 alltracst185's All-trac build thread |
 Jan 4, 2011 - 9:20 PM
|
 
|
|
Enthusiast  Joined Mar 1, '09 From fitchburg, ma Currently Offline Reputation: 0 (0%)  |
I just noticed i never started a build thread here...lol...so here goes!
Starting from 1/1/11 (if you want to see from start to finish check it out here http://www.alltrac.net/phpBB2/viewtopic.php?f=44&t=22608 engine built and in the car already  ENGINE 3sgte bored 20 over CP 9:0/1 pistons Eagle H beam rods & ARP bolts polished and balenced 3sgte crank ACL race bearing (rods and main) HKS GT3040 turbo (powdercaoted Purple metalic) 3" SS V-band conversion SS ramhorn ex manifold Tial 38mm ex wastegate custom SS down pipe 3" SS V-band conversion Finadanza flywheel 6 puck clutch new OEM bottom end gasket kit Powdercoated Purple metalic shaved OEM valve cover HEAD mild port and polish Engle valve springs new OEM valve seals HKS 272 cams HKS ajustable cams HKS kevlar timing belt Cometic head gasket RMR intake maini KO Racing phenolic spacer(TVIS deleted) BBK 70mm throttle body new OEM top end gasket kit new OEM water pump ATS high volume oil pump new OEM belt tensioner new OEM tensioner pulleys ARP head studs ARP flywheel bolts FUEL Speed-Source top feed fuel rail Presision 880 top feed injectors Aeromotive FPR Walboro 255 in tank fuel pump cusom SS fuel lines new OEM injector spacers & seals ELECTRONICS AEM EMS HKS turbo timer Inovative LC-1 wideband O2 Eclipse 7" double din DVD/CD Rockford Fosgate 500 RMS amp custom 12" sub enclosure (made by me) with MA Audio 12" XL 700 RMS dual coil sub INTERIOR Sparco racing seats Sparco seat mounts (side mount) KYO seat brackets Sparco harnesses Sparco Racer 2 steering wheel NRG quick release mount WHEELS & TIRES STREET Axis Decades 18x8.5 front and 18x9.5 rear Continetal contacts 225/35/18 front and 235/30/18 rear DRAG Rota Revs 17x8 Bridgestone Potenzas 225/45/17 1" spacer in the rear SUSPENSION K-Sport coilovers MISC CS/RC front bumper custom 3" FMIC and piping custom 4" intake Samco radiator hoses Cusco oil catch cam custom aluminum overflow (made by me) Speed-Source poly motor and tranny mounts Speed-Source SS clutch line 2's R us valve cover bolts Hallman maual boost controler MSD blaster coil MSD plug wires NGK one step colder plugs Goodridge SS brake lines ABS delete FUTURE PLANS Willwood BBK St205 rear brakes St205 rear LSD Cusco under brace Cusco rear strut brace Cusco front strut brace custom fabbed rollcage respray Toyota super Red OEM st185 floor matts CS/RC hood CCW Classics custom offset wheels On to the pics! Engine painted and assembled           Powdercoated some parts   HKS 272 cams, Engle valve springs and shimless bucket conversion   HKS cam gears installed  Then HKS true timing belt   Findanza flywheel and ARP bolts  st205 tranny mated to engine    Speed-source brass shifter bushings  New OEM coolent bypass hoses (hose from hell)  Engine install   Zaklee corp clear cam gear cover (waited over a year for this!)  RMR intake manifold and BBK TB mock up    That's all for now, update soon! should be done in a month or so  |
 |
Replies
(1 - 28)
|
Jan 4, 2011 - 9:46 PM
|
|
 Enthusiast Joined Mar 8, '09 From Westport, MA Currently Offline Reputation: 6 (100%) |
wow thats sexy broo, good workkk
-------------------- st205 powered ss3 coupe
|
|
Jan 4, 2011 - 10:02 PM
|
|
|
Enthusiast Joined Mar 1, '09 From fitchburg, ma Currently Offline Reputation: 0 (0%) |
Thanks! It has been a long expensive road but will be worth it in the end!
