Honda Turbo Manifold Options

[Shocker]

Its been some time since ive visited the forums last so when i used the search engine i didnt even know where to begin.

I know that there is some honda turo maniflod that can be used on the 7afe by swapping out the plate that butts up to the engine. I believe it was TRD94 that did this awhile back.
Can anyone give me anymore info on this?

[trd94]

Its been some time since ive visited the forums last so when i used the search engine i didnt even know where to begin.

I know that there is some honda turo maniflod that can be used on the 7afe by swapping out the plate that butts up to the engine. I believe it was TRD94 that did this awhile back.
Can anyone give me anymore info on this?

yes you can , all you need is a d15 or d16 turbo manifold, a 7afe exhaust flange, and a welder . cut the exhaust flange off the d15 manifold with a ban saw line the 7a manifold up , tack weld it and test for fitment, then weld it up. i also addeda little more support to the manifold to help with the turbo weight. when you weld it becareful not to heat it up a lot as it is very easy to warp. i made my flanges for the 7a out of 3/8 steel to help prevent the warp trouble. if you want i can make one for you just pm me

[casper]

I sell U this one for 150.00 shipped