 Headlight won't come on, I've pinpointed the problem, but I still need a bit of help |
 Oct 1, 2011 - 2:21 PM
|
 
|
 Enthusiast  Joined Dec 26, '09 From Albuquerque, NM Currently Offline Reputation: 19 (100%)  |
Short story: My driver side headlight won't come on.
Detailed story: I had 8000K HIDs, and the driver side was starting to lose a bit of color. I bought a set of 6000K HIDs to replace them a few weeks ago and finally got around to it today. I got 'em all buttoned up, it's perfect, everything's connected. Real cherry. So I start up the car and only the passenger side comes on. Several more switching on/off, same story. I'll also add that the driver side usually came on before, but sometimes it wouldn't and would take me a few tries to get it going. My question is: Could it be the fuse? I'm heading up to Wal-Mart in a bit to get some, it's worth a shot. Does anyone have any other suggestions? Edit: Both the old 8000Ks and the new 6000Ks are the same brand. Both Xentec, so it's quality stuff. The only difference is the 6000Ks have slim ballasts. The bulbs were protected with foam wraps and never dropped, dinged, tapped. The ballasts were cared for. So I'm highly doubtful it's the HID system. This post has been edited by HectortheRican: Oct 1, 2011 - 8:42 PM -------------------- taking too long to mod since '09
June '12 COTM '95 AT200 |
 |
Replies
(1 - 13)
|
Oct 1, 2011 - 2:57 PM
|
|
 Enthusiast Joined Feb 24, '07 From Oahu, Hawaii Currently Offline Reputation: 23 (100%) |
connect your stock bulb on the stock elec lines first, if it lights up then its your HID system
-------------------- I don't normally drive fast, but when I do its on a curvy section of this island
 |
|
Oct 1, 2011 - 3:45 PM
|
|
|
Enthusiast Joined Dec 26, '09 From Albuquerque, NM Currently Offline Reputation: 19 (100%) |
QUOTE (808celica @ Oct 1, 2011 - 1:57 PM)  connect your stock bulb on the stock elec lines first, if it lights up then its your HID system I'm so glad you said that. I have an extra 9006 in my trunk. Hopefully it's still good... -------------------- taking too long to mod since '09
June '12 COTM '95 AT200 |
|
Oct 1, 2011 - 4:44 PM
|
|
 Moderator Joined Jun 29, '08 From Denver Currently Offline Reputation: 59 (100%) |
For what it's worth, Xentec is not quality. Did you get a whole new kit it just new bulbs? It could be an issue in the ballast but it sounds like you replaced the ballasts as well. It could be the fuse but those are kind of a worky/no worky thing, they don't just fade out like that. Nonetheless, they're easy to check so you might as well check the fuse. It's safer to run power wires directly from your battery to your ballasts so it's possible that a wire got cooked.
-------------------- "Employ your time in improving yourself by other men's writings, so that you shall gain easily what others labored hard for." -Socrates. Even Socrates told us to use the search button!
 2006 Aston Martin V8 Vantage. 1998 Celica GT- BEAMS Swapped. 2022 4Runner TRD Off Road Prenium. 2021 GMC Sierra AT4. |
|
Oct 1, 2011 - 5:14 PM
|
|
|
Enthusiast Joined Dec 26, '09 From Albuquerque, NM Currently Offline Reputation: 19 (100%) |
QUOTE (richee3 @ Oct 1, 2011 - 3:44 PM) For what it's worth, Xentec is not quality. Did you get a whole new kit it just new bulbs? It could be an issue in the ballast but it sounds like you replaced the ballasts as well. It could be the fuse but those are kind of a worky/no worky thing, they don't just fade out like that. Nonetheless, they're easy to check so you might as well check the fuse. It's safer to run power wires directly from your battery to your ballasts so it's possible that a wire got cooked. Well I tested both fuses and they're good. I tested the wires with an extra 9006 bulb I had and that worked. So it's either the HID bulb or the ballast. What a bother... Edit: Well I sucked it up and bought another HID kit. Xentec too... but it has a 2 year warranty. The first ones I had were Xentec and they worked just fine. These new ones, it's probably just a bad ballast. This post has been edited by HectortheRican: Oct 1, 2011 - 5:26 PM -------------------- taking too long to mod since '09
June '12 COTM '95 AT200 |
|
Oct 1, 2011 - 5:30 PM
|
|
|
Moderator Joined Jun 29, '08 From Denver Currently Offline Reputation: 59 (100%) |
Try swapping your ballasts from side to side to see if anything changes.
