Trunk Hatch, Can't get my trunk to release |
Trunk Hatch, Can't get my trunk to release |
Apr 21, 2008 - 10:19 PM |
|
Enthusiast Joined Apr 6, '08 From Overland Park Currently Offline Reputation: 9 (100%) |
So the other day I went to pop my hatch and the trunk wouldn't open. I pull the trunk release and it's like it's already release but the trunk doesn't open and it doesn't release.. I tried the key in the back and same story.. I don't have a clue on how to get my trunk open or how to get this fixed.. Any ideas would be much appreciated...
I can pull the release and I can hear the cord moving all the way to the back but it just won't release.. -------------------- |
Apr 23, 2008 - 12:29 PM |
|
Enthusiast Joined Jan 20, '08 From New York Currently Offline Reputation: 1 (100%) |
did you try opening the trunk with the key? Hold the key all the way and pull open the trunk. This happens on my celica.
also try this thread http://www.6gc.net/forums/index.php?showto...52&hl=lever |
Apr 23, 2008 - 5:41 PM |
|
Enthusiast Joined Apr 6, '08 From Overland Park Currently Offline Reputation: 9 (100%) |
I've tried the key I've tried everything I can think of. . The key doesn't do anything. It will turn and the cord will move but its like it won't actually release. Idk if its jammed or what. Its not that it doesn't pop up, it doesn't ever let loose. It doesn't release the part that holds it. There is no resistance when I turn the key or pull the release. It's like it's just slipping or not even grasping to release whatever holds it down.
This post has been edited by bseaman_5: Apr 23, 2008 - 5:52 PM -------------------- |
Apr 23, 2008 - 6:24 PM |
|
Enthusiast Joined Mar 22, '07 From Murphy, TX Currently Offline Reputation: 5 (100%) |
you have to go inside of the car and pull down the back seats - crawl to the trunk and release the cable/latch manually -- the mechanism popped out of place -- you might have to remove the plastic covering of the back to do this - this happened to me a few times and thats what i had to do -
|
Apr 23, 2008 - 10:45 PM |
|
Enthusiast Joined Apr 6, '08 From Overland Park Currently Offline Reputation: 9 (100%) |
QUOTE(2bcelica @ Apr 23, 2008 - 6:24 PM) [snapback]667473[/snapback] you have to go inside of the car and pull down the back seats - crawl to the trunk and release the cable/latch manually -- the mechanism popped out of place -- you might have to remove the plastic covering of the back to do this - this happened to me a few times and thats what i had to do - ok, how do I release it manually?? I can't figure it out. I tried messing with it with a flat head but was very unefective that way.. and I'm not sure how to remove the plastic when its stuck shut.. not a whole lot of room to move that stuff around.. -------------------- |
Apr 24, 2008 - 2:44 AM |
|
Enthusiast Joined Apr 11, '08 From clearwater Currently Offline Reputation: 0 (0%) |
sounds like the cable came unattached as mentioned....removal of rear plastic may be in order...remove all the plugs holding it and lift up...
|
Apr 24, 2008 - 8:38 AM |
|
Enthusiast Joined Apr 6, '08 From Overland Park Currently Offline Reputation: 9 (100%) |
Easy fix. . Ha. Thanks for the help!
-------------------- |
Lo-Fi Version | Time is now: November 29th, 2024 - 8:48 AM |