WTB: 7AFE Aftermarket Injectors, Who's got em? Options

[d3monc3lica]

Just looking to see who's selling some after-market injectors for the 7AFE. I'm mostly interested in RC Engineering 550cc injectors, but lets see whats out there...?anyone?

[doGGy]

Just searc for MX6 / Ford Probe turbo injectors, they will do the trick.. they are Hihg impedance, and 310 CC. So they are enouth till maybe 200-220 hp.. and they are kinda cheap.

[d3monc3lica]

thanks for the tip but im going bigger i think, if i decide to go cheaper ill go that way, if not ill just go strait for the RC E 500cc injectors, what the hell, go for it i say!!

[doGGy]

Good luck controling them with the S-AFC... they are almost 2.5 time bigger then stock, so first of all you have to know how your ECU will react with them...

You already made one big mistake dude... if you going for big project, S-AFC is no good at all... Emanage if you looking for a goo thing, or Stand alone.. there is no other way.

Bigger is not always better. Ah, what ever, what do i know I just building my own kit for 2 years, and making lots and LOTS of research about this engine. instead of blowing it at the first 1000 miles...

thanks for the tip but im going bigger i think, if i decide to go cheaper ill go that way, if not ill just go strait for the RC E 500cc injectors, what the hell, go for it i say!!
[right][snapback]229679[/snapback][/right]

This post has been edited by doGGy: Jan 4, 2005 - 2:25 AM

[nik]

doggy knows alot when it comes to the 7afe to hit 200 whp you will probably be pushing over 10-12 psi i'll probably be switching to 400-550 cc injectors this summer but i have the emanager to control them safc can only do so much but is a good tool for low boost tuning with smaller injectors

This post has been edited by nik: Jan 4, 2005 - 2:45 PM

[d3monc3lica]

hmmmm well Doggy ill go with stock injectors for now with the SAFC until i can afford and order the emanage, when u order it tho i what other things do i need to order with it, the harness most likely but is there a bunch more stuff cuz i need to know how much im going to spend on it so i can start saving up.

[nik]

both doggy and i have the emanager with ignition/injector harness ebay 70 for both or you can buy just the ignition 30-40 it comes with extra clip and wires so you can make your own injector harness also.

doggy got the gt4 map sensor
i got the greddy 3 bar pressure sensor
doggy probably has the disk for labtop tuning maybe throw him a few bucks for a copy of the disk
i can tune through my profec e-01

[doGGy]

Well, i will let you a secret As noone asked me before, But i said, IGNITION/Injectors wiring is EASY and cheap to make your self. The optional plug on emanage is like practicly all MAZDA interior wiring plugs, so go to scrap yeard and check this out you got the plug, now go and get some wires, with colors like on greddy emanage, solder them into the plug, and here ya go, you just saved 70$


Second, there is a yahoo groups about emanage, there you can get PC cable for hal;f price (50$ + shipping) and you can even get 3 bar map for about 30$. And there is lots of info.

Third, software can be found on the net too (yahoo groups ) for free

so now lets count 269 for emanage + 5$ for ignition/injectors wiring, 50$ for cable and free software... so you got 324$... full packadge...



And Nik, 3 bar greddy map sensor is optional, you still must use your stock MAP, the optional map is just for emanage, that you could more accuratly adjust your fuel tables, then stock map exceds his limits... and then you tune your car on dyno, it is not nessesary..

both doggy and i have the emanager with ignition/injector harness ebay 70 for both or you can buy just the ignition 30-40 it comes with extra clip and wires so you can make your own injector harness also.

doggy got the gt4 map sensor
i got the greddy 3 bar pressure sensor
doggy probably has the disk for labtop tuning maybe throw him a few bucks for a copy of the disk
i can tune through my profec e-01
[right][snapback]229869[/snapback][/right]

[d3monc3lica]

well, my deal with the remanufactured head went bad i guess so it will probably go into the emanager next month after my rims. thanks Doggy and Nik

[Hanyo]

why is doggy putting all this great information in the buy/sell section.

Doggy you need to do a write up or something to tell the rest of us how your turbo project is going.