6G Celicas Forums

Welcome Guest ( Log In | Register )

> On the edge..., fte or gte
post Nov 22, 2007 - 12:46 PM
+Quote Post
frosty



Enthusiast
***
Joined Sep 1, '04
From Alabama
Currently Offline

Reputation: 0 (0%)




Alright, I have the money stashed for most of a turbo project, but it won't get started this year since I want to build a building to work in on the land we just bought. (plan to have it built sometime in feb of 08)

I'm not interested in the 3sgte, not that I don't like it, I just know that if I got one I would upgrade to much on it (mainly the turbo, and a stroker kit.) Gotta have more displacement since I grew up with v8s and you know the saying, "no replacement for displacement!" So why spend money for a different motor when I know so much more will be spent on upgrading it? I could save that money and use it for the current block in my car!

I know for sure I'm using the 5s bottom end. Will probably get different rods if I end up deciding on reving it past the rod bolts limit.

My biggest decision is which head to use. The fe or ge. After much reading/research on the mr2oc forums I have a new appreciation for the fe head and it's capabilitys. I'm not shooting for over 500hp like some of the mr2'ers that build like crazy. Haven't quite made my final decision on the hp #'s but it's good to know that the fe head can handle alot.

Since I can get the ge head for around $250, that cost isn't a concern. It's also not that big of deal to get it mounted to 5s block either. With either head I plan to run a full standalone so no problems there. I've already fully researched the ge head swap so I know of all the other things that may come up and I'm comfortable with it.

I basically just don't know which head I would be happier with. Both are capable of what I'm looking for, I guess I just don't know which would be cooler kindasad.gif . I don't know which I would be more proud to lift my hood and show off. After all my reading on the mr2 forums, I think the fe head might just do it since so many people don't believe it's really good at all.

(mabey I'll just build this on as an fte and buy another celica and build that with the ge head! biggrin.gif laugh.gif )

Oh well, thoughts anyone?


--------------------
IPB Image

CLOSED on 25 acres!

-shop coming soon....
 
Start new topic
Replies (1 - 11)
post Nov 22, 2007 - 2:09 PM
+Quote Post
presure2



Moderator
*****
Joined Oct 1, '02
From fall river, ma
Currently Offline

Reputation: 13 (100%)




QUOTE(frosty @ Nov 22, 2007 - 1:46 PM) [snapback]616603[/snapback]

Alright, I have the money stashed for most of a turbo project, but it won't get started this year since I want to build a building to work in on the land we just bought. (plan to have it built sometime in feb of 08)

I'm not interested in the 3sgte, not that I don't like it, I just know that if I got one I would upgrade to much on it (mainly the turbo, and a stroker kit.) Gotta have more displacement since I grew up with v8s and you know the saying, "no replacement for displacement!" So why spend money for a different motor when I know so much more will be spent on upgrading it? I could save that money and use it for the current block in my car!

I know for sure I'm using the 5s bottom end. Will probably get different rods if I end up deciding on reving it past the rod bolts limit.

My biggest decision is which head to use. The fe or ge. After much reading/research on the mr2oc forums I have a new appreciation for the fe head and it's capabilitys. I'm not shooting for over 500hp like some of the mr2'ers that build like crazy. Haven't quite made my final decision on the hp #'s but it's good to know that the fe head can handle alot.

Since I can get the ge head for around $250, that cost isn't a concern. It's also not that big of deal to get it mounted to 5s block either. With either head I plan to run a full standalone so no problems there. I've already fully researched the ge head swap so I know of all the other things that may come up and I'm comfortable with it.

I basically just don't know which head I would be happier with. Both are capable of what I'm looking for, I guess I just don't know which would be cooler kindasad.gif . I don't know which I would be more proud to lift my hood and show off. After all my reading on the mr2 forums, I think the fe head might just do it since so many people don't believe it's really good at all.

