6G Celicas Forums

Welcome Guest ( Log In | Register )

> Damage Pics -- High Res (56K This is gonna HURT)
post Aug 14, 2006 - 10:12 PM
+Quote Post
Fastbird

Enthusiast
*****
Joined Jun 25, '05
From Fort Wayne, IN
Currently Offline

Reputation: 14 (100%)




Ok, I just got to take a "with my own eyes" look at it. It's not nearly as bad as I was anticipating, but there's a definitive crease in the lower portion of the dent, and the upper portion at the top has a bit of a crease, and there's a dent in the door visible in a couple of the pics.

Looking pretty much straight down on it (disregard my white bummin' shoes):
IPB Image

A standing look -- you can see the crease in the center and straight to the right you can see the dent in the door:
IPB Image

Dent Depth:
IPB Image

Forward view:
IPB Image

Farther forward view:
IPB Image

Hopefully it can be fixed without painting, but I'm not holding my breath. I'm taking it to a couple of places on Wednesday or Thursday for estimates, and depending on the outcome we'll either have the entire car painted or just have the quarter panel fixed.

Also, after seeing it first hand, and "testing" the body panel on that and the other side, that cart hit our car with some freaking FORCE, no doubt about that. I have no doubts that this was NOT a case of a runaway cart.

This post has been edited by Fastbird: Aug 14, 2006 - 10:15 PM


--------------------
2 Pages V   1 2 >  
Start new topic
Replies (1 - 22)
post Aug 14, 2006 - 10:16 PM
+Quote Post
6strngs



Enthusiast
*****
Joined May 12, '06
From Wilmington, NC
Currently Offline

Reputation: 45 (100%)




yeah, there's no way that a cart would be able to put that big of a dent in a car without someone pushing it... extremely fast... that sucks dude, hopefully your wife's work will pay for it all though.


--------------------

94 GT - Sold -------- 69 Pontiac Lemans - Sold
88 Alltrac - Sold ---- 04 WRX - Sold
00 GT-S - Sold ------ 91 Miata - project/drift car
95 GT - Sold -------- 96 GT - New Daily Drive
post Aug 14, 2006 - 10:24 PM
+Quote Post
DomGT



Enthusiast
***
Joined Apr 19, '06
From Long Island, NY
Currently Offline

Reputation: 13 (100%)




mad.gif mad.gif mad.gif


--------------------
'92 Grey Mitsubishi 3000GT SL - Sold
'96 Black Celica ST 25th Anniversary - Sold
'99 Black Mitsubishi 3000GT VR-4 - Sold
'04 E250 Work Van - Going soon
'08 Grey Dodge Charger Work Car - Ordered
post Aug 14, 2006 - 10:29 PM
+Quote Post
laff09

Enthusiast
***
Joined Jul 28, '06
From Delaware
Currently Offline

Reputation: 0 (0%)




I Own A .357 bumpersticker comes to mind..
post Aug 14, 2006 - 10:29 PM
+Quote Post
lagos



Enthusiast
*****
Joined Aug 31, '02
From Philadelphia, PA
Currently Offline

Reputation: 8 (100%)




2 words:
suction cup.

pop that thing right out.


--------------------
15PSI - 30MPG - Megasquirt Tuned
post Aug 14, 2006 - 11:15 PM
+Quote Post
Chanh55

Enthusiast
*****
Joined Jun 29, '03
Currently Offline

Reputation: 0 (0%)




Lol... I take it back. Dent King isn't gonna do sh*t to that... hahaha. Dude that really really sucks.