|
|
Jan 5, 2011 - 2:13 AM
|
|
 Enthusiast Joined Dec 26, '09 From Albuquerque, NM Currently Offline Reputation: 19 (100%) |
I. Am. DIGGING. the clear belt cover. So sexy.
-------------------- taking too long to mod since '09
June '12 COTM '95 AT200 |
|
Jan 5, 2011 - 11:14 AM
|
|
|
Enthusiast Joined Mar 1, '09 From fitchburg, ma Currently Offline Reputation: 0 (0%) |
QUOTE (HectortheRican @ Jan 5, 2011 - 3:13 AM)  I. Am. DIGGING. the clear belt cover. So sexy. Thanks bro! It can be had at www.Zakleecorp.com and is gen2 only at the moment |
|
Jan 5, 2011 - 11:19 AM
|
|
 Enthusiast Joined Apr 17, '10 From U.P. michigan GO STATE Currently Offline Reputation: 3 (100%) |
looks so clean! nice work man!
-------------------- It takes 8,460 bolts to assemble an automobile, and one nut to scatter it all over the road.
 Celica: The name is derived from the Spanish word for "heavenly" or "celestial". Back-2-Back July COTM 15&16 |
|
Jan 5, 2011 - 11:28 AM
|
|
 Moderator Joined Oct 1, '02 From fall river, ma Currently Offline Reputation: 13 (100%) |
looks great bro! that mated to the 205 tranny you got from me last year?
-------------------- Former Team 5SFTE pro member ;)
 13.6@108MPH, 5SFTE Powered |
|
Jan 5, 2011 - 11:37 AM
|
|
|
Enthusiast Joined Mar 1, '09 From fitchburg, ma Currently Offline Reputation: 0 (0%) |
QUOTE (presure2 @ Jan 5, 2011 - 12:28 PM) looks great bro! that mated to the 205 tranny you got from me last year? Thanks everyone! Yes it did I just have some plumbing and wiring to do then startup time
|
|
Jan 5, 2011 - 12:16 PM
|
|
 Enthusiast Joined Oct 20, '08 From Seattle, WA Currently Offline Reputation: 5 (100%) |
Wow. Awesome 185 man, some quality parts for sure!
-------------------- 2006 BMW 330i - 6 Speed - Dinan Stage 1
2014 Toyota Rav4 XLE |
|
Jan 5, 2011 - 6:16 PM
|
|
|
Enthusiast Joined Mar 1, '09 From fitchburg, ma Currently Offline Reputation: 0 (0%) |
QUOTE (mak5603 @ Jan 5, 2011 - 1:16 PM) Wow. Awesome 185 man, some quality parts for sure! Thank you...ya they deff put a damper in my pocket  Only the best for my st185
|
|
Jan 5, 2011 - 10:41 PM
|
|
 Moderator Joined Jun 29, '08 From Denver Currently Offline Reputation: 59 (100%) |
Wow, that's a long list of parts... Seems like nothing has been left out. I'm impressed
 Any more pics of the car itself?
-------------------- "Employ your time in improving yourself by other men's writings, so that you shall gain easily what others labored hard for." -Socrates. Even Socrates told us to use the search button!
 2006 Aston Martin V8 Vantage. 1998 Celica GT- BEAMS Swapped. 2022 4Runner TRD Off Road Prenium. 2021 GMC Sierra AT4. |
|
Jan 6, 2011 - 10:22 AM
|
|
|
Enthusiast Joined Mar 1, '09 From fitchburg, ma Currently Offline Reputation: 0 (0%) |
When i got it in summer of 2004
 Track setup  Around town wheels 
|
|
Jan 6, 2011 - 11:00 AM
|
|
|
Enthusiast Joined Dec 26, '09 From Albuquerque, NM Currently Offline Reputation: 19 (100%) |
Honest opinion, you should get smaller around town wheels. Your track wheels look great, but the around towns look rather big. Maybe they're the same size and it's just the angle that's making the track wheels look smaller, but the DD wheels definitely look big. Just saying. But other that that, beautiful 185!
