GB:CF TRD Hatch Spoiler, 3rd Batch need 10pcs for min order, Only for hatch! Options

[vincent_doggy]

Cost gonna be the same as the Coupe/Curren's one, put you name down and get ready for your payment.













Regarding the TRD STYLE SPOILER for Coupe/VERT/CURREN...
Shipping cost would be on top from Hong Kong to where u located
OZ, Hawaii ----> USD$75
NZ, USA, CANADA ----> USD$80
EUROPE, UK, GERMANY ---->USD$90
ANY OTHER LOCATION PLS ASK

TRD Style Curren Spoiler - [Note - No angle adjust for this Spoiler]

A) Whole FiberGlass = USD$175


B) Carbon blade + Carbon Caps + Fibreglass Legs = USD$250



C) Full/Whole Carbon = Carbon Blade + Carbon Caps + Carbon Legs = USD$350


D) Carbon blade + Carbon Caps = USD$200

The color of the Carbon/Kevlar blade and end cap could be chose
Any question, pls feel free to ask.




The above pics just steal from data base

This post has been edited by vincent_doggy: Sep 15, 2011 - 10:58 PM

[TiGZ461]

Too bad I don't have a TRD spoiler but anyway I'm down for the buy

1. TiGZ461

[95CelicaST]

Wish I still had the yelli Celi. I'd send off my spoiler today

This post has been edited by 95CelicaST: Sep 23, 2009 - 2:06 PM

[delusionz]

Will the bolts line up to 3 post or 2 post?

[razor7]

Will the bolts line up to 3 post or 2 post?

No,
The bolt pattern is different between the two. For any car that didn't come with the TRD wing initially, you'll have to re-drill holes into your trunk.

-TC

[whatthe]

Will the bolts line up to 3 post or 2 post?

No,
The bolt pattern is different between the two. For any car that didn't come with the TRD wing initially, you'll have to re-drill holes into your trunk.

-TC

Not from what i recall, from p2s post he said that the 2post holes are the same for a trd wing.
I dont have a trd wing but i want one.

1. TiGZ461
2. whatthe

[chacha]

i have sent you a pm....i have the middle part and would gladly help to accept with the offer granted to me...thanks... will you make the side covers in CF too to match up with the middle part being carbon fiber?

[vincent_doggy]

i have sent you a pm....i have the middle part and would gladly help to accept with the offer granted to me...thanks... will you make the side covers in CF too to match up with the middle part being carbon fiber?

I need the whole thing mate, if you have 3 pcs that without the side cover, then I need to see if any other member that could donate the cover for this project.

Anyone?

[chacha]

someone...help donate the covers....on the side note vince, LewFX did make some side covers, but they are not the OEM ones...they are some sheet metal he cut to try and match up to the side covers of the spoiler...I will try to take pics and see what you think. ill have it up by today in 7-8 hours

[presure2]

vin, lemme talk to the wife when i get home from work.

[vincent_doggy]

vin, lemme talk to the wife when i get home from work.

Manny, u mean u gonna help to send the side cover or the whole spoiler?

[presure2]

vin, lemme talk to the wife when i get home from work.

Manny, u mean u gonna help to send the side cover or the whole spoiler?

if anything, i will send the whole spoiler.
its up to jenn, it has to come off of her car.

[chacha]

if presure2 can help...i would like to be put down for the the middle piece and the side covers with new bolts and nuts

This post has been edited by chacha: Sep 24, 2009 - 5:23 AM

[02bluerolla]

What about for the coupe? Cause i got a trd spoiler that you can borrow , but its for the coupe. lmk

[vincent_doggy]

What about for the coupe? Cause i got a trd spoiler that you can borrow , but its for the coupe. lmk

U got pics? I think that is for Curren, is it similar set up like the one for hatch?

[95CelicaST]

The coupe and hatch end pieces are different, or else there wouldn't be any need for coupe/curren and hatchback specific spoilers. The middle pieces might be the same, but I'm not sure. I would assume they're not.