-------------------- "Employ your time in improving yourself by other men's writings, so that you shall gain easily what others labored hard for." -Socrates. Even Socrates told us to use the search button!
2006 Aston Martin V8 Vantage. 1998 Celica GT- BEAMS Swapped. 2022 4Runner TRD Off Road Prenium. 2021 GMC Sierra AT4. |
|
Oct 1, 2011 - 6:07 PM
|
|
|
Enthusiast Joined Dec 26, '09 From Albuquerque, NM Currently Offline Reputation: 19 (100%) |
QUOTE (richee3 @ Oct 1, 2011 - 4:30 PM) Try swapping your ballasts from side to side to see if anything changes. Eh, didn't think about that. Pointless now, I already ordered the new kit. I'm gonna go test if it's the bulb by using one of my old ones... -------------------- taking too long to mod since '09
June '12 COTM '95 AT200 |
|
Oct 1, 2011 - 8:44 PM
|
|
|
Enthusiast Joined Dec 26, '09 From Albuquerque, NM Currently Offline Reputation: 19 (100%) |
Alright, turns out that it wasn't the bulb OR the ballast (I'm not 100% sure on if they work perfectly, but I'll cross that bridge once I solve the actual problem).
So the REAL problem is the connector for the lights coming from the car's power supply. There are two wires connected to it, a black one and a white one. Well the black one is loose. That was the problem. Any ideas on how I can re-attach it? -------------------- taking too long to mod since '09
June '12 COTM '95 AT200 |
|
Oct 1, 2011 - 9:06 PM
|
|
|
Enthusiast Joined Feb 24, '07 From Oahu, Hawaii Currently Offline Reputation: 23 (100%) |
wait which connector has the loose wire? you didnt specify on FB if it was your stock harness or the HID system.
-------------------- I don't normally drive fast, but when I do its on a curvy section of this island
|
|
Oct 2, 2011 - 3:18 AM
|
|
|
Enthusiast Joined Dec 29, '05 From So-Cal Currently Offline Reputation: 12 (100%) |
should have bought ddm kit... i recommend bc of lifetime warranty.
|
|
Oct 2, 2011 - 3:34 AM
|
|
|
Enthusiast Joined Dec 26, '09 From Albuquerque, NM Currently Offline Reputation: 19 (100%) |
QUOTE (808celica @ Oct 1, 2011 - 8:06 PM) wait which connector has the loose wire? you didnt specify on FB if it was your stock harness or the HID system. Stock harness. I'm gonna try and jam it back in tomorrow. If not, I'll be making junkyard calls on Monday. Hopefully if I find a Celi, it has foglight stuff... -------------------- taking too long to mod since '09
June '12 COTM '95 AT200 |
|
Oct 2, 2011 - 7:11 AM
|
|
|
Enthusiast Joined Aug 30, '02 From San Juan, PR Currently Offline Reputation: 4 (100%) |
Mine used to do that. Ended up being the ballast going bad.
-------------------- Past - 7A-FTE: Will never forget you
Present - 3rd Gen 3S-GTE: Swap in progress QUOTE (SinisterSinner @ Dec 19, 2009 - 10:52 AM) I dont want to even think of turbos, they blow up way too often... |
|
Oct 2, 2011 - 9:00 AM
|
|
|
Moderator Joined Jun 29, '08 From Denver Currently Offline Reputation: 59 (100%) |
Wait, it's a fog light? I thought it was a headlight. Any car with an H3 bulb will work, it doesn't need to be Celica specific.
-------------------- "Employ your time in improving yourself by other men's writings, so that you shall gain easily what others labored hard for." -Socrates. Even Socrates told us to use the search button!
2006 Aston Martin V8 Vantage. 1998 Celica GT- BEAMS Swapped. 2022 4Runner TRD Off Road Prenium. 2021 GMC Sierra AT4. |
|
Oct 2, 2011 - 12:53 PM
|
|
|
Enthusiast Joined Dec 26, '09 From Albuquerque, NM Currently Offline Reputation: 19 (100%) |
QUOTE (richee3 @ Oct 2, 2011 - 8:00 AM) Wait, it's a fog light? I thought it was a headlight. Any car with an H3 bulb will work, it doesn't need to be Celica specific. No, no it's the head light that needs fixing. I'm just hoping there's also fog light stuff so I can get mine wired. -------------------- taking too long to mod since '09
June '12 COTM '95 AT200 |
 |
3 User(s) are reading this topic (3 Guests and 0 Anonymous Users)
0 Members:
| Lo-Fi Version | Time is now: January 15th, 2025 - 1:36 PM |