 OBD2 port not working |
 Mar 19, 2011 - 6:57 PM
|
 
|
 Enthusiast Joined Oct 29, '05 From Muskego, WI Currently Offline Reputation: 0 (0%)  |
Wanted to fix my codes, and rented a code reader.
reader will not power up when connected in the celi, I tryed it in another car and the reader is good. any help? there is only 4 wires going to the port. |
 |
Replies
(1 - 3)
|
Mar 27, 2011 - 10:01 PM
|
|
 Enthusiast  Joined Oct 25, '07 From Eagan, MN Currently Offline Reputation: 3 (100%) |
Use a voltmeter and check to see if your port is receiving power and then check ground also
-------------------- -Tyler
|
|
Feb 9, 2012 - 12:01 AM
|
|
|
Enthusiast Joined Oct 29, '05 From Muskego, WI Currently Offline Reputation: 0 (0%) |
Going to sum this post up as well: hopefully this will help someone in the future.
The code reader I rented had an internal short. This blew an OBD fuse on the celi. This fuse is located under the PASSENGER kick panel (there is like only 1 or 2 fuses over there). replace fuse, complain to the place of the shotty code reader, swap out for better one, read codes  -Kyle |
|
Feb 9, 2012 - 3:02 PM
|
|
 Enthusiast Joined Apr 23, '08 From Muskego,Wi Currently Offline Reputation: 8 (100%) |
bringing it back from the dead kyle ever figure out your issue?
-------------------- 2nd Gen 3s-gte.... It lives!
97celiman "92-gt-quit making up random acronyms that dont mean anything. the only real acronym is JDM" |
 |
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
| Lo-Fi Version | Time is now: November 23rd, 2024 - 10:53 AM |