This post has been edited by 95CelicaST: Sep 24, 2009 - 10:34 AM

[vincent_doggy]

Yea, I know they are different
I think the following is the TRD Curren Wing, correct me if I am wrong

[95CelicaST]

Yes, that is the TRD wing for the coupe/convertible/curren

[SwissFerdi]

I'll gladly donate my 3-post. Let me know when that comes around.

[vincent_doggy]

I'll gladly donate my 3-post. Let me know when that comes around.

lol, 1 day...

[SwissFerdi]

I'm serious. I know there might not be much interest for it, but consider this my dibs post if it ever does happen.

[vincent_doggy]

I'm serious. I know there might not be much interest for it, but consider this my dibs post if it ever does happen.

Oh ok, but need to gain enough interest before proceed, at least could cover the mould fees, hope u understand

[SwissFerdi]

Oh ok, but need to gain enough interest before proceed, at least could cover the mould fees, hope u understand

I'm guessing I'd have to pay for the mould because there would be less interest?

[vincent_doggy]

Oh ok, but need to gain enough interest before proceed, at least could cover the mould fees, hope u understand

I'm guessing I'd have to pay for the mould because there would be less interest?

I have mutual agreement with the supplier/factory, which make FG/CF stuffs for me
They will free the mould fees if I order 10+
If not I still need to pay for the mould fees.

[SwissFerdi]

I have mutual agreement with the supplier/factory, which make FG/CF stuffs for me
They will free the mould fees if I order 10+
If not I still need to pay for the mould fees.

Okay, that works. If I do it, I'll try to rally 10 other people...shouldn't be too hard. How much would return shipping be, do you think? And how much is the mold fee, if anything?

[vincent_doggy]

I have mutual agreement with the supplier/factory, which make FG/CF stuffs for me
They will free the mould fees if I order 10+
If not I still need to pay for the mould fees.

Okay, that works. If I do it, I'll try to rally 10 other people...shouldn't be too hard. How much would return shipping be, do you think? And how much is the mold fee, if anything?

U mean regular 3 post?
and make it CF/Kevlar right?
I might have one in my friends garage.
Have to send to the factory to ask for a quote.
Shipping won't be horrible anyways, u can quote at www.hongkongpost.com
U can start a new thread to see if any members willing to join your boat, sure that could make it happen more soon.

[SwissFerdi]

Yep, regular 3-post. I'm not sure if I'd want just the spoiler wrapped or the posts as well...but take your time man, I have to look into my funds anyway after I get a quote and I don't want you to think you have a sale when you don't.

I will for sure make a thread then, though.

[95st-celica]

put me down for a TRD if you get mannys wing, i would want the center C/F along with the end covers in C/F as well...the posts can be left bare as i will need to paint them the same color as my car....its about time someone did this!! good job vince im excited....may be to early to tell but ANY idea on a price for a whole wing?

[presure2]

ok vincent.
the wifey says we can do this.
sending PM now.

[02bluerolla]

What about for the coupe? Cause i got a trd spoiler that you can borrow , but its for the coupe. lmk

U got pics? I think that is for Curren, is it similar set up like the one for hatch?

here you go .

[vincent_doggy]

Trd Wing for Hatch

1. TiGZ461
2. whatthe
3. Chacha - CF Center piece and side cover
4. 95st-celica

This post has been edited by vincent_doggy: Sep 24, 2009 - 8:05 PM

[chacha]

Trd Wing for Hatch

1. TiGZ461
2. whatthe
3. Chacha - whole TRD wing (all CFs) + 1 extra Center piece CF and 1 pair side cover in CF with all the nuts and bolts with it
4. 95st-celica

This post has been edited by chacha: Sep 24, 2009 - 8:48 PM

[NGHTKD]

Trd Wing for Hatch

1. TiGZ461
2. whatthe
3. Chacha - whole TRD wing (all CFs) + 1 extra Center piece CF and 1 pair side cover in CF with all the nuts and bolts with it
4. 95st-celica

Just a q...

