 moisture in projectors |
 Nov 8, 2005 - 3:45 PM
|
 
|
 Enthusiast  Joined Aug 30, '02 From Ohio Currently Offline Reputation: 0 (0%)  |
i just got my HIDs installed and later that night it already had moisture in them.
i clamped the HID down in the housing like with the stock bulb, and put the big rubber cap back on(didn't have it on B4). now there is moisture in them. anyone know what i can do? w/o having to take them off. -------------------- Jared Harwell
 |
 |
Replies
(1 - 7)
|
Nov 8, 2005 - 3:47 PM
|
|
 Enthusiast Joined Jan 28, '05 From Redondo Beach, CA Currently Offline Reputation: 86 (100%) |
hair dryer or blow it out.
--------------------  |
|
Nov 8, 2005 - 4:24 PM
|
|
 Enthusiast Joined Mar 8, '04 From Newport, RI Currently Offline Reputation: 63 (99%) |
get a can of compressed air, like the kind to dust off keyboards, and blow it dry.
-------------------- |
|
Nov 8, 2005 - 5:43 PM
|
|
 Enthusiast Joined Nov 2, '04 From MILANO City Italy Currently Offline Reputation: 0 (0%) |
Uh, have you installed a xenon kit on your jdm light? or only HID bulb ...because i would like to install on mine but i dont know if the stock h1 bulbs are the same of h1 xenon bulb ....
-------------------- #Simosbraz#
Vice President of Celica T20 Italia MILANO City MI TOYOTA CELICA 1.8cc >> SS-III JDM Look ,3S-GE >> Wolf in progress... My Photo Gallery |
|
Nov 8, 2005 - 5:46 PM
|
|
|
Enthusiast Joined Nov 22, '04 From FL Currently Offline Reputation: 1 (100%) |
I have seen fish swimming in headlights.. but that was a custom made tank fitted there.. Your best bet would be to hook it up to a industrial vacuum cleaner like one sold in home depot. Other ways would include flipping it with hole down and let it drain. cause you will never be able to get 100 percent of it out by using a paper towel and what not.
-------------------- Captain Pessimist
|
|
Nov 8, 2005 - 8:35 PM
|
|
 Enthusiast Joined Jul 5, '05 From New York ~ San Francisco Currently Offline Reputation: 0 (0%) |
Well sometimes it's a normal thing to have little moisture in the head lamps, I'm guessing you installed the HID kit on a (Foggy, Wet, Raining) or anyday like this?
The best way to fix this problem would be ... 1. Wait for a sunny day, temp around 65 ~ 70 degress or find a spot where sun hits the hottest around your area & Let the head lamp hit that sun light. 2. After the moisture is dry from the hot sun light reinstall the bulb once again & make sure the light bulb is secured tightly as the stock ones did. It happened to my 350z after changing the front parking light on the head lamp as well & that's what I did to get te moisture removed. Best Of Luck 
|
|
Nov 14, 2005 - 3:27 PM
|
|
|
Enthusiast Joined Aug 30, '02 From Ohio Currently Offline Reputation: 0 (0%) |
i fixed it.
i just took the rubber cap off and a day later it was clear. -------------------- Jared Harwell
|
|
Nov 14, 2005 - 3:43 PM
|
|
 Enthusiast Joined Feb 10, '03 From Connecticut Currently Offline Reputation: 11 (100%) |
Thats evaporation, you havent fixed it just dried them out, some moisture could have gotten in them w/o them being sealed for however long...
This post has been edited by Supersprynt: Nov 14, 2005 - 3:44 PM -------------------- |
 |
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
| Lo-Fi Version | Time is now: November 23rd, 2024 - 3:34 PM |