 Pink ECU connector pin, what is it used for?, Plug "E7" pin 9 |
  |
 May 1, 2013 - 7:40 AM
|
 
|
|
Enthusiast  Joined Sep 6, '12 From Holland Currently Offline Reputation: 1 (100%)  |
Hello,
I'm busy doing the wiring conversion for the 7AFE -> 4AGE 20V swap. I'm stuck with 1 pin on the connector. If you look at the image below i'm talking about a pink wire (with some silver spots) that is located on pin 9 on connector E7. Anybody knows what this one is used for? I'm thinking about my Toyota TVSS IIIB factory alarm, but can;t tell for sure. All the pinout on the internet don't describe that pin  Sorry the image: http://img.photobucket.com/albums/v132/wan...t4/Pinout_1.jpg This post has been edited by onnaj: May 1, 2013 - 3:55 PM -------------------- |
|
May 1, 2013 - 11:26 AM
|
|
|
Enthusiast Joined Sep 6, '12 From Holland Currently Offline Reputation: 1 (100%) |
Btw: The pink cable seems to be linked to the radio connector (but doesn't do anything) or disappear behind te dash. As far as i can see now it isn't for my alarm or remote control.
-------------------- |
|
May 2, 2013 - 12:27 AM
|
|
 Enthusiast Joined Apr 18, '05 From Lincoln, Ar Currently Offline Reputation: 7 (100%) |
Look at the wiring diagram it should tell you where it goes. I don't have my manual handy atm
|
|
May 2, 2013 - 2:16 AM
|
|
|
Enthusiast Joined Sep 6, '12 From Holland Currently Offline Reputation: 1 (100%) |
I've read all diagrams I could find but no one tells me what that cable is meant for
-------------------- |
|
May 7, 2013 - 2:49 AM
|
|
|
Enthusiast Joined Sep 6, '12 From Holland Currently Offline Reputation: 1 (100%) |
Problem solved!
Its the EGW pin. Or in other words the exhaust gas warning light pin. Have no clue why that is on my ECU while i don't have an exhaust gas temp sensor. -------------------- |
|
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
| Lo-Fi Version | Time is now: November 28th, 2024 - 11:35 PM |