have a 94, but got a bodykit can i get clear turns?, The kit is for all 6gc's can i get '96+ clears? Options

[mgnt232]

I know my old bumper was a prelift so the clears wouldt fit right, but now that i have a VIS invader kit, could i get the clears ive always wanted?
thanks-

[yarik83]

parts are interchangeable. If you are installing headlights you will have to remove the bumper. If you are doing side marker lights and IF you have custom fenders (ie z3, laser etc)then you can put that clear marker in the hole. If you dont have a hole then you would have to obviously cut it.

[mgnt232]

Im not installing headlights? or side markers
heres a pic, i want to change the front blinkers/turn signals to clear once i put the FB of the bodykit on, can i do that?

parts are interchangeable. If you are installing headlights you will have to remove the bumper. If you are doing side marker lights and IF you have custom fenders (ie z3, laser etc)then you can put that clear marker in the hole. If you dont have a hole then you would have to obviously cut it.

[ajmorris1977]

look at mine, i had to cut the bumper a touch to mount correctly but the facelift side lights/blinkers fit great....i'll take close up pics as soon as it stops raining...

here is a pic...



This post has been edited by ajmorris1977: Jan 18, 2010 - 5:10 PM

[mgnt232]

Cool thanks, cant wait to get the clears, hate! the amber color ones, they look too stock.
Also do you know where to get like the wire mesh? that goes behind the blinkers and can it go in the front too? thanks-
my kit didnt come with it in the front, only small rear mesh pieces?
and is it expensive? thanks

[ajmorris1977]

Cool thanks, cant wait to get the clears, hate! the amber color ones, they look too stock.
Also do you know where to get like the wire mesh? that goes behind the blinkers and can it go in the front too? thanks-
my kit didnt come with it in the front, only small rear mesh pieces?
and is it expensive? thanks

mine only had mesh in the center section of the front bumper and the two small "vents" in the rear, not i went to home depot and bought mesy for the sides of the front but after i fitted the marker lights i noticed that that was really not needed as it reduces the size of the open vent, you can see it in the picture. mesh is pretty cheap it just depends how heavy (thick) you want it, i went with a light mesh so it was less noticable as it got painted and i didn't want it to notice....