At least you did a great job detailing her... check out someones painted toenails. =)

IPB Image

This post has been edited by Chanh55: Aug 14, 2006 - 11:18 PM
post Aug 15, 2006 - 12:02 AM
+Quote Post
KB-2

Enthusiast
***
Joined Jul 6, '06
Currently Offline

Reputation: 1 (100%)




that blows ass

a logn tiem ago, i got hit by a large BRICK. due to i had to go into the ghetto to get something, and i got hit by a brick, and didnt feel liek picking a fight w/ the mobsters. lol


--------------------
IPB Image

KB
post Aug 15, 2006 - 1:43 AM
+Quote Post
playr158



Enthusiast
*****
Joined May 22, '03
From NOVA
Currently Offline

Reputation: 16 (100%)




get one of those suction cup things from advanced auto should pull nearly all the way out
post Aug 15, 2006 - 1:47 AM
+Quote Post
hitcachi



Enthusiast
*****
Joined Jun 19, '05
From Nebraska
Currently Offline

Reputation: 4 (100%)




Holy tits, thats bad. i dont understand people, and their consistency to be dousche bags.


--------------------
Teh Celica sleeps for Winter '06. Suspension overhaul begins........
post Aug 15, 2006 - 1:57 AM
+Quote Post
vsideboy



Enthusiast
***
Joined Mar 29, '06
From Hull, UK
Currently Offline

Reputation: 0 (0%)




leave it to a professional mate, yeah the suction cups are ok, but you may pull 1 bit that causes a crease in another bit.

If the cart had been overflowing with crates of beer and it had been going downhill then it would have enough force to do that, we all know how hard they are to steer sometimes (well all the time lol.)
post Aug 15, 2006 - 5:29 AM
+Quote Post
presure2



Moderator
*****
Joined Oct 1, '02
From fall river, ma
Currently Offline

Reputation: 13 (100%)




ouch that sucks man...had almost the same thing happen to the wifey @ one of her old jobs..only mine was in the passanger front fender.
hope its a easy fix for ya!


--------------------
Former Team 5SFTE pro member ;)

13.6@108MPH, 5SFTE Powered
post Aug 15, 2006 - 7:00 AM
+Quote Post
Fastbird

Enthusiast
*****
Joined Jun 25, '05
From Fort Wayne, IN
Currently Offline

Reputation: 14 (100%)




Ok, that's my wife's foot in that picture before you all start cracking jokes!!!! biggrin.gif

I took a closer look last night and unfortunately the dor jamb has been pulled open from the impact. I think it's going to take a lot of time and effort by a body shop to make it look right and flawless like it did.

I'm going to get estimates tomorrow, and will also be getting estimates for an entire paintjob to inlcude cleaning up the hatch (from teh spoiler removal), removing a few door ding dents, and possibly shaving the door handles and front marker lights.

Here's something for everyone though: You know that polish system I used on Saturday that I posted the after pics from??? This little incident is a testament to how protective it is. The paint isn't even scratched. There's some swirl mark type scratches, but no gouges or anything. biggrin.gif


--------------------
post Aug 16, 2006 - 12:22 PM
+Quote Post
Fastbird

Enthusiast
*****
Joined Jun 25, '05
From Fort Wayne, IN
Currently Offline

Reputation: 14 (100%)




Estimates are in: $1400 to $1500 in damages between the crease on the door and the 1/4 panel dent. Now......

For another $2300 we can have the entire car repainted (anything that bolts on comes off, all glass out, weatherstripping and trim out, front and rear bumpers removed, rockers removed, mirrors removed, hatch and hood removed), all dents removed, and hatch holes from spoiler patched and welded. Gotta think about that one though because we just simply may not have the money for it right now. Going to talk with the wife tonight and go from there. Hoping to have it in the shop next week.


--------------------
post Aug 16, 2006 - 12:54 PM
+Quote Post
lagos



Enthusiast
*****
Joined Aug 31, '02
From Philadelphia, PA
Currently Offline

Reputation: 8 (100%)




before you go all out with the repair bills... why dont you try to fix it on your own? the paint isint chiped at all, so all you have to do is pop out the dent. you can try a suction cup, or you can remove the interrior plastics and push it out from the inside of the car.. if you mess up, then who cares... you can always pay to have it fixed.



