6G Celicas Forums

Welcome Guest ( Log In | Register )

> aftermarket remote locking
post Jul 9, 2013 - 11:22 AM
+Quote Post
Dennisthe10

Enthusiast
*
Joined Oct 30, '12
From Cheshire
Currently Offline

Reputation: 0 (0%)




Hi guys. Fitting a hawk universal remote locking system. Sussed out the door polarities etc so 99% confident wiring this in but.....need to know where to take a permanent live from? Hawk have told me the white thick wire in the steering column but the only thick wire is white and black, I dont think this would be a perm live anyway? any ideas appreciated. I did use the search before some wise ass replies with that biggrin.gif looks like there is a thick white going into the back end of the ignition barrell.....99 st btw. Thanks in advance smile.gif
 
Start new topic
Replies (1 - 2)
post Jul 9, 2013 - 12:31 PM
+Quote Post
Nihil



Enthusiast
**
Joined Jul 17, '12
From Slovenia
Currently Offline

Reputation: 0 (0%)




Here I found a quick cheat sheet for basic wiring, I also installed an alarm a year ago so I can say it's correct as far as I can remember it...
It says WHITE or BLACK/RED from the ignition harness, because 12V constant voltage is on both wires. But you can easily make sure which wire does what with voltmeter.



--------------------
post Jul 9, 2013 - 12:38 PM
+Quote Post
Dennisthe10

Enthusiast
*
Joined Oct 30, '12
From Cheshire
Currently Offline

Reputation: 0 (0%)




QUOTE (Nihil @ Jul 9, 2013 - 1:31 PM) *
Here I found a quick cheat sheet for basic wiring, I also installed an alarm a year ago so I can say it's correct as far as I can remember it...
It says WHITE or BLACK/RED from the ignition harness, because 12V constant voltage is on both wires. But you can easily make sure which wire does what with voltmeter.


You're a star my man, thank you. That cheat sheet is gonna come in handy biggrin.gif

Reply to this topicStart new topic
3 User(s) are reading this topic (3 Guests and 0 Anonymous Users)
0 Members:

 



Lo-Fi Version Time is now: December 4th, 2024 - 11:14 PM