This post has been edited by HectortheRican: Jan 6, 2011 - 11:01 AM -------------------- taking too long to mod since '09
June '12 COTM '95 AT200 |
|
Jan 6, 2011 - 4:36 PM
|
|
|
Enthusiast Joined Mar 1, '09 From fitchburg, ma Currently Offline Reputation: 0 (0%) |
Track wheels are 17x8 all around and the around town wheels are 18x8.5 front and 18x9.5 in the rear, they look a lot better in person. They will stay until i get my Work Emotions
 |
|
Jan 6, 2011 - 4:39 PM
|
|
|
Enthusiast Joined Dec 26, '09 From Albuquerque, NM Currently Offline Reputation: 19 (100%) |
QUOTE (alltracst185 @ Jan 6, 2011 - 3:36 PM) Track wheels are 17x8 all around and the around town wheels are 18x8.5 front and 18x9.5 in the rear, they look a lot better in person. They will stay until i get my Work Emotions I want Work Emotions too. XD9 to be exact. But hsiiiieeeeeet, $400 per wheel doesn't sound like fun at all. -------------------- taking too long to mod since '09
June '12 COTM '95 AT200 |
|
Jan 6, 2011 - 5:01 PM
|
|
 Enthusiast Joined Dec 19, '07 From tx Currently Offline Reputation: 22 (100%) |
Damn son - you just gave me engine envy
9.0:1? Nice! --------------------  ENGINE: '93 RC 3S-GTE/WRC CT-20b [18-20PSI] PERF: TRD/HKS/ARP/NGK/MSD/ACT/Blitz/STRI/APEX'i/TwosRus/GReddy/Magnaflo/KOYO SUSP: Tein/Bilstein/SusTech/ INT: SS-III SEATS/Toyota Hyper Sports EXT: WRC/TRD/404 QUOTE (lagos @ Aug 25, 2010 - 10:13 AM) Its a safety feature so that people like you don't end up killing themselves or everyone around them. Slow down Paul Walker. 6GC Chat - Go there: [url="http://www.griffgirl.com/forum/chat/index.php[/url] |
|
Jan 6, 2011 - 10:50 PM
|
|
|
Enthusiast Joined Mar 1, '09 From fitchburg, ma Currently Offline Reputation: 0 (0%) |
QUOTE (DEATH @ Jan 6, 2011 - 5:01 PM) Damn son - you just gave me engine envy 9.0:1? Nice! Haha, thanks! I will be working on buttoning everything up this Sunday Hoping for startup this week.
|
|
Jan 6, 2011 - 11:02 PM
|
|
|
Enthusiast Joined Nov 8, '08 From Penn Valley,Ca Currently Offline Reputation: 1 (100%) |
What are your power goals? I love this man! That clear timing belt cover is pretty awesome, I never would have thought that it would be a good idea. Some in car videos will be a must!
--------------------  |
|
Jan 7, 2011 - 6:45 PM
|
|
|
Enthusiast Joined Mar 1, '09 From fitchburg, ma Currently Offline Reputation: 0 (0%) |
QUOTE (epocsirhc @ Jan 7, 2011 - 12:02 AM) What are your power goals? I love this man! That clear timing belt cover is pretty awesome, I never would have thought that it would be a good idea. Some in car videos will be a must! Thanks! I'm guning for 500+ AWHP
|
|
Jan 7, 2011 - 7:21 PM
|
|
|
Moderator Joined Oct 1, '02 From fall river, ma Currently Offline Reputation: 13 (100%) |
hey do you have a list of PT#'s for the abs delete? we're prolly gonna do the same to jims 'trac when he comes back up for more mods down the road.