(mabey I'll just build this on as an fte and buy another celica and build that with the ge head! biggrin.gif laugh.gif )

Oh well, thoughts anyone?

if your not ready or not interested in swapping, gte is not for you.
its not as easy as you make it seem.
the fe head is good for at least 240whp...add cams...if your goal is sub 300whp...there really is no need for the g head.


--------------------
Former Team 5SFTE pro member ;)

13.6@108MPH, 5SFTE Powered
post Nov 23, 2007 - 6:04 PM
+Quote Post
frosty



Enthusiast
***
Joined Sep 1, '04
From Alabama
Currently Offline

Reputation: 0 (0%)




QUOTE(presure2 @ Nov 22, 2007 - 7:09 PM) [snapback]616626[/snapback]

if your not ready or not interested in swapping, gte is not for you.
its not as easy as you make it seem.
the fe head is good for at least 240whp...add cams...if your goal is sub 300whp...there really is no need for the g head.


It's not that I'm not ready or interested in the 3s-gte, I just don't see the point if I'm gonna stroke it out and change so much on it. Isn't the stroker kit for the 3s still well over 1k? I could throw that money elsewhere. And I know I could use the 5s crankshaft on the 3s but then I would want to bore out the block for larger pistons and I want save as much on the block as I can.

I know I make it sound easy and for me, it is. I'm used to metal working, welding, fabricating, wiring, ect.
This makes all the things I read about building a 5sgte seam easy. It's work I can do the majority myself without any concern. (the 5s will definitly not be my first motor to break down and build)

And with either a full motor swap, a fte build or a ge head swap, the whole motor is coming out no matter what. I would rather do most of this build outside the bay, and even with a 3s swap I would use a standalone ems so the wiring will be changed no mater what.

After all that I've read and seen, I believe the fe head can handle more than what you say. Besides cams, I would do atleast 1mm OS valves, new springs to help handle the new stress, and have some reshaping done to the ports.

And as You should know, with proper tuning anything can be possible, and with all that I plan on doing, the parts are proven to handle higher stress levels of 300+hp.

I'd probably do like alot of mr2'ers and run low boost for DD and have it built for higher boost for drag days.
Either the fe or ge head is good (stock) for only up to 300hp. Beyond that there needs to be modifications performed.

I just see people like you running your fte the same as those with 2nd gen 3sgte swaps and acheiving practically the same results. Go FE!


--------------------
IPB Image

CLOSED on 25 acres!

-shop coming soon....
post Nov 24, 2007 - 7:15 AM
+Quote Post
presure2



Moderator
*****
Joined Oct 1, '02
From fall river, ma
Currently Offline

Reputation: 13 (100%)




QUOTE(frosty @ Nov 23, 2007 - 7:04 PM) [snapback]616975[/snapback]

QUOTE(presure2 @ Nov 22, 2007 - 7:09 PM) [snapback]616626[/snapback]

if your not ready or not interested in swapping, gte is not for you.
its not as easy as you make it seem.
the fe head is good for at least 240whp...add cams...if your goal is sub 300whp...there really is no need for the g head.


It's not that I'm not ready or interested in the 3s-gte, I just don't see the point if I'm gonna stroke it out and change so much on it. Isn't the stroker kit for the 3s still well over 1k? I could throw that money elsewhere. And I know I could use the 5s crankshaft on the 3s but then I would want to bore out the block for larger pistons and I want save as much on the block as I can.

I know I make it sound easy and for me, it is. I'm used to metal working, welding, fabricating, wiring, ect.
This makes all the things I read about building a 5sgte seam easy. It's work I can do the majority myself without any concern. (the 5s will definitly not be my first motor to break down and build)

And with either a full motor swap, a fte build or a ge head swap, the whole motor is coming out no matter what. I would rather do most of this build outside the bay, and even with a 3s swap I would use a standalone ems so the wiring will be changed no mater what.

After all that I've read and seen, I believe the fe head can handle more than what you say. Besides cams, I would do atleast 1mm OS valves, new springs to help handle the new stress, and have some reshaping done to the ports.

