GT-FOUR owners, I need your help Options

[Keijukainen]

hi, everyone!

I've got an APEX'i AVC-R boost controller. Would you be so kind as to share your adjustments/figures with me if anyone got the same device? I'm interested in duty figures most

thanx in advance

[Insanity-74]

1.1 bar at 57% duty
1.3 bar at 63% duty

But these are the settings I used to use....all of them if its any help

Setting [A] 0.9 Bar

Boost /Duty Cycle

Bst = 0.90kg/cm2

Duty = 52%

NE Point

NE1 = 3000
NE2 = 3500
NE3 = 4000
NE4 = 4500
NE5 = 5000
NE6 = 5500
NE7 = 6000
NE8 = 6500

F/B Speed

1S = 5
2N = 5
3R = 5
4T = 5
5T = 5

Learn Gear

1S = x
2N = x
3R = x
4T = x
5T = x

Start Duty

Set to 0% in all


Setting [B] 1.1 Bar

Boost /Duty Cycle

Bst = 1.10kg/cm2

Duty = 60%

NE Point

NE1 = 3000
NE2 = 3500
NE3 = 4000
NE4 = 4500
NE5 = 5000
NE6 = 5500
NE7 = 6000
NE8 = 6500

F/B Speed

1S = 5
2N = 5
3R = 5
4T = 5
5T = 5

Learn Gear

1S = x
2N = x
3R = x
4T = x
5T = x

Start Duty

Set to 0% in all

Etc settings

Car Select

Cyl = 4

Spd = 5

Throttle = / (arrow pointing up to the right)

Sensor Select

Number one (1)

Gear Jdge

1st = 120
2nd = 075
3rd = 050
4th = 035
5th = 025
N/S = 255

Graph Scale

BS = 2.0kg/cm2

Ne = 8000 RPM

Sp = 300km/h

Monitor

2 Channel

1 Bst
2 Rev

This post has been edited by Insanity-74: Jun 23, 2008 - 3:48 PM

[Keijukainen]

many thanx