3SGTE swap - fuel pump relay/resistor Options

[digs]

I kinda have used the search, but was after an answer for an idot if anyone can help.....

3SFTE is out (after blowing cylinder 3.....) and 3sgte rev 3 going in! A mechanic, not my self, is doing the swap, and has encountered the fuel pump issue...i.e. it won't work!

He knows the faff has a relay for it's fuel pump, which my 3sfe lacks. Assuming the 5sfe is the same, can anyone explain simply (to me) how this is sorted out ?

Using rev 3 3SGTE, with rev 3 loom, and have the faff fuel pump relay. Not sure where the 3sfe fuel pump is coming off, guessing same as 5sfe ?

Thanks for any help at all! Everything is looking brilliant!

[digs]

should add, mechanic has a plan, but looking also at what other have done - actual fuel pump is aftermarket walbro equiv.

[Malek]

This should help..

http://www.6gc.net/forums/index.php?showtopic=65840

and if not..Here's another..

http://www.6gc.net/forums/index.php?showtopic=82196

Idk what the difference in wiring is between 5sfe and 3sfe (if any)..

Good luck!

[digs]

This should help..

http://www.6gc.net/forums/index.php?showtopic=65840

and if not..Here's another..

http://www.6gc.net/forums/index.php?showtopic=82196

Idk what the difference in wiring is between 5sfe and 3sfe (if any)..

Good luck!

Awesome, first link looks good!

[mkernz22]

you need to get a walboro 255lph fuel pump for the 3sgte

[digs]

you need to get a walboro 255lph fuel pump for the 3sgte

Cheers Have one of these fitted http://www.tuningdevelopments.co.uk/produc...products_id=201
Had it on for the 3sfte

This post has been edited by digs: May 1, 2014 - 4:27 PM