And as You should know, with proper tuning anything can be possible, and with all that I plan on doing, the parts are proven to handle higher stress levels of 300+hp.

I'd probably do like alot of mr2'ers and run low boost for DD and have it built for higher boost for drag days.
Either the fe or ge head is good (stock) for only up to 300hp. Beyond that there needs to be modifications performed.

I just see people like you running your fte the same as those with 2nd gen 3sgte swaps and acheiving practically the same results. Go FE!

its not the head your gonna have to worry about.
its the puny rod bolts.
wink.gif
3s rods will fit if you grind the 5s rod journals down, or pauter ect makes rods for the 5s.
i dont know who told you the 3s head is only good for 300whp stock...the fuel system..maybe, but not the head my friend!
wink.gif


--------------------
Former Team 5SFTE pro member ;)

13.6@108MPH, 5SFTE Powered
post Nov 24, 2007 - 2:37 PM
+Quote Post
lagos



Enthusiast
*****
Joined Aug 31, '02
From Philadelphia, PA
Currently Offline

Reputation: 8 (100%)




Make it happen. smile.gif


--------------------
15PSI - 30MPG - Megasquirt Tuned
post Nov 28, 2007 - 10:53 AM
+Quote Post
frosty



Enthusiast
***
Joined Sep 1, '04
From Alabama
Currently Offline

Reputation: 0 (0%)




QUOTE(frosty @ Nov 22, 2007 - 5:46 PM) [snapback]616603[/snapback]

I know for sure I'm using the 5s bottom end. Will probably get different rods if I end up deciding on reving it past the rod bolts limit.



QUOTE(presure2 @ Nov 24, 2007 - 12:15 PM) [snapback]617094[/snapback]

its not the head your gonna have to worry about.
its the puny rod bolts.
wink.gif


Way ahead of ya there biggrin.gif

QUOTE(lagos @ Nov 24, 2007 - 7:37 PM) [snapback]617161[/snapback]

Make it happen. smile.gif


I will as soon as I can make up my friken mind on which fricken head! (insert smilely head smashing his head on brickwall here! rolleyes.gif )


--------------------
IPB Image

CLOSED on 25 acres!

-shop coming soon....
post Nov 28, 2007 - 2:09 PM
+Quote Post
OOBE

Enthusiast
*****
Joined Aug 30, '02
From San Juan, PR
Currently Offline

Reputation: 4 (100%)




If you're in that big dilema, just use the FE head and call it a day. It's not a bolt-on job on the GE head, plus chances are you won't make big power with either one. You don't turbocharge something and everything is fine and dandy and away you go boosting. smile.gif


--------------------
Past - 7A-FTE: Will never forget you
Present - 3rd Gen 3S-GTE: Swap in progress
QUOTE (SinisterSinner @ Dec 19, 2009 - 10:52 AM) *
I dont want to even think of turbos, they blow up way too often...
post Nov 30, 2007 - 9:30 AM
+Quote Post
frosty



Enthusiast
***
Joined Sep 1, '04
From Alabama
Currently Offline

Reputation: 0 (0%)




QUOTE(OOBE @ Nov 28, 2007 - 7:09 PM) [snapback]617787[/snapback]

If you're in that big dilema, just use the FE head and call it a day. It's not a bolt-on job on the GE head, plus chances are you won't make big power with either one. You don't turbocharge something and everything is fine and dandy and away you go boosting. smile.gif


God, you still don't get it. I understand what it takes to bolt on the bloody ge head and how to turbocharge a F*****G motor! I can handle both. And what do you mean that I can't make big power with either head!? The fe is proven 500 hp and the ge is proven 700+hp!! Do you think I'm going to leave the heads stock and try to get power like that!? What a joke!

Alright, I vented.

