 I had my head all cleaned up, Port, Polished, Decked, Pressure & s, Some pics inside. |
 Sep 25, 2009 - 4:55 PM
|
 
|
 Enthusiast  Joined Nov 12, '02 From Webster Ma. Currently Offline Reputation: 1 (100%)  |
I had my head all cleaned up, Port, Polished, Decked, Pressure & stress tested, and had the Combustion Chamber Domes Polished.
All the work was done by my friend, He does great work. It should add more than about 40+ hp, Atleast thats what we're expecting at 14.5lbs. The intake ports are perfectly matched up to the gasket & intake manifold. They are nice and rough to keep fuel from sticking to the sides. The casting marks are all gone which makes the air flow smoother. The head was decked, A nice flat surface to mate the block to. Polished combustion domes reduce the chances of having a hot spot, which leads to detonation. The exhaust ports were only slightly ported to keep exhaust velocity high, and they are mirror polished. Oh, the valves we lapped in also.  Decked & polished combustion domes ^  Intake port ^  Perfectly gasket matched ^  Exhaust port ^ -------------------- |
 |
Replies
(1 - 6)
|
Sep 25, 2009 - 5:23 PM
|
|
 Enthusiast Joined Feb 5, '05 From pineapple under the sea Currently Offline Reputation: 9 (100%) |
Sex.
-------------------- 1991 MR2 - T-tops - Crimson Red - Gen3 3SGTE - Lots of money
 I'm not really an asshole, but I play one on the internet. **** Photobucket |
|
Sep 25, 2009 - 6:40 PM
|
|
 Enthusiast Joined Feb 7, '07 From Portland, Oregon Currently Offline Reputation: 67 (96%) |
What, if any, kind of gains would this produce for a n/a motor? I've got an extra intake and exhaust manifold I've had some plans for, but was hesitant if there wouldn't really be any gains. Do you lose any top end power by polishing the intake manifold? I read somewhere that you do, but I don't think it specifically pertained to a Celica. Having an n/a 7A, naturally I need all the top end power I've got, it's not like I have any to spare
--------------------  |
|
Sep 26, 2009 - 4:21 PM
|
|
|
Enthusiast Joined Nov 12, '02 From Webster Ma. Currently Offline Reputation: 1 (100%) |
You would get gains on any engine. removing the casting marks is the best thing to do, increases air flow, reduces turbulence, increases velocity.
more down low and uptop power. on an NA you just wouldn't benefit as much has a turbo car. -------------------- |
|
Sep 26, 2009 - 6:53 PM
|
|
 Moderator Joined Oct 1, '02 From fall river, ma Currently Offline Reputation: 13 (100%) |
good stuff john.
cant wait to see it all back together! -------------------- Former Team 5SFTE pro member ;)
 13.6@108MPH, 5SFTE Powered |
|
Sep 27, 2009 - 3:27 AM
|
|
 Enthusiast Joined Dec 15, '02 From Tasmania(Australia) Currently Offline Reputation: 0 (0%) |
im assuming you also ported out the inlet mani slightly because the gaskets are always (read ALWAYS on both inlet and zaust side)) oversize by a couple of mm or so in diameter. You also want to be careful taking the inlet ports on a gen2 out much as they are too big already.
looks like quality work though -------------------- ST205 Group A Rallye GT-Four, #61 of 77............600hp GT3582r
GRX133 Toyota Mark X 350s  |
|
Sep 27, 2009 - 4:13 AM
|
|
|
Enthusiast Joined Mar 28, '08 From Washignton Currently Offline Reputation: 1 (100%) |
Sexy sexy
-Terracar -------------------- '92 ST185, '88 ST165, '05 Galant LS, '08 Legacy
|
 |
2 User(s) are reading this topic (2 Guests and 0 Anonymous Users)
0 Members:
| Lo-Fi Version | Time is now: November 25th, 2024 - 9:30 PM |