So are you only making CF centre pieces and CF Spoiler, or can make F/G side pieces with CF centre piece???

Either way, I'm off the Eurou project and on this one:

1. TiGZ461
2. whatthe
3. Chacha - whole TRD wing (all CFs) + 1 extra Center piece CF and 1 pair side cover in CF with all the nuts and bolts with it
4. 95st-celica
5. NGHTKD

BTW - a thanks to Presure and his Mrs!!!

This post has been edited by NGHTKD: Sep 24, 2009 - 9:17 PM

[TiGZ461]

BTW I want make a change



1. TiGZ461-CF center piece and CF covers
2. whatthe
3. Chacha - whole TRD wing (all CFs) + 1 extra Center piece CF and 1 pair side cover in CF with all the nuts and bolts with it biggrin.gif
4. 95st-celica
5. NGHTKD

[crwarrior]

hey VIN!

ill lend you my spoiler if its fine with you??

no cracks so you shouldent really have much of a problem...i can take more pictures if you want AND also...my TRD wing is for coupe as well not hatch

http://i198.photobucket.com/albums/aa201/h...tspaul/0045.jpg

let me know

[2bcelica]

1. TiGZ461-CF center piece and CF covers
2. whatthe
3. Chacha - whole TRD wing (all CFs) + 1 extra Center piece CF and 1 pair side cover in CF with all the nuts and bolts with it biggrin.gif
4. 95st-celica
5. NGHTKD
6. 2bcelica

[Slick]

I am SO in!! Will the sides be FG or CF? Either way, I want them. I'll just have to paint the sides anyway.

1. TiGZ461-CF center piece and CF covers
2. whatthe
3. Chacha - whole TRD wing (all CFs) + 1 extra Center piece CF and 1 pair side cover in CF with all the nuts and bolts with it biggrin.gif
4. 95st-celica
5. NGHTKD
6. 2bcelica
7. Slick - CF center piece and CF covers

[808celica]

anyone know the length of the center piece???

[diegohiga]

I'm down for one too!!! I want the whole spoiler in CF but I want it black for my hatch!! Let me know when you are ready to ship it!!

[delusionz]

Yep, regular 3-post. I'm not sure if I'd want just the spoiler wrapped or the posts as well...but take your time man, I have to look into my funds anyway after I get a quote and I don't want you to think you have a sale when you don't.

I will for sure make a thread then, though.

3post without the middle post

[SwissFerdi]

3post without the middle post

My man! I was thinking that too, I guess I'll consider you #2?

[NWCelica]

I'm in for one .....

[NGHTKD]

I really hope this GB goes ahead, come on people!

1. TiGZ461-CF center piece and CF covers
2. whatthe
3. Chacha - whole TRD wing (all CFs) + 1 extra Center piece CF and 1 pair side cover in CF with all the nuts and bolts with it biggrin.gif
4. 95st-celica
5. NGHTKD (50/50 depending on final price)
6. 2bcelica
7. Slick - CF center piece and CF covers
8. diegohiga
9. NWCelica

This post has been edited by NGHTKD: Sep 28, 2009 - 10:28 AM

[TiGZ461]

Looks like I'm have to back out of this one, I have other things to take care of right now.

1. whatthe
2. Chacha - whole TRD wing (all CFs) + 1 extra Center piece CF and 1 pair side cover in CF with all the nuts and bolts with it biggrin.gif
3. 95st-celica
4. NGHTKD
5. 2bcelica
6. Slick - CF center piece and CF covers
7. diegohiga
8. NWCelica

Depending on the release date, I might have to wait on the second bash. But if its gonna take at least a couple months to make then I guess I'm still in.

[st3v3o]

Yea, I know they are different
I think the following is the TRD Curren Wing, correct me if I am wrong

If this is the wing you need... i actually got this car now.... hit me up... and see if you still need it...

[808celica]

Yea, I know they are different
I think the following is the TRD Curren Wing, correct me if I am wrong

If this is the wing you need... i actually got this car now.... hit me up... and see if you still need it...

wanna measure the center piece length for me???

