Tails, clear turns, rims, couple a pics Options

[FSX_Celica94GT]

Heres some updates of my celica

JDM tails


just got my clear corners in too, too embarassing how i installed them tho


Also, i have a question. Are these some sort of "extra" kind of wheels that were in some sport package or something? because ive seen them on 2 other celicas in town, but i have never seen anyone but me on 6gc.net that has them. They're 16"x7" i think, not exactly sure how wide they are, but they are 16's tho.


This post has been edited by FSX_Celica94GT: May 21, 2005 - 8:26 PM

[BLINKYxMUNKEY]

w00tw00t...loving the tails. needs a drop tho..like everyone else.

[dustin15brown]

Hey I fall in that category... I need a drop

[FSX_Celica94GT]

i would really like to know about my rims, kinda bothers me to know that i havent seen anyone else on here w/ them, but 2 others in my town.

[creis]

those the 5th gen turn signals? I might just have to go get a set.

[FSX_Celica94GT]

yea, they look better than i thought they would. they really stick out and add a lot of style, kinda hard to put em in cuz the screw isnt the same angle as the stock ones, but you'll find a way to get em in.

[mark_426]

how did you put them in thats embarassing? duct tape? velcro?

[RallyK]

Teehee, Velcro.

[FSX_Celica94GT]

No, actually, my friend has a teg GS, and he got some ebay turn signals, *you get what you pay for*, and they were really loose when he screwed them in, so he had to use double sided really sticky weather tape. So I used some on mine......o, and some silicon lol, gotta be careful not to get it on your paint, if you get it on there just use water, take it right off, so clean the area after you're done. It holds very well.

[FSX_Celica94GT]

No, actually, my friend has a teg GS, and he got some ebay turn signals, *you get what you pay for*, and they were really loose when he screwed them in, so he had to use double sided really sticky weather tape. So I used some on mine......o, and some silicon lol, gotta be careful not to get it on your paint, if you get it on there just use water, take it right off, so clean the area after you're done. It holds very well, so i actually used both things, tape for cushioning and silicon for placement.

oops...

This post has been edited by FSX_Celica94GT: May 23, 2005 - 10:58 PM

[95celgt]

I have your rims, they came with my vert, now i just have them stacked up with my RX7's wheels in the backyard, oh and they are not 16's, they are 15's, read your tires . it says"ZR15". Oh, what turns did you use in the bumper so i can get some , really it looks good!

[CelicaQT]

Oh, what turns did you use in the bumper so i can get some [right][snapback]292040[/snapback][/right]

I believe he's got the same turns as I do. They're from procarparts.com
Here's the linky:
Sidemarkers

This post has been edited by CelicaQT: May 26, 2005 - 1:46 PM

[FSX_Celica94GT]

get em off ebay, a lot cheaper and same quality

[FSX_Celica94GT]

I have your rims, they came with my vert, now i just have them stacked up with my RX7's wheels in the backyard, oh and they are not 16's, they are 15's, read your tires wink.gif . it says"ZR15"

So are they stock rims? If so, how come nobody else has them on this site? Anyway, they're a lot better looking than the regular 15" ones, thats for sure.

[95celgt]

not those, the bumper lights.

[ILuvMyCelica95]

the turn sig he has are for the 5th gen i think- procarparts has them too, the fit in a 94-95 but they are smaller and the screw doesnt line up the same...