6G Celicas Forums

Welcome Guest ( Log In | Register )

> inside gauges not lighting up??
post Dec 27, 2011 - 7:34 PM
+Quote Post
hzawde

Enthusiast
*
Joined Nov 13, '10
From Calgary
Currently Offline

Reputation: 0 (0%)




hey guys , so my lighting was all good until today, i was taking off my trim near the wheel,
then put it back on and now when i turn on my lights the gauges don't light up? nothing got
unplugged i checked, for some reason they just wont go on??
 
Start new topic
Replies (1 - 11)
post Dec 27, 2011 - 10:43 PM
+Quote Post
richee3



Moderator
*****
Joined Jun 29, '08
From Denver
Currently Offline

Reputation: 59 (100%)




Chrck the fuse? It's the one labeled panel. Also, I know you said nothing is unplugged, but I would double check the plug and all the wires for the dimming switch. Your gauges won't illuminate with that unplugged. It's possible the wires could be old and brittle, possibly breaking when they got moved around.


--------------------
"Employ your time in improving yourself by other men's writings, so that you shall gain easily what others labored hard for." -Socrates. Even Socrates told us to use the search button!

2006 Aston Martin V8 Vantage.
1998 Celica GT-
BEAMS Swapped.
2022 4Runner TRD Off Road Prenium.
2021 GMC Sierra AT4.
post Dec 28, 2011 - 2:13 AM
+Quote Post
hzawde

Enthusiast
*
Joined Nov 13, '10
From Calgary
Currently Offline

Reputation: 0 (0%)




but its also all the lighting in my car, not just the gauges , climate too
post Dec 28, 2011 - 11:00 PM
+Quote Post
richee3



Moderator
*****
Joined Jun 29, '08
From Denver
Currently Offline

Reputation: 59 (100%)




Does everything seem to function perfectly fine, just no illumination?


--------------------
"Employ your time in improving yourself by other men's writings, so that you shall gain easily what others labored hard for." -Socrates. Even Socrates told us to use the search button!

2006 Aston Martin V8 Vantage.
1998 Celica GT-
BEAMS Swapped.
2022 4Runner TRD Off Road Prenium.
2021 GMC Sierra AT4.
post Dec 30, 2011 - 1:09 AM
+Quote Post
hzawde

Enthusiast
*
Joined Nov 13, '10
From Calgary
Currently Offline

Reputation: 0 (0%)




thanks everyone got it fixed , just the panel fuse smile.gif
post Jan 3, 2012 - 2:09 PM
+Quote Post
hzawde

Enthusiast
*
Joined Nov 13, '10
From Calgary
Currently Offline

Reputation: 0 (0%)




ok so i thought it was just the panel fuse , but when i replace the fuse, all the lighting works, but as soon
as a i release my emergency brake everything goes black, and the fuse breaks, if i dont use the ebrake
everything still stays lit, whats the issue here???
post Jan 3, 2012 - 4:40 PM
+Quote Post
richee3



Moderator
*****
Joined Jun 29, '08
From Denver
Currently Offline

Reputation: 59 (100%)




Sounds to me like a short somewhere related to the e-brake light. Possibly cracked wire sheaths somewhere, but they would have to be wires that move based on the position of the handle, and I don't think there are any wires that move. Hmm... Let me think about this for a minute.


--------------------
"Employ your time in improving yourself by other men's writings, so that you shall gain easily what others labored hard for." -Socrates. Even Socrates told us to use the search button!

2006 Aston Martin V8 Vantage.
1998 Celica GT-
BEAMS Swapped.
2022 4Runner TRD Off Road Prenium.
2021 GMC Sierra AT4.
post Jan 25, 2012 - 11:40 PM
+Quote Post
199celica

Enthusiast
**
Joined Jul 29, '11
From chino, Ca
Currently Offline

Reputation: 4 (100%)




only thing that causes fuses to blow is an open ground that makes contact when its not supposed to. do you have any aftermarket lighting or any of that fun pretty stuff?
post Jan 28, 2012 - 2:59 PM
+Quote Post
hzawde

Enthusiast
*
Joined Nov 13, '10
From Calgary
Currently Offline

Reputation: 0 (0%)




QUOTE (199celica @ Jan 25, 2012 - 11:40 PM) *
only thing that causes fuses to blow is an open ground that makes contact when its not supposed to. do you have any aftermarket lighting or any of that fun pretty stuff?



ya i have aftermarket gauges, and i remember the guy that installed them, just taped off the ground , instead of actually grounding it
post Jan 28, 2012 - 3:09 PM
+Quote Post
richee3



Moderator
*****
Joined Jun 29, '08
From Denver
Currently Offline

Reputation: 59 (100%)




I'd fix that ground. So it's your aftermarket gauges that won't light up? This sheds new light on the subject. I would definitely wire that ground up and double check the positive lead.


--------------------
"Employ your time in improving yourself by other men's writings, so that you shall gain easily what others labored hard for." -Socrates. Even Socrates told us to use the search button!

2006 Aston Martin V8 Vantage.
1998 Celica GT-
BEAMS Swapped.
2022 4Runner TRD Off Road Prenium.
2021 GMC Sierra AT4.
post Jan 29, 2012 - 11:40 AM
+Quote Post
hzawde

Enthusiast
*
Joined Nov 13, '10
From Calgary
Currently Offline

Reputation: 0 (0%)




QUOTE (richee3 @ Jan 28, 2012 - 4:09 PM) *
I'd fix that ground. So it's your aftermarket gauges that won't light up? This sheds new light on the subject. I would definitely wire that ground up and double check the positive lead.



well its not just that its everything, that lights up inside, gauges, climate control, the blue leds by my feet , everything, and it only blows
the fuse when i put my handbrake down
post Jan 29, 2012 - 1:21 PM
+Quote Post
199celica

Enthusiast
**
Joined Jul 29, '11
From chino, Ca
Currently Offline

Reputation: 4 (100%)




Sounds interesting i wish i could see the car. i wonder if he integrated the aftermarket fuse with the interior lighting fuse and when that ground comes loose from the tape it blows the fuse but other than that i'm stumped sorry bud.

Reply to this topicStart new topic
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:

 



Lo-Fi Version Time is now: November 26th, 2024 - 7:16 PM