--------------------
15PSI - 30MPG - Megasquirt Tuned
post Aug 16, 2006 - 1:23 PM
+Quote Post
Fastbird

Enthusiast
*****
Joined Jun 25, '05
From Fort Wayne, IN
Currently Offline

Reputation: 14 (100%)




Because I'd rather not possibly make things worse. The shop that we're having the work done explained it exactly as I thought, that the metal is stretched and by simply trying to pop it back out more it would cause more stretch and be harder to fix overall. Besides, we're not paying the damage bill!! biggrin.gif


--------------------
post Aug 16, 2006 - 8:21 PM
+Quote Post
airfron



Enthusiast
***
Joined Jul 31, '05
From Southern California
Currently Offline

Reputation: 7 (100%)




i don't have 56k and it still hurt.. don't you wish you could of caught the person who did it in the act...

you might as well try to push it out or use a suction cup because isn't the repair shop just gonna do that and then try to fix whatever damage that causes afterwards... or did they explain some other way they would repair it?

but if you aren't paying for the damage then why even bother smile.gif


--------------------
post Aug 16, 2006 - 8:37 PM
+Quote Post
Fastbird

Enthusiast
*****
Joined Jun 25, '05
From Fort Wayne, IN
Currently Offline

Reputation: 14 (100%)




QUOTE(airfron @ Aug 16, 2006 - 9:21 PM) [snapback]469794[/snapback]
you might as well try to push it out or use a suction cup because isn't the repair shop just gonna do that and then try to fix whatever damage that causes afterwards... or did they explain some other way they would repair it?


They're going to use head to shrink the metal back into place. Bill (guy doing the work) showed me the machine he uses. It attaches and heats the metal to the point of tightening back into place, and then he mallets it as close as possible, then body fills and blocks any leftover depressions. That's a brief synopsis at least.


--------------------
post Aug 16, 2006 - 8:47 PM
+Quote Post
Steevo



Enthusiast
*
Joined Jul 19, '06
From Colorado
Currently Offline

Reputation: 0 (0%)




A friend does paintless dent repair and clearbra for hoods and the like. Very well respected. He did a job on a show Viper that has won awards for the paint and finish.


I believe he is in Florida for business for the week. And supposed to be on the east cost alot in the next month.


post Aug 16, 2006 - 9:04 PM
+Quote Post
bloodrain

Enthusiast
*****
Joined Mar 3, '05
From Hollywood, FL
Currently Offline

Reputation: 0 (0%)




edited

This post has been edited by bloodrain: Aug 16, 2006 - 9:04 PM


--------------------
To live, is to suffer
To survive, thats to find meaning, in the suffering....
user posted image
post Aug 16, 2006 - 9:33 PM
+Quote Post
chucho



Enthusiast
*****
Joined Mar 23, '03
From New Orleans
Currently Offline

Reputation: 5 (100%)




Man, that really sucks, i'd be furious
post Aug 17, 2006 - 2:49 PM
+Quote Post
mzztoyota



Enthusiast
***
Joined Jul 20, '06
From St. Thomas, Virgin Islands
Currently Offline

Reputation: 0 (0%)




Errrrg, I hate stupid, jealous, idiotic people.

I'm sorry, man, that does suck...at least you have the green to fix it, though. If someone did that to my car right now...I'd be SOL with a dented car, lol.


--------------------
IPB Image
"I bet you drive a standard." "You could make some money off that bet." :D
post Aug 17, 2006 - 4:13 PM
+Quote Post
illneversellmyce...



Enthusiast
****
Joined Jul 11, '06
From Sefner, FL
Currently Offline

Reputation: 24 (100%)




sucks dude hope everything goes well, i'm going to be terrified to park my ride anywhere after i get my kit and paint job this month!!


--------------------
IPB Image
post Aug 19, 2006 - 11:56 AM
+Quote Post
CelicaBuddy

Enthusiast
*****
Joined Nov 1, '04
Currently Offline

Reputation: 1 (100%)




Wow that's quite a dent from just a shopping cart...

Ughhhh.... That blows....


--------------------

1995 Convertible Celica
2003 Nissan Murano SE

2 Pages V   1 2 >
Reply to this topicStart new topic
3 User(s) are reading this topic (3 Guests and 0 Anonymous Users)
0 Members:

 



Lo-Fi Version Time is now: December 2nd, 2024 - 12:53 PM