 ViS Racing Invader Kit fitment problem, can't fit the bumper brace back on!WTF?! |
 Nov 11, 2003 - 10:10 PM
|
 
|
 Enthusiast  Joined Nov 27, '02 From Derry,NH USA Currently Offline Reputation: 9 (100%)  |
I just got my ViS Racing Invader kit.. I need to know how to modify the bumper brace (the aluminum bar) so that I can leave it on and put the bumper on too.. I have been riding around without it..and the handling isn't as good anymore.
PLEASE someone! Anyone! Help me! My car is getting painted saturday! e-mail me....Lucky13racing2001@yahoo.com Thanks!! -STEVE[B][FONT=Arial][SIZE=7] --------------------  |
 |
Replies
(1 - 14)
|
Nov 11, 2003 - 11:31 PM
|
|
 Enthusiast Joined Feb 10, '03 From Connecticut Currently Offline Reputation: 11 (100%) |
You gotta take it off.
It couldnt have made that much of a difference, do u have the stock brace on the strut mounts? This post has been edited by Supersprynt: Nov 11, 2003 - 11:32 PM -------------------- |
|
Nov 11, 2003 - 11:39 PM
|
|
 Enthusiast Joined Mar 23, '03 From New Orleans Currently Offline Reputation: 5 (100%) |
i want to get this, or order around christmas. How bad is the install? do I need to drill the holes, or are they predone? I'm getting the front and side skirts.
|
|
Nov 12, 2003 - 1:32 AM
|
|
 Enthusiast Joined Aug 30, '02 From Michigan Currently Offline Reputation: 0 (0%) |
that is a bumper support beam, it does nothing to the handling except cut a few pounds from the front of the car. but if you get in a crash your in deep.
--------------------  Believer, you'll leave her, in leaving them all No but I don't buy it Like anything you do, as anyone you are Cause I'm... Ten Speed, of God's Blood & Burial |
|
Dec 1, 2003 - 5:28 PM
|
|
 Enthusiast Joined Sep 5, '03 From Grapevine, TX Currently Offline Reputation: 0 (0%) |
So you HAVE to take it off in order to install the kit? Aren't there serious safety issues involved with that?
-Brian |
|
Dec 1, 2003 - 6:37 PM
|
|
||
 Enthusiast Joined Feb 22, '03 Currently Offline Reputation: 0 (0%) |
yea thats why some people dont get that kit or the combat kit. most body shops wont even install it for you since its a hazard and they dont wanna deal with the legal issues if you do get into a crash. -------------------- Note to new members. Discussions such as the ones below are forbidden.
http://www.6gc.net/forums/index.php?showtopic=26310&hl= |
||
|
Dec 1, 2003 - 8:02 PM
|
|
|
Enthusiast Joined Sep 5, '03 From Grapevine, TX Currently Offline Reputation: 0 (0%) |
Well, except for those two, are there any others that require that support beam off that I should be aware of before I go purchasing one?
-Brian |
|
Dec 1, 2003 - 10:50 PM
|
|
||
|
Enthusiast Joined Feb 22, '03 Currently Offline Reputation: 0 (0%) |
Combat, Invader, Blitz...i dont think u need to remove the support beams if u buy a real Veilside or the Varis kits but i dunno -------------------- Note to new members. Discussions such as the ones below are forbidden.
http://www.6gc.net/forums/index.php?showtopic=26310&hl= |
||
|
Dec 4, 2003 - 12:45 PM
|
|
|
Enthusiast Joined Nov 4, '02 From Davenport Iowa Currently Offline Reputation: 0 (0%) |
you can install the front bumper support with the vis invader front.. I have dont it and it took about 3 min to do.
