6G Celicas Forums

Welcome Guest ( Log In | Register )

> WTB: Retainer clips
post Jul 9, 2008 - 3:32 PM
+Quote Post
Slick



Enthusiast
***
Joined Jan 10, '06
From Mozambique, Africa
Currently Offline

Reputation: 8 (100%)




The last time my car was in the shop for bodywork it was to intall the wire mesh on my front bumper. Well, what I didn't realize until yesterday was that during the process, they lost my retainer clips for my headlights. So they glued the retainers on! This was all fine for awhile because i didn't even notice....until the glue wore off! Now they're almost falling off.

Anyway, if you don't know what i'm talking about here's a picture. Its the small aluminum piece that holds the rubber retainer to the assembly. I contacted 1sttoyotaparts and although they have the part listed, there's no price listed. So i sent them an email and they told me, get this, that I had to buy the whole headlamp assembly to get them clips. These things are small aluminum POS that are worth 2 cents!

Does anyone know where i can get them? Thanks.



--------------------
IPB Image

"Remember, amateurs built the ark and professionals built the Titanic. But revolutionaries built the Celica!"- Me
 
Start new topic
Replies (1 - 6)
post Jul 9, 2008 - 3:51 PM
+Quote Post
ETNRIDER



Enthusiast
***
Joined Feb 10, '06
From Knoxville, TN
Currently Offline

Reputation: 8 (100%)




Are these the same small clips that hold the headlight down tight? I think I have a few extra if that is what they are. I know the parts that I am talking about are on the high beams too so I am not sure if these are the right parts.

The little clip in the top right corner of the light. Is that what you need?




How many do you need?

This post has been edited by ETNRIDER: Jul 9, 2008 - 3:54 PM


--------------------
post Jul 9, 2008 - 5:55 PM
+Quote Post
azian_advanced



Enthusiast
*****
Joined Apr 18, '05
From Calgary
Currently Offline

Reputation: 20 (100%)




there's only one clip that holds the rubber seal to the headlamp at the top center, the rest of the clips just clamp the headlamp glass to the housing...
you don't really need them unless your headlamp glass is gonna come off... and you can use glue (which works better than those damn clips) to secure the rubber seal around the headlamp.

and i checked but they're right, these clips aren't available separately...


--------------------
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
post Jul 10, 2008 - 4:15 AM
+Quote Post
Slick



Enthusiast
***
Joined Jan 10, '06
From Mozambique, Africa
Currently Offline

Reputation: 8 (100%)




QUOTE (ETNRIDER @ Jul 9, 2008 - 10:51 PM) *
Are these the same small clips that hold the headlight down tight? I think I have a few extra if that is what they are. I know the parts that I am talking about are on the high beams too so I am not sure if these are the right parts.

The little clip in the top right corner of the light. Is that what you need?




How many do you need?


Yes! Its the 2 aluminum pieces on top that i need. if you have 4 to spare it would be much appreciated! Thanks!


--------------------
IPB Image

"Remember, amateurs built the ark and professionals built the Titanic. But revolutionaries built the Celica!"- Me
post Jul 10, 2008 - 6:49 AM
+Quote Post
ETNRIDER



Enthusiast
***
Joined Feb 10, '06
From Knoxville, TN
Currently Offline

Reputation: 8 (100%)




Pmed you! I will send them out to you tomorrow!


--------------------
post Jul 31, 2008 - 3:15 AM
+Quote Post
Slick



Enthusiast
***
Joined Jan 10, '06
From Mozambique, Africa
Currently Offline

Reputation: 8 (100%)




QUOTE (ETNRIDER @ Jul 10, 2008 - 1:49 PM) *
Pmed you! I will send them out to you tomorrow!


Chris, your a scholar and a gentleman! I recieved them yesterday! Thanks alot! I owe you!

Mods, please close. Completed.


--------------------
IPB Image

"Remember, amateurs built the ark and professionals built the Titanic. But revolutionaries built the Celica!"- Me
post Jul 31, 2008 - 6:47 AM
+Quote Post
ETNRIDER



Enthusiast
***
Joined Feb 10, '06
From Knoxville, TN
Currently Offline

Reputation: 8 (100%)




Not a problem at all!! Glad I could help. thumbsup.gif


--------------------

Reply to this topicStart new topic
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:

 



Lo-Fi Version Time is now: November 26th, 2024 - 10:20 PM