amp installation Options

[stormtrupr]

just wondering....
where is the easyiest and best place to run the amp lead from battery to amp?
i looked and didnt see a easy way through the firewall.
what have you guys done??

[Supersprynt]

Where your engine harness comes thru, they're are alot of other holes too.

[van95st]

i used a uni-bit and drilled a hole behind the center dash on the passenger's side. If you do drill a hole make sure you also use a gromett and seal it up with silicone when your done. if you want pics of where i put it let me know.

[Digndoug]

Alright, I had the same problem, an didnt want to cut through the wall. There is a rubber boot on the upper left side, this just opens up to right behind the glove box. I just cut a little hole and then slide it through and then ran it down behinde my glove box then through my center console. i added 2 pics, so ask if you need too. this was just the easiest way.