prenium. 2021 GMC Sierra AT4. |
|
Oct 22, 2012 - 6:19 PM
|
|
 Enthusiast Joined Aug 4, '06 From Chicagoland Currently Offline Reputation: 9 (100%) |
+1!
700 is a great deal. I just might have to pick a kit up.... Are you going to stick with the DBW for the 3MZ? If so, how are you going to mount your new pedal? -------------------- ~bloodMoney
 |
|
Oct 22, 2012 - 7:07 PM
|
|
|
Enthusiast Joined Dec 8, '03 From Lancaster CA Currently Offline Reputation: 6 (100%) |
QUOTE (bloodMoney @ Oct 22, 2012 - 4:19 PM)  +1! 700 is a great deal. I just might have to pick a kit up.... Are you going to stick with the DBW for the 3MZ? If so, how are you going to mount your new pedal? actually no what im going to do is use the intake manifold and dual throttle bodies from the 1MZ VVT and that computer. its still a throttle cable engine. i found one today complete in a 2003 Avalon at my local yard. they want 1500 for the engine, harness, computer, pretty much everything but the trans. thats more than i want to pay since all i really need is the manifold harness and computer. it also has an immobilizer and i dont think i want to fight with that. -------------------- 2001 Celica GT-S Turbo
1997 Supra TT 6speed 1997 Celica 3MZ/1MZ swap 1990 Celica All-Trac |
|
Oct 22, 2012 - 8:07 PM
|
|
|
Enthusiast Joined Aug 4, '06 From Chicagoland Currently Offline Reputation: 9 (100%) |
Yea... I've got a crate 3MZ sitting in my barn right now, but it's DBW...
-------------------- ~bloodMoney
|
|
Oct 22, 2012 - 8:07 PM
|
|
 Enthusiast Joined Jan 4, '12 From US Currently Offline Reputation: 6 (100%) |
That mount looks good, and it probably does the job just fine, but it'd look better with a bigger bushing
-------------------- 1993 Celica GT Coupe - sold
1994 Celica GT Liftback |
|
Oct 23, 2012 - 9:22 AM
|
|
|
Enthusiast Joined Jul 20, '11 From Houston tx Currently Offline Reputation: 2 (100%) |
definitely interested
|
|
Oct 23, 2012 - 11:29 PM
|
|
|
Enthusiast Joined Dec 8, '03 From Lancaster CA Currently Offline Reputation: 6 (100%) |
QUOTE (bloodMoney @ Oct 22, 2012 - 6:07 PM) Yea... I've got a crate 3MZ sitting in my barn right now, but it's DBW... all you have to do is get the VVT 1MZ intake manifold and throttle body, and ECU. the 1MZ ECU will run the 3MZ just fine -------------------- 2001 Celica GT-S Turbo
1997 Supra TT 6speed 1997 Celica 3MZ/1MZ swap 1990 Celica All-Trac |
|
Oct 23, 2012 - 11:44 PM
|
|
|
Enthusiast Joined Aug 23, '11 From kenton ohio Currently Offline Reputation: 14 (100%) |
QUOTE (bloodMoney @ Oct 22, 2012 - 9:07 PM) Yea... I've got a crate 3MZ sitting in my barn right now, but it's DBW... That's not the motor you should be focusing on putting in your car ! -------------------- 95 gt coupe, v6 swap weekend toy
99 gt hatch beams swapped wife's 94 st hatch my daily driver http://www.6gc.net/forums/index.php?showtopic=82235 n |
|
Oct 24, 2012 - 7:26 AM
|
|
|
Enthusiast Joined Aug 4, '06 From Chicagoland Currently Offline Reputation: 9 (100%) |
QUOTE (kurt95gt @ Oct 23, 2012 - 11:44 PM) That's not the motor you should be focusing on putting in your car ! Hey now.... I'm working on it... I can explore other options as well... -------------------- ~bloodMoney
|
|
Sep 27, 2015 - 7:08 PM
|
|
 Enthusiast Joined Jun 21, '14 From Ottawa, Ontario, Canada Currently Offline Reputation: 0 (0%) |
I work at a metal fab shop. If you give me the specs on that mount I could make one up for $100 CAD.
-------------------- |
|
Dec 2, 2016 - 12:20 PM
|
|
|
Enthusiast Joined Feb 4, '16 From Lancaster PA Currently Offline Reputation: 0 (0%) |
How much for just the down pipe?
|
|
2 User(s) are reading this topic (2 Guests and 0 Anonymous Users)
0 Members:
| Lo-Fi Version | Time is now: January 16th, 2025 - 2:57 AM |