 Hybrid driveshaft Bolts |
  |
 Mar 7, 2014 - 10:41 PM
|
 
|
|
Enthusiast  Joined Sep 11, '08 From Surrey Unitedkingdom Currently Offline Reputation: 1 (100%)  |
As with the E-series gearbox install with 3SGTE conversion, the hybrid driveshaft (MR2 inner with ST185 outer) can some one tell me the type of longer bolt needed to use with a spacer please guys.
|
|
Mar 8, 2014 - 9:39 AM
|
|
 Enthusiast Joined Mar 8, '04 From Newport, RI Currently Offline Reputation: 63 (99%) |
I went to a local fastener shop (they sell all kinds of bolts). I brought one of the stock hex bolts and they matched them up - pitch and diameter - and I bought some that were 10mm longer. They cost about $2 each IIRC.
Here's more info on the spacer, not much on the bolts. http://www.6gc.net/forums/index.php?showtopic=32626 -------------------- |
|
Mar 8, 2014 - 6:13 PM
|
|
|
Enthusiast Joined Sep 11, '08 From Surrey Unitedkingdom Currently Offline Reputation: 1 (100%) |
Thanks Batman
|
|
Mar 8, 2014 - 8:23 PM
|
|
|
Enthusiast Joined Sep 11, '08 From Surrey Unitedkingdom Currently Offline Reputation: 1 (100%) |
Bolts are Socket Cap 12.9 High Tensile M10x1.5x90mm
|
|
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
| Lo-Fi Version | Time is now: November 29th, 2024 - 5:34 AM |