TIA! -------------------- Former Team 5SFTE pro member ;)
13.6@108MPH, 5SFTE Powered |
|
Jan 8, 2011 - 11:28 AM
|
|
|
Enthusiast Joined Mar 1, '09 From fitchburg, ma Currently Offline Reputation: 0 (0%) |
QUOTE (presure2 @ Jan 7, 2011 - 8:21 PM) hey do you have a list of PT#'s for the abs delete? we're prolly gonna do the same to jims 'trac when he comes back up for more mods down the road. TIA! Not available anymore  but you can still get them from a st, gt or even a non ABS all-trac.47314-20360 Line passenger to P-valve 47313-20480 Line P-valve to 3-way 47311-20710 Line P-valve to master cylinder 47315-20490 Line driver to 3-way (same on both ABS & w/o ABS, no need to remove or replace) Still available from Toyota, low stock: 47312-20190 Line master cyl to 3-way 47150-20140 AWD Non-ABS Proportioning valve 90413-10182 3-way Best to source from a junkyard. |
|
Jan 8, 2011 - 5:06 PM
|
|
 Enthusiast Joined Feb 2, '07 From Berlin, WI Currently Offline Reputation: 18 (100%) |
I want an alltrac! sucks trying to find them rust free in WI.
--------------------  *1997 Celica ST - 3SGE Greytop BEAMS *1977 Celica RA29 - Classic Cruiser *2005 Matrix AWD - dedded but still hanging around like a ghost 2019 Rav4 XLE Premium - Sports mode is fun. |
|
Jan 8, 2011 - 6:15 PM
|
|
|
Enthusiast Joined Oct 20, '08 From Seattle, WA Currently Offline Reputation: 5 (100%) |
QUOTE (cheela @ Jan 8, 2011 - 6:06 PM) I want an alltrac! sucks trying to find them rust free in WI. Too bad you're not in WA. I want to sell mine. -------------------- 2006 BMW 330i - 6 Speed - Dinan Stage 1
2014 Toyota Rav4 XLE |
|
Jan 9, 2011 - 1:40 PM
|
|
|
Enthusiast Joined Mar 1, '09 From fitchburg, ma Currently Offline Reputation: 0 (0%) |
QUOTE (cheela @ Jan 8, 2011 - 5:06 PM) I want an alltrac! sucks trying to find them rust free in WI. It took me almost 3 years to find a clean one owner trac in New England 
|
|
Jan 12, 2011 - 3:16 PM
|
|
|
Enthusiast Joined Dec 8, '03 From Lancaster CA Currently Offline Reputation: 6 (100%) |
very nice! i cant wait till i get my All-Trac finished. what TB is that and what are you using for TPS?
-------------------- 2001 Celica GT-S Turbo
1997 Supra TT 6speed 1997 Celica 3MZ/1MZ swap 1990 Celica All-Trac |
|
Jan 13, 2011 - 11:48 AM
|
|
|
Enthusiast Joined Mar 1, '09 From fitchburg, ma Currently Offline Reputation: 0 (0%) |
QUOTE (Smaay @ Jan 12, 2011 - 4:16 PM) very nice! i cant wait till i get my All-Trac finished. what TB is that and what are you using for TPS? It's a 70mm BBK from a mustang, i'm just going to us the mustang TPS or block it and use cable tension to set idle. |
|
Jan 18, 2011 - 1:25 PM
|
|
|
Enthusiast Joined Mar 1, '09 From fitchburg, ma Currently Offline Reputation: 0 (0%) |
Ordered the last of my parts lastnight...should be up and running soon!
|
|
Jan 18, 2011 - 1:55 PM
|
|
|
Moderator Joined Oct 1, '02 From fall river, ma Currently Offline Reputation: 13 (100%) |
QUOTE (alltracst185 @ Jan 18, 2011 - 1:25 PM) Ordered the last of my parts lastnight...should be up and running soon! awesome! hey, do you know of any local AWD dynos? i have heard that one recently opened in seekonk, but havent confirmed it. -------------------- Former Team 5SFTE pro member ;)
13.6@108MPH, 5SFTE Powered |
|
Jan 18, 2011 - 9:13 PM
|
|
|
Enthusiast Joined Mar 1, '09 From fitchburg, ma Currently Offline Reputation: 0 (0%) |
Dentsport, ESP, KTR, Connetic motorsports, synaptic 3. there are a few others but, i can't think of the names right now.
|
 |
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
| Lo-Fi Version | Time is now: April 23rd, 2025 - 2:22 PM |