 E153 Gearbox into a ST202 |
 Oct 30, 2008 - 3:01 PM
|
 
|
|
Enthusiast  Joined Sep 11, '08 From Surrey Unitedkingdom Currently Offline Reputation: 1 (100%)  |
Hi, I have fitted a 3SGTE engine into my ST202 droptop. Also fitted is a E153 gearbox. This conversion has been done before, but I can't find the thread. I want to know what drive shafts were used as the GT drive shafts will not fit into the E153 box. Do I use ST205, ST185, ST165 shafts?
This post has been edited by jeffrosie: Oct 30, 2008 - 3:01 PM |
 |
Replies
(1 - 1)
|
Oct 30, 2008 - 8:43 PM
|
|
 Enthusiast Joined Mar 8, '04 From Newport, RI Currently Offline Reputation: 63 (99%) |
http://www.6gc.net/forums/index.php?showtopic=32626
good luck reading all that  basically, 91-93 MR2 turbo (non-lsd) inners and 90-93 all-trac outers. The general agreement is that you will need about a 12mm spacer on the passenger side, and most don't need a spacer on the driver's side. I used a 12mm spacer for both sides with my st205 e153 swap and no problems. -------------------- |
 |
2 User(s) are reading this topic (2 Guests and 0 Anonymous Users)
0 Members:
| Lo-Fi Version | Time is now: January 10th, 2025 - 5:24 PM |