[presure2]

the wing is off the car, just need to dissasemble it and get a shipping quote for vin.

vincent, when you have these made, are the mounting locations going to have metal threaded inserts?
that is my only concern in having these made, is how they mount to the car. im not a fan of screwing directly into fiberglass and asking it to hold. lol
ill take a couple pics of how mine are for refrence tonight.

[OOBE]

^ GREAT point!

[presure2]

808: the center section on my wing is roughly 43 3/16", but its not straight. its actually a compound curve.
ok here are a few pics of what i am talking about.
its a little hard to tell, but in these pics, the threaded section you see is actually a metal insert that the fiberglass post is made around.
that way, it mounts and holds much like OEM.

(ignore the ghetto gasket..lol)







vin, also another thing the wifey just mentioned actually. the TRD wing center section is normally adjustable into 3 diffrent positions, this copy i have from chrisc is also adjustable, i assume your guys will be able to replicate it without an issue, correct?
the center adjusts by changing the "washer" that goes thru the post into the center section.
here are a couple pics of that:





by flipping those washers into diffrent positions, you can adjust the angle of the wing into the 3 diffrent positions.

a couple of the whole wing for refrence:




man, she looks naked without that wing!

[samir0189]

^^ naked, but sleek!!! Not bad!

[SwissFerdi]

How are you plugging the holes?

[vincent_doggy]

Manny, the supplier have skills, as they did the varis roof spoiler awhile ago, similar set up with stainless, so would be alright!!

This post has been edited by vincent_doggy: Sep 28, 2009 - 6:10 PM

[presure2]

How are you plugging the holes?

i just covered them with some clear tape. i definetly wouldnt seal the holes, at least not on jenns car, with the extensions+ gt4 front, ect it just looks like its missing somthing.

vin, awesome.
ill be in contact a little later in the week with a shipping quote.
any idea how long it will take for them to produce a finished product for you?

[SwissFerdi]

Okay, as long as it holds. I used nylon plugs and silicone beforehand.

[taras_GT]

Hey Vince, what's the total shipped price to the UK?

1. whatthe
2. Chacha - whole TRD wing (all CFs) + 1 extra Center piece CF and 1 pair side cover in CF with all the nuts and bolts with it biggrin.gif
3. 95st-celica
4. NGHTKD
5. 2bcelica
6. Slick - CF center piece and CF covers
7. diegohiga
8. NWCelica
9. Taras_GT (depending on price)

[lilgreenyoda]

Yea, I know they are different
I think the following is the TRD Curren Wing, correct me if I am wrong

If this is the wing you need... i actually got this car now.... hit me up... and see if you still need it...

Would you be able to do something similar to that pic with half the rise? Not a tall spoiler kind of guy. But something like that, just half as high would be sick if it's possible. IF you can do that, you can add me to that list

1. whatthe
2. Chacha - whole TRD wing (all CFs) + 1 extra Center piece CF and 1 pair side cover in CF with all the nuts and bolts with it biggrin.gif
3. 95st-celica
4. NGHTKD
5. 2bcelica
6. Slick - CF center piece and CF covers
7. diegohiga
8. NWCelica
9. Taras_GT (depending on price)
10. yoda***

[NGHTKD]

1. whatthe
2. Chacha - whole TRD wing (all CFs) + 1 extra Center piece CF and 1 pair side cover in CF with all the nuts and bolts with it biggrin.gif
3. 95st-celica
4. 2bcelica
5. Slick - CF center piece and CF covers
6. diegohiga
7. NWCelica
8. Taras_GT (depending on price)
9. yoda***


This post has been edited by NGHTKD: Oct 10, 2009 - 9:19 AM

[st3v3o]

Yea, I know they are different
I think the following is the TRD Curren Wing, correct me if I am wrong

If this is the wing you need... i actually got this car now.... hit me up... and see if you still need it...

