98 GT CAI install question, where does this go Options

[Andason]

I understand where the breather and the o2 sensor goes. but what is this thing i pulled out real close to where the stock intake meets the intake manifold setup. Right now its hanging on the firewall. It's an L shaped thing that I had to pull out to get my stock intake off. Should I drill into the plastic to fit it in there? Or isnt it important?

[Andason]

anybody?

[HyperDeathKill]

I'm gettin reaaalll confused here. Got pictures? And what CAI did you use btw for your GT?

[Andason]

Its' a weapon R. There was three things I had to pull out of my stock air system to put into my intake. There was the 02 sensor, the breather(to the block) and if you follow the intake towards the firewall, there was another thing i had to pull out of the stock air system real close to where the stock one ended and where the aftermarket intake meets up with the air intake system. The little L shaped elbow peice (probably about in inch big with a rubber hose going down to the bottom of the car. My car is from CA so I was wondering if this was some sort of regulator or something? (I'm from WI where we don't do emission tests. )

Anyone have any idea wtf this thing is?

[HyperDeathKill]

hmmm yea probably is. Just run without it, see if you get a CEL. If you don't then forget about it.

[TigerWoodsJr]

there is the rubber hose on each side of the CAI...one for the 02 and the other one for that L shaped thing...atleast thats how I had it hooked up.

[Andason]

where did you put the breather on the motor then?

[Stealths95GT]

do you mean that piece of metal ( 2 pieces actually )...if so you need to connect that to your car and then to the breather...it's keeps it stable..but make sure u make the bolts tight..hehe i lost one driving around...if you need any questions...hit me up... latazz

ps: i installed the same intake

[Andason]

AHHHH! no! lol, i know where the breather goes, and know where the o2 sensor goes! I know what to do there. Its a plastic L shaped elbow connected with a rubber hose!

[Andason]

THIS PEICE!!!
Lol

[TigerWoodsJr]

how does it sound?

[Andason]

its bad as hell, but i still dont know where that peice goes

[Toyota_guy31783]

Only cars from CA have those tubes. My car doesnt have one of those tubes. I am not sure exactly what it is for but i think it has something to do with smog/emission standards or something. I had to look it up because when i put on my intake i had an extra nipple on the underside of the intake and no hose to go to it. Right now my car is running with it open until i can get it closed.

[SiKBOY]

yeh, I have a nipple in my stock intake for that exact plug but I dont have a plug to plug it up with. Always wondered what it was for.

[lawbo]

I don't have this kind of intake yet.
here is the INSTRUCTIONS
http://www.weapon-r.com/dragipr5.html

How much did you buy it?
Where did you buy it?

[Andason]

QUOTE (lawbo @ Aug 5, 2003 - 11:08 AM)

I don't have this kind of intake yet. here is the INSTRUCTIONS http://www.weapon-r.com/dragipr5.html How much did you buy it? Where did you buy it?

I didn't need to use instructions. If you didn't notice those are only until 97 mine is a 98, It fits just fine but that doesnt go anywhere.