The C52 Transmission thread, info & troubleshoot Options

[Rusty]

The C52 Transmission:


General info:

Type of Transaxle: C52-0#A Manual
Notes: Open differential (A)
Type of Engine: 7A-FE
Model: AT200
Transaxle type C52 uses constant mesh synchronizers for forward gears and a sliding mesh reverse gear.
The input shaft is composed of the 1st and 2nd speed gears and the reverse drive gear, and the output shaft is composed of the drive gear (for use with ring gear).


Gear Ratio:

1st Gear: 3.166
2nd Gear: 1.904
3rd Gear: 1.310
4th Gear: 0.969
5th Gear: 0.815
Reverse Gear: -3.250
Differential Gear ratio: 4.058



Maintenance

Oil Capacity: 2.6L (2.7 US qts, 2.3 Imp. qts)
Oil Viscosity: SAE 75W - 90
Oil Grade: API GL-4 or GL-5


Troubleshooting
Use the table below to help you find the cause of the problem. The numbers indicate the priority of the likely cause of problem. Check each part in order. If necessary, replace these parts.





Pictures:




The engagement of the transaxle gears.