Would you be able to do something similar to that pic with half the rise? Not a tall spoiler kind of guy. But something like that, just half as high would be sick if it's possible. IF you can do that, you can add me to that list

1. whatthe
2. Chacha - whole TRD wing (all CFs) + 1 extra Center piece CF and 1 pair side cover in CF with all the nuts and bolts with it biggrin.gif
3. 95st-celica
4. NGHTKD
5. 2bcelica
6. Slick - CF center piece and CF covers
7. diegohiga
8. NWCelica
9. Taras_GT (depending on price)
10. yoda***

Honestly the pic makes it look bigger than what it is.... i kinda grew into it already... i never really liked wings up until i got this car... i just don't like that it's right on my view to see rear traffic.... but it looks good... not THAT high but would be better a bit shorter

[richee3]

I may be interested, depending on the price.

[Stambo]

Once final price is figured out, i'd be down for the curren wing/coupe trd wing

[SwissFerdi]

I may be interested, depending on the price.

No Richee. You will join me in wanting a CF 3-post. It's meant to be.

[HerosBlade]

I was wondering is the trd wing would sold as a whole set sides and center or in pieces??? Vince can u give us a round about price with shipping so I know how much to save.

[vincent_doggy]

Hey, Manny, u got the shipping quote yet?

[Slick]

Bump!

[vincent_doggy]

Paypal ready... have quote yet?

[pittfirefighter]

i asked vince about this forever ago when he first started this little adventure of his.. i am definitely down for a fiberglass replica with CF insert in the middle

[presure2]

sorry guys, kinda dropped off the earth for a while with other projects.

vince, i will have the shipping quote for you this weekend.

[crwarrior]

i dunno i still want my TRD wing for coupe to have a CF middle piece...

[img]http://i198.photobucket.com/albums/aa201/holycrapitspaul/0045.jpg[img]

so VD if u wanna have mine to make the moldes for the coupe trd wing...let me know

[crwarrior]

[Stambo]

I hope this gets going, i really want one!

[jjbenzo]

I am wanting on the list for a TRD replica carbon fiber hatchback spoiler. I have a few questions though. First, I would like the whole thing in carbon fiber (I don't care for fiberglass if I don't have to have it)....and i will then have the sides painted at the body shop to match. If I get the whole spoiler in carbon fiber, will it be easily paintable? Secondly, those that are all carbon fiber, is there any fiberglass in it for the mold, or is it truly a 100% carbon fiber spoiler? I am thinking about integrity of the spoiler. And just to be clear, the mounting holes/threads will be metal correct? What is the price for this spoiler? When will these begin production, and when may I expect mine to be finished and shipped? When and to whom do I send payment? Feel free to private message me if you wish. Thank you!

This post has been edited by jjbenzo: Nov 2, 2009 - 2:08 PM

[vincent_doggy]

Folks!!! Since RTP had been produced the TRD STYLE Spoiler for Hatch, I don't wanna clash with their products.

So, Manny, no need to send your wifey's trd spoiler to me, seems a bit too late...

However, if they sell those to 6GC member at a ridiculous SKY price, then I might jump in to BALANCE the price later on, hopefully I don't need to do such...

Regarding the TRD STYLE SPOILER for Coupe/VERT/CURREN...

Once I have the mould, I will test fit, post up price and everything...

But now, Pls put your name down and your request, I will make this happen ASAP... thx!

This post has been edited by vincent_doggy: Nov 6, 2009 - 10:23 PM

[captb]

Definitely interested in a TRD spoiler for coupe. Could you give a ballpark range of the cost?

[vincent_doggy]

Definitely interested in a TRD spoiler for coupe. Could you give a ballpark range of the cost?

What I can say is within BUDGET... the supplier need the real wing for exact quote!

[MaskedMan]

My offer to send in my wing still stands Vincent. My wing is already off my car and ready to go if needed.

[vincent_doggy]

My offer to send in my wing still stands Vincent. My wing is already off my car and ready to go if needed.

I am dealing with a member right now... if it fall.... I will come to u buddy...