For hp goals I'm looking for either head will do (not in stock form though). Since I will be taking the 5s-fe block apart for this build, I could do the work of adding the ge head then. (repating my first post now)

The ge head already has a higher redline than the fe, but since I already plan on new parts for either head, the fe head redline could be raised then. My biggest desire with this is torque. So lets add this to the disscusion.

"Which head do you think (with some sort of proof) will be better for torque?" Since the bottom end can't make it's torque without the head assisting it.



--------------------
IPB Image

CLOSED on 25 acres!

-shop coming soon....
post Nov 30, 2007 - 12:50 PM
+Quote Post
lagos



Enthusiast
*****
Joined Aug 31, '02
From Philadelphia, PA
Currently Offline

Reputation: 8 (100%)




Either combination of heads/blocks will make good torque. Your choice should depend on your power goal and budget. Simple as that.


--------------------
15PSI - 30MPG - Megasquirt Tuned
post Nov 30, 2007 - 4:08 PM
+Quote Post
OOBE

Enthusiast
*****
Joined Aug 30, '02
From San Juan, PR
Currently Offline

Reputation: 4 (100%)




QUOTE(frosty @ Nov 30, 2007 - 8:30 AM) [snapback]618470[/snapback]

QUOTE(OOBE @ Nov 28, 2007 - 7:09 PM) [snapback]617787[/snapback]

If you're in that big dilema, just use the FE head and call it a day. It's not a bolt-on job on the GE head, plus chances are you won't make big power with either one. You don't turbocharge something and everything is fine and dandy and away you go boosting. smile.gif


God, you still don't get it. I understand what it takes to bolt on the bloody ge head and how to turbocharge a F*****G motor! I can handle both. And what do you mean that I can't make big power with either head!? The fe is proven 500 hp and the ge is proven 700+hp!! Do you think I'm going to leave the heads stock and try to get power like that!? What a joke!

Alright, I vented.

For hp goals I'm looking for either head will do (not in stock form though). Since I will be taking the 5s-fe block apart for this build, I could do the work of adding the ge head then. (repating my first post now)

The ge head already has a higher redline than the fe, but since I already plan on new parts for either head, the fe head redline could be raised then. My biggest desire with this is torque. So lets add this to the disscusion.

"Which head do you think (with some sort of proof) will be better for torque?" Since the bottom end can't make it's torque without the head assisting it.


No need to get your panties in a bunch, buddy. Do your thing. wink.gif


--------------------
Past - 7A-FTE: Will never forget you
Present - 3rd Gen 3S-GTE: Swap in progress
QUOTE (SinisterSinner @ Dec 19, 2009 - 10:52 AM) *
I dont want to even think of turbos, they blow up way too often...
post Nov 30, 2007 - 4:45 PM
+Quote Post
Supersprynt



Enthusiast
*****
Joined Feb 10, '03
From Connecticut
Currently Offline

Reputation: 11 (100%)




Oobe, you just don't get it, GOD!

IPB Image


--------------------
post Nov 30, 2007 - 6:33 PM
+Quote Post
frosty



Enthusiast
***
Joined Sep 1, '04
From Alabama
Currently Offline

Reputation: 0 (0%)




QUOTE(lagos @ Nov 30, 2007 - 5:50 PM) [snapback]618508[/snapback]

Either combination of heads/blocks will make good torque. Your choice should depend on your power goal and budget. Simple as that.


Well, here goes the flip of the coin!

QUOTE(OOBE @ Nov 30, 2007 - 9:08 PM) [snapback]618583[/snapback]

No need to get your panties in a bunch, buddy. Do your thing. wink.gif


I know rolleyes.gif

QUOTE(Supersprynt @ Nov 30, 2007 - 9:45 PM) [snapback]618591[/snapback]

Oobe, you just don't get it, GOD!

IPB Image

laugh.gif laugh.gif

Now if I was wearing moon boots...



--------------------
IPB Image

CLOSED on 25 acres!

-shop coming soon....

Reply to this topicStart new topic
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:

 



Lo-Fi Version Time is now: December 4th, 2024 - 10:57 PM