![]() |
![]() |
![]() |
|
![]() Enthusiast ![]() ![]() ![]() Joined Jun 2, '10 From Davenport, Florida Currently Offline Reputation: 0 (0%) ![]() |
my drivers side rear window switch decided it didnt like the up position, it goes down fine so its not the motor but when you hit the button to go up it does nothing. now my rear window is stuck down
![]() ![]() -------------------- ![]() |
![]() |
![]() |
|
![]() Enthusiast ![]() ![]() ![]() Joined Jun 2, '10 From Davenport, Florida Currently Offline Reputation: 0 (0%) ![]() |
ok its not the switch.... it was easy enough to pull apart and look at the throw and its fine... is there a relay for just the up postion and if so where is it located?
-------------------- ![]() |
![]() |
|
![]() Enthusiast ![]() ![]() ![]() Joined Sep 29, '09 From Prince George, BC CANADA EH! Currently Offline Reputation: 8 (100%) ![]() |
![]() The switch just switches the polarity of the two motor contacts, if your window goes down it should go back up. In an emergency like this one you can just throw 12V and ground on the plug going to the motor itself and it will either go up or down This post has been edited by schmooot: Mar 18, 2011 - 2:55 PM -------------------- ST205 Crew represent
![]() Challenge Accepted |
![]() |
|
![]() Enthusiast ![]() ![]() ![]() Joined Sep 29, '09 From Prince George, BC CANADA EH! Currently Offline Reputation: 8 (100%) ![]() |
wait you said rear window? better just ignore my last post then
is this a vert? This post has been edited by schmooot: Mar 18, 2011 - 2:58 PM -------------------- ST205 Crew represent
![]() Challenge Accepted |
![]() |
|
![]() Enthusiast ![]() ![]() ![]() ![]() ![]() Joined Oct 5, '03 From South TX. Currently Offline Reputation: 14 (100%) ![]() |
its a vert, when this happens u usually take the switch apart and clean the copper contacts inside and put it back together. its fairly common
|
![]() |
|
![]() Enthusiast ![]() ![]() ![]() ![]() ![]() Joined Jan 18, '08 From Houston Currently Offline Reputation: 7 (100%) ![]() |
^yeah- Very true!
OP- Mine had all kinds of funny problems- I dont remember the pins off the top of my head- but you can hit em with your multimeter looking for DC voltage. only 2 will give you voltage. the other two are the motor feed lines. put one charged pin with one uncharged (motor) pin, and the other charged pin with the other uncharged (motor) pin. if it goes down, then switch the uncharged pins. (foward or reverse polarity determine if teh window goes up or down) I want to say it was (inline) ( mtr+ / mtr- / 12vdc- / 12vdc+ ) but dont hold me to that, i may be thinking of the foward windows.... -------------------- QUOTE (presure2 @ Nov 6, 2010 - 6:16 AM) Via FB: fcuking awsome!!! D-man FTW! Damn D-Man - most impressive. D-Man's post should be a sticky LOL, oh boy, you can always count on D-Man for ridiculously hilarious posts. |
![]() |
|
![]() Enthusiast ![]() ![]() ![]() Joined Jun 2, '10 From Davenport, Florida Currently Offline Reputation: 0 (0%) ![]() |
thanks for the help... i took apart the switch last night and cleaned up the contacts but still nothing, when you hit the up position you hear the click of the switch but nothing from the window when you hit down you hear what sounds like a relay and the lights dim slightly (window is full down) so its kinda weird the switch looks good but i dont have a multimeter to test it.. hoping it doesnt rain before monday i'm just gonna take it to my mechanic and say whatever it needs get it done
-------------------- ![]() |
![]() |
|
![]() Enthusiast ![]() ![]() ![]() ![]() ![]() Joined Mar 15, '07 From Tennessee Currently Offline Reputation: 52 (100%) ![]() |
sounds like a ground issue..
-------------------- Learned a lot in 10 years... I hardly log in anymore, last login Today Sept 6 2019, and I was forced just to clarify a post. LOL
If you PM me and I dont respond, dont fret or cry. Im alive, better post your questions in the thread below, maybe I log back in 2grfe Swapped... Why I chose the 2GR, before you ask read here... A great civilization is not conquered from without until it has destroyed itself from within. @llamaraxing in Instagram is the best way to find me. I hardly log here anymore. |
![]() |
|
![]() Enthusiast ![]() ![]() ![]() Joined Jun 2, '10 From Davenport, Florida Currently Offline Reputation: 0 (0%) ![]() |
so it is the switch... and not a contact cleaning issue... if you tap on the switch with a wrench while holding the up button it eventually brings the window up... ordered a new switch from the dealer $48 + $10 shipping should have it in a few days
This post has been edited by b22ri22an: Mar 21, 2011 - 12:05 PM -------------------- ![]() |
![]() |
|
![]() Enthusiast ![]() ![]() ![]() Joined Jun 2, '10 From Davenport, Florida Currently Offline Reputation: 0 (0%) ![]() |
blah... got sent a passenger side switch will have to call on monday about getting the right switch
-------------------- ![]() |
![]() ![]() |
Lo-Fi Version | Time is now: February 13th, 2025 - 12:24 PM |