projectors help please, wiring ahhhhhh Options

[95silvergt]

ok i need to know is it just plug and play with cutting a 9006 connector and replacing it with the h1 is it just where u cut the 2 wires and crimp the replacing connector and ur good or do u like match the wires wit the stripe in them and call it good does anybody have pics or like could help me out thanx.

[Batman722]

did you see this ?

http://www.6gc.net/forums/index.php?showtopic=27644

[95silvergt]

did you see this ?

http://www.6gc.net/forums/index.php?showtopic=27644

yea i understand that but im goin from a h4 connector to a 9006 i was just wonderin is it just like cut and crimp that is it doesnt matter on what wire is what as long as i connect them that is my ? can i just do that.

[ILuvMyCelica95]

did you see this ?

http://www.6gc.net/forums/index.php?showtopic=27644

yea i understand that but im goin from a h4 connector to a 9006 i was just wonderin is it just like cut and crimp that is it doesnt matter on what wire is what as long as i connect them that is my ? can i just do that.

you're making this more complicated then it is. You're going from a 9006 to an H4 you cut off the two wires coming out of the 9006 harness. You crimp them to the h4 harness. What do you mean what wire? I think i know what you mean and it doesn't matter.

[jason]

dont cut!!!!!!


i just got h4 connectors, pulled the one wire out of it so it was just the 2 that i need so it looks all clean, then the other end of the pig tails i just stripped them and tinned? them (made stiff w/ solder) then just inserted into the existing 9006 harness - this way no cutting and going back to stock is still possible, plus it looks clean =) just get diff diameters of heat shrink and make it all weather proof then, im working on that now actually

took 3rd wire out


simple connection no cutting

[ILuvMyCelica95]

lol Jason you and I just took the same pictures of the connector.

the reason i cut the old connector off is because i swapped headlights with someone who had projectors and cut off the orig connector so they needed the 9006 connectors back. The other reason is if i ever decide to sell my car I might want to sell the projectors separately then i can just the h4 connectors off and crimp the old ones back on.

i hope you don't mind Jason but i'm adding your pics to my projector thread in the sticky.

This post has been edited by ILuvMyCelica95: Mar 29, 2007 - 6:21 PM

[jason]

i have detailed pics on taking off & puttin on the bumper & fenders along with wiring for projectors and the 194 bulb in the side, i think 70 or 80 pics not sure plus about 20 of them on n running, going to eventually do a nice write up so everyone can enjoy them =)