My Audio system is almost done Options

[Niskyspy]

As of right now:
Panasonic CQ-C9401U deck
JBL BP1200.1 AMP wired at 2ohm's = 1200Watts RMS
JLAudio 12" W6v2 wired at 2ohm's
MbQuart Discus 6.5" speakers
Alpine (RCA sub-amp gain) controller
Whip Audio 1.5 farad capacitor
4ga power/ground

In next two weeks:
Fuse distro by stinger
4ch amp JBL P80.1 60watt RMS to 4ch
AudioControl Matrix Line driver

In 1-2 month:
MbQuart Premium coaxial speakers w/crossover

This is whats going to be my system for the summer: if I have $$$ around I might get
Eclipse CD8000 deck with time alighment but that probably wont happen cuz I am not
into spending $650 on a deck.



So what do u think?

[devilsden97]

As of right now:
Panasonic CQ-C9401U deck
JBL BP1200.1 AMP wired at 2ohm's = 1200Watts RMS
JLAudio 12" W6v2 wired at 2ohm's
MbQuart Discus 6.5" speakers
Alpine (RCA sub-amp gain) controller
Whip Audio 1.5 farad capacitor
4ga power/ground

In next two weeks:
Fuse distro by stinger
4ch amp JBL P80.1 60watt RMS to 4ch
AudioControl Matrix Line driver

In 1-2 month:
MbQuart Premium coaxial speakers w/crossover

This is whats going to be my system for the summer: if I have $$$ around I might get
Eclipse CD8000 deck with time alighment but that probably wont happen cuz I am not
into spending $650 on a deck.



So what do u think?

Looks like a wiring diagram...screw diagrams, lets see how it hits! (pics and maybe a possible video?)

[JFrost9]

doesnt that sub only put out like 400 rms? Im kinda confused on the set up. is your 1200 watt rms amp just going into the sub? Seems like a good set up. if that other amp is puttin out 60 rms id go with some decent components maybe run the rears off the headunit and then use the amp to just power the components. and then move those front speakers to the rear. my 2 cents.

This post has been edited by JFrost9: Mar 14, 2006 - 3:21 PM

[Niskyspy]

doesnt that sub only put out like 400 rms? Im kinda confused on the set up. is your 1200 watt rms amp just going into the sub? Seems like a good set up. if that other amp is puttin out 60 rms id go with some decent components maybe run the rears off the headunit and then use the amp to just power the components. and then move those front speakers to the rear. my 2 cents.

Thanks,
Well yea it is kinda weird that I am using a 1200Watt RMS JBL amp to push 400Watt RMS JL subwoofer. But I am going for SQ and using an amp that has really high RMS but using only 1/3 of its power will make the sound more crisp and better overall. And yes I will be upgrading to MbQuart Premium components which will make it sound really good. Here are some pics that I got today, The little JBL amp is the P80.4 that I got today. Well thats it.
PS. As of today I am planing on getting an Eclipse 8000 deck, the older/used one for about $200, because for $200 I can have 8V pre-out, Pqequalizer and timedelay. Or for the same $200 buy a matrix line driver. So I think its a better choise to go with a new deck.