 Rear license plate panel grommets |
  |
 Oct 8, 2013 - 12:29 PM
|
 
|
|
Enthusiast  Joined Dec 29, '08 From midwest Currently Offline Reputation: 0 (0%)  |
Recently finished replacing my rear reinforcement bar, and found that one of the small white plastic pieces that the 2 bolts, (one on each side of the rear license plate panel), is stripped. I can get the bolt to tighten down okay, but will not tighten down real firmly before it strips. I checked online, and ordered a couple of them, (called grommets). Wanted to know if these just snapped in/out, or slide out somehow. Thanks
|
|
Oct 9, 2013 - 12:42 PM
|
|
|
Enthusiast Joined Dec 29, '08 From midwest Currently Offline Reputation: 0 (0%) |
okay, so maybe someone can answer this then. If the bolt tightens down even somewhat before stripping, and leave it at that point, do I even need to worry about replacing the grommet, or leave as is. I have it lined up pretty even, and do not want to have to remove the lights, etc. if I don't have to. Any thoughts please let me know.
|
|
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
| Lo-Fi Version | Time is now: November 29th, 2024 - 6:38 PM |