Someone please help me with my intake, who will meet the challenge???? Options

[capncrakhed]

Got my injen intake for my 98 GT installed a couple days ago

except for 1 thing.....where does the red injen hose go??

its about 6 inches long....and i have no idea where it goes...will anything harm my engine if i leave this thing off??

[95STCelica]

Isn't that the MAS?

if you leave it out, your car will idle funny and back fire, you will need it unless your running Stand Alone EMS or an AFC ..so basically, you need it

This post has been edited by 95STCelica: Apr 15, 2003 - 11:12 PM

[capncrakhed]

ok

so.....where does it go?

[95STCelica]

There should be a hole on the right side of the intake facing the driver front tire (not too familiar with injen tho) The MAS goes to the ecu, its a wire, not an air tube. The air tube is the crankcase vent, I believe you don't need that line. Someone check my info, i'm new with engine stuff but i know the basics.

[Phat_99CeliGT]

if its a silicone hose, it goes from the intake tube to the valve cover.
If u don't want it there, u can plug the intake hole and get a breather filter for the valve cover. It looks likea mini air filter.

[maikl]

i dont know how to explain it to you but i think is the oil exhaust right on the midle of your valve cover is a hole who normaly had a hose conected to your original air filter so you have to take the red injen hose from there and put it in your filter

[Travis]

Bro, had the same question on mine, no of my boys knew, the hose that comes out I guess your's is red, (have the Weapon R mines blue) the hose isn't nessecary, took it off and installed a APC air breather on the hole. Works great, just make sure if you take it off, cover it! so no crap gets sucked into your sh*t!

[White_GTS]

Hey are you guys talking about the thing that is plugged right under the EA in the Weapon R word? I don't have that thing plugged in I just covered it up with tape. Thats okay right?

http://ebay2.ipixmedia.com/abc/M28/_EBAY_e...c178625/i-1.JPG

[FallenHero]

Just as long as it's plugged. I shoved a spent 7mm cartridge in the tube.

I ran the tube under the battery and it looks like it's actually doing something.

[snadman]

LOL. I found the place...

It took a while yes but there's a spot for it...there's a black silicone hose that's the same size and is hose clamped to a little port on side of the intake...just take that off...i think i dunno where i put it but yeah put the red on in its palce.

[Travis]

Yep, tape's fine on the hole 7mm shell, hey whatever works right? but I'm tellin ya, the little APC breather from Advance for chup change works and looks good. Trust me don't, do not run that sh*t to you air intake on you manifold like says on instructions, gonna make engine mad....thought hey, what the hell air in, more air in through, can't be bad right, just air. Wrong my computer had no idea how much air to take, my RPM's kept jumping from 2000 to 4000 in secs.

[Travis]

Yep, tape's fine on the hole 7mm shell, hey whatever works right? but I'm tellin ya, the little APC breather from Advance for chup change works and looks good. Trust me don't, do not run that sh*t to you air intake on you manifold like says on instructions, gonna make engine mad....thought hey, what the hell air in, more air in through, can't be bad right, just air. Wrong my computer had no idea how much air to take, my RPM's kept jumping from 2000 to 4000 in secs.