there are two ways around this. 1: you can cut the corners of the brace at a 45degree angle. 2: you can make a small cut in the front of the kit where the driverside turn signal goes.. this is what I did and you cant notice it unless you are looking for it. I also modded my front opening to allow for my FMIC so that might of helped also but didnt really notice if it did or not. I chose this route as I had powdercoated my front bumpersupport beam prior to doing this.. If I could redo it I would probably just cut the ends at an angle but thisway works just fine also. here look - please pardon the dirt is been a while since I have needed to clean it   the small notch under the turnsignal is the cut I had to make to make this fit.. and the turnsignal itself isnt mounted properly at the moment.. it is not a result of doing this with the front support beam. here is a front shot of it also  --------------------  99 project version 3.0.. hello SEMA 2010 =) |
|
Dec 4, 2003 - 1:09 PM
|
|
 Enthusiast Joined Dec 21, '02 From Orlando Currently Offline Reputation: 0 (0%) |
What is that in your front bumper? At a glance it looks like an Apexi fmic, but then again, it doesn't look like a fmic at all.
|
|
Dec 4, 2003 - 2:51 PM
|
|
 Enthusiast Joined Nov 15, '02 From Corona & Vallejo, CA Currently Offline Reputation: 0 (0%) |
In regards to the reinforcement bar (rebar, if you will), I just wanted to share my (not so good) experience.
One day, I was at a stop light on my way to return a movie. There were three cars in front of me. The first one made a right when it was clear. The second car in line was about to make a right, BUT DIDN'T because they thought they saw another car coming... so she broke hard... the van in front of me broke hard... but I didn't... cuz I was busy looking to the left to see if there were any incoming cars. I BUMPED... not crashed... but BUMPED... the van at about 3 MPH... yes... I said 3 MPH... and guess what happened? CRUNCH! That's right folks... that's how fragile the kit is... now imagine if I hit the guy at 20+ MPH... scary stuff... The reason why I'm telling you guys this is because I want you all to be EXTRA careful once you have the kit on.... I didn't have the rebar on... and my bumper crumbled and my high beams shattered. I was just thankful that I didn't own the AUTHENTIC Veilside kit at the time... which is part of the reason why I always recommend the knockoffs... unless you're some RICH rat bastard...  Thanks for taking the time to read my story... and please know that this all really happened to me... and I'm just glad that I have a good brother who spotted me 6 bills to get the front fixed... -Ray |
|
Dec 7, 2003 - 5:07 PM
|
|
|
Enthusiast Joined Nov 27, '02 From Derry,NH USA Currently Offline Reputation: 9 (100%) |
Yeah..Well.. I finished the install....the car can been seen on www.6gc.net my SN is 97Celica... There WERE a few problems..and I had to "MODIFY" the front support brace with a dremel tool..the kit from ViS Racing does NOT come pre-drilled but DOES fit pretty damned good once you get past the small hump of the support brace. E-mail me at
lucky13racing2001@yahoo.com if anyone has any questions about the install or post a reply in the forum.Thanks... -------------------- |
|
Dec 7, 2003 - 6:48 PM
|
|
 Enthusiast Joined Oct 3, '02 From Va Team 6gc Currently Offline Reputation: 1 (100%) |
nice job. Can u put up some more shots with better size if possible, I want to see exactly how fitment is.
--------------------  All I have in this world is my Balls and my Word and I'm not breaking em for no one,- Tony Montana Team 6gc 2005 |
|
Dec 11, 2003 - 2:50 PM
|
|
|
Enthusiast Joined Aug 30, '02 From Michigan Currently Offline Reputation: 0 (0%) |
haha neverstop were gunna weed pictures from you yet!! any update on the ETA??
-------------------- Believer, you'll leave her, in leaving them all No but I don't buy it Like anything you do, as anyone you are Cause I'm... Ten Speed, of God's Blood & Burial |
|
Dec 13, 2003 - 10:50 PM
|
|
|
Enthusiast Joined Nov 27, '02 From Derry,NH USA Currently Offline Reputation: 9 (100%) |
Yeah.. I updated my profile on www.6gc.net under the SN 97Celica with a few more recent pics..check them out for fitment..the only problem I am having is with the gap on the rear bumper with about 1/8" in space that kinda looks like ****...I am having it molded though.
-------------------- |
 |
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
| Lo-Fi Version | Time is now: November 27th, 2024 - 12:44 PM |