7a-fte update, ATP I'll get my revenge Options

[southwest2118]

ok today I got my cheap egay filter..




And my atp restrictor and t3 oil outlet gasket. the restrictor is weak
i can only get the 1/8 npt male in like 15% of the way in then it feels
like I'm about to cross thread. i emailed them and ......




last week i spent like $30 at summit and all i got was this pimpin hat.
.....i got my 24" -3an line and some -3an to 1/8 npt adapters too.

[southwest2118]

OK this weekend i'ma start intalling the turbo.
By friday I should have bov, s-afc, and injectors.

[Dr_Tweak]

You can't tighten NPT threads all the way, that's how they seal, they're tapered. Once they're that tight, you'll all set.

-Doc

This post has been edited by Dr_Tweak: Mar 8, 2006 - 3:29 AM

[southwest2118]

thats true but i got like 5 threads in? i talked to atp and they should be sending me another.

[Dr_Tweak]

It won't be any different As long as you get it in there tight, you're set.

-Doc

This post has been edited by Dr_Tweak: Mar 8, 2006 - 5:11 AM

[southwest2118]

hey doc what do you think about the restictor
causing foaming? at 60 psi that oil is going
through that little hole pretty fast right? and
you think i should put it at the TEE or right on
the turbo...dose it matter? -3an with a restrictor
shouldn't be a problem right.?

[Dr_Tweak]

Trouble is, whether or not you need it is dependant on quite a few factors. Some people use them and blow thier turbos, some people don't use then and blow their turbos.

Well, what I typically do is run a 1/8" line (3AN) with no restrictor, and a nice big, straight return line. If the turbo is still getting too much oil, then I'll try the restrictor.

-Doc

[southwest2118]

Trouble is, whether or not you need it is dependant on quite a few factors. Some people use them and blow thier turbos, some people don't use then and blow their turbos.

-Doc

WTF


-------------------------------------------------------------

well if the turbo is getting to much oil...when
you find out won't it be to late? blown seals? i get like 60psi on start up and throttle

This post has been edited by southwest2118: Mar 8, 2006 - 6:24 AM

[Dr_Tweak]

Depends on the engine and the turbo, along with the size of the oil feed and return lines... I don't know of any OEM turbo engines that have restrictors intalled.

-Doc