pig rich, looking for ideas |
pig rich, looking for ideas |
Feb 24, 2016 - 1:28 PM |
|
Enthusiast Joined Jun 21, '11 From Oregon Currently Offline Reputation: 0 (0%) |
So I just bought someone elses problems. Its a 95 GT with 183K on the clock. Previous owner had an issue with the car running poorly. Will start but barely run. He threw some parts at it, plugs, wires, complete dizzy with new cap/rotor, map sensor, TPS.
Once I got it I verified compression is good. mechanical timing is right. plugs were new but sooty black across the board. I pulled the ECU and the caps all look good inside. So I'm leaning now towards massive overfueling. Besides the ECU is there any other way that injectors can stay open? some kind of short maybe (is there a resistor pack) Any tips for testing fuel pressure at the rail? I'm leaning towards bad pressure regulator or plugged return line. Any other thoughts or ideas? Thanks |
Feb 24, 2016 - 2:27 PM |
|
Moderator Joined Jun 29, '08 From Denver Currently Offline Reputation: 59 (100%) |
Hane you checked the FPR?
-------------------- "Employ your time in improving yourself by other men's writings, so that you shall gain easily what others labored hard for." -Socrates. Even Socrates told us to use the search button!
2006 Aston Martin V8 Vantage. 1998 Celica GT- BEAMS Swapped. 2022 4Runner TRD Off Road Prenium. 2021 GMC Sierra AT4. |
Feb 24, 2016 - 3:31 PM |
|
Enthusiast Joined Feb 23, '12 From Warrior, AL Currently Offline Reputation: 0 (0%) |
Coolant temp sensor, for the ECU, can also cause it to run overly rich to the point of being undrivable. I'd check it before the FPR as it's easier and less messy.
There's another coolant temp sensor that goes to the gauge in the cluster. So the one for the ECU can be bad without anything weird showing in the gauge. -------------------- 2001 Miata LS 5-speed
|
Feb 24, 2016 - 5:19 PM |
|
Enthusiast Joined Dec 8, '03 From Lancaster CA Currently Offline Reputation: 6 (100%) |
also check the O2 sensors
-------------------- 2001 Celica GT-S Turbo
1997 Supra TT 6speed 1997 Celica 3MZ/1MZ swap 1990 Celica All-Trac |
Feb 24, 2016 - 6:59 PM |
|
Enthusiast Joined Jun 21, '11 From Oregon Currently Offline Reputation: 0 (0%) |
Thanks for the ideas but I managed to figure it out. The destruction of the primary cat led to the failure of the secondary cat. Car runs great now with both cats punched. (fortunately I'm in a non-emissions area)
|
Feb 25, 2016 - 12:50 AM |
|
Enthusiast Joined Feb 23, '12 From Warrior, AL Currently Offline Reputation: 0 (0%) |
Should've scrapped them and just welded in cheap mufflers or straight pipe, would've made money.
-------------------- 2001 Miata LS 5-speed
|
Feb 25, 2016 - 1:48 AM |
|
Enthusiast Joined Jun 21, '11 From Oregon Currently Offline Reputation: 0 (0%) |
don't have welding capability at home and live 30 miles from the nearest town. Running is worth more than scrap, at least in terms of convenience.
|
Lo-Fi Version | Time is now: November 29th, 2024 - 6:35 AM |