6G Celicas Forums

Welcome Guest ( Log In | Register )

> Clear finishing exterior plastic
post Feb 12, 2004 - 6:03 PM
+Quote Post
Uppitycracker



Enthusiast
****
Joined Jul 12, '03
From Chatham, Ont
Currently Offline

Reputation: 0 (0%)




Ive done this before with turn signals and head lamps on my mx-3, they came out looking new but my head lamps soon became yelling and peeling, could this just be because of the heat produced by the bulbs? Im planning on refinishing my tail lamps and signals over the winter so they are plenty cured for the spring, any tips on products or methods?? Thanks guys
 
Start new topic
Replies (1 - 1)
post Feb 15, 2004 - 9:25 AM
+Quote Post
NEVERSTOP

Enthusiast
*****
Joined Nov 4, '02
From Davenport Iowa
Currently Offline

Reputation: 0 (0%)




something I found that works good for cleaning up tail lights and head lights is that eagle one poslishing wads.. it comes in a silver tin can and its kinda like a cloth substance... it works pretty good if you don't have any major discoloration or scrapes.

Other wise just have a body shop clear coat them for you.. will prolly end up costing about the same as if you do it yourself and they have better materials etc.


--------------------

99 project version 3.0.. hello SEMA 2010 =)

Reply to this topicStart new topic
3 User(s) are reading this topic (3 Guests and 0 Anonymous Users)
0 Members:

 



Lo-Fi Version Time is now: December 4th, 2024 - 11:44 PM