As long as u agree with the following

A) The shipping cost from you to Hong Kong, would be on my cost
B) I will send you back a brand new CF TRD Spoiler of your choice, like color of the CF/Kevlar, or just the center piece in CF
C) A FOC customized Smoked Gas Lid Pack as incentive
D) The shipping cost from here to u would be on your cost, but it won't cost much, if those are in CF

PS the wing u gonna send me won't return, since the supplier need that

[vincent_doggy]

Regarding the TRD STYLE SPOILER for Coupe/VERT/CURREN...

The Mother would be here in the near future... a member would send it to me soon...

But now, Pls put your name down and your request, I will make this happen ASAP... thx!


This post has been edited by vincent_doggy: Nov 7, 2009 - 2:14 PM

[MaskedMan]

I completely agree with the requirements Vincent if the deal falls through.

Are we able to get a combination like, CF center piece, Fiberglass posts, and CF side covers?

[vincent_doggy]

I completely agree with the requirements Vincent if the deal falls through.

Are we able to get a combination like, CF center piece, Fiberglass posts, and CF side covers?

Yes, any combination

[project671]

im in...just need to know price...

[CelicaST_CALI]

haha if CR and maskedman both fall through i have one stilling in my garage i primered id send u NP.I need the side covers that cover the bolts that hold the center to the posts.how much would that be?

[crwarrior]

lol cali im not falling through i took it off and its packed but hopefully usps is open tomorrow (sunday) so i can ship it out to vince

[CelicaST_CALI]

i pray for a car crash hahahah just kidding

[vincent_doggy]

Guys, the MOTHER is on the way from Miami to Hong Kong... try to make u guys a X'mas Gifts if everything smooth

[DaCCelica94]

cnt wait till these are done. ill be pickin one up

[crwarrior]

like vince said THE MOTHER IS ON HER WAY!!! =) hopefully all turns out great and everyone can enjoy and have nice TRD wing for coupe/verts! coupes/verts need to have some love too!!!

[crwarrior]

IT HAS ARRIVED!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!....(i think) lol

[njccmd2002]

what about the rear splitters

[vincent_doggy]

what about the rear splitters

Sick_Puppy from New Zealand would send me a pair... just waiting for the shipping quote

[captb]

any updates? for this and the rear splitters?

[vincent_doggy]

Guys...

Here's the Quote I have from supplier *** Shipping cost would be on top from Hong Kong to where u located

TRD Style Curren Spoiler - [Note - No angle adjust for this Spoiler]

A) Whole FiberGlass = USD$175

B) Carbon blade + Carbon Caps + Fibreglass Legs = USD$250

C) Whole Carbon = Carbon Blade + Carbon Caps + Carbon Legs = USD$350

D) Carbon blade + Carbon Caps = USD$200

Since the amount for the spoiler is not as cheap as the previous project or product I have, so I need 50% down payment before I place each order

I am now waiting for the 1st prototype to come for test fit, then could be ordered
The color of the Carbon/Kevlar blade and end cap could be chose
Any question, pls feel free to ask.
I would send out the spoiler according to the paying sequence.

This post has been edited by vincent_doggy: Dec 3, 2009 - 12:34 PM

[CelicaST_CALI]

I need 2 end caps CF

[captb]

so if i got option B, it would cost $250 + shipping? or $250 shipped?

[vincent_doggy]

so if i got option B, it would cost $250 + shipping? or $250 shipped?

It would cost $250 + shipping

[captb]

will they be making the rear extensions at the same time so we can buy as a package deal, if so any updates on the extensions?

[vincent_doggy]

will they be making the rear extensions at the same time so we can buy as a package deal, if so any updates on the extensions?

I need to get some fund to send sick_puppy...

[presure2]

moving to b/s per vinces request.

[njccmd2002]

wow those prices are cheapo, i already have a spoiler, but ill see once im done with the engine

[presure2]

wow those prices are cheapo, i already have a spoiler, but ill see once im done with the engine

seriously.
great pricing, vince.
i SO hope you produce these for the hatch as well.

[Ted95]

i want the reg fiberglass one!
-cameron