FS: Group Buy for Custom Ring and Pinion on S54 Transmission, PRICING inside! Options

[BonzaiCelica]

This is for the S54 transmission! This is only useful for those with a 3rd or 4th Gen 3SGE motor. For those increasing their rpm ceiling and making power in the 7600-8000 rpm range with vvt-i enable cat cams and standalone ecu is perfect because the stock 4.176 ratio is too long when tuning the engine for the higher rev range......

Finally after over a year of waiting. the day has come!!! v

MFactory is the Manufacture and sister company of syncrotech. Mfactory said we need 15 people in order to make this batch. Please share this with others at local track events because we need to hit our goal of 15 people.

I will be taking deposit of $475 from everyone before we place our order through PayPal. Mfactory told me we they would like the payment by 7/12/2018, but they could possible extend it for us.


Increase in torque from 4.176 - 4.9 is 18.11%

4.900 final drive in your s54 transmission will gain 27 ft lb torque + 152 = 179 ft lb tq


Prices as follows :

$575 shipped USA

$660 Shipped International



here is mfactory gear speed calculator

http://www.teammfactory.com/calculator

This post has been edited by BonzaiCelica: Jun 1, 2018 - 7:04 PM

[BonzaiCelica]

these are the people i have so Far:

El Tiburon Negro (6gc) = Confirmed
SLOWST204 (6gc) = Confirmed
Tigawoods (6gc) = Confirmed
Charley Rouane (from MR20C and Facebook) = Confirmed
Sir_smeghed (Australia) = Confirmed
Yotoko (France) = Confirmed
abflug(Belgium) = Confirmed
Ethan Flowe (Facebook) = Confirmed

This post has been edited by BonzaiCelica: Sep 21, 2018 - 10:16 AM

[alwayzsidewayz]

Interested too

[BonzaiCelica]

i have already found a company and at $700 i don't think it'll get any cheaper than that!

This post has been edited by BonzaiCelica: Jan 30, 2018 - 8:51 PM

[a2daj1]

Would like to know the quote first!

[BonzaiCelica]

Useless information

This post has been edited by BonzaiCelica: Oct 15, 2017 - 3:43 AM

[Tigawoods]

but straight cuts are harsher in shifting I believe. as well as not as long life as helical. I used to read up on all that a while ago. basically forgot all of it lol

[BonzaiCelica]

the guys below in the comment section say it doesnt affect shifting. they say its cheaper to make as well and it any failure it wont affect any other parts inside transmission. rather than the typical helical gear design found in almost all mass produced transmissions.

https://www.carthrottle.com/post/the-advant...ight-cut-gears/

[sir_smeghed]

Whoa! Sign me up for a 5.1.......

Please tell me I'm not too late?

[BonzaiCelica]

You have been added to list. Ill update info on suppliers as soon as possible

[sir_smeghed]

.

This post has been edited by sir_smeghed: Jul 8, 2017 - 4:53 PM

[BonzaiCelica]

not that it matters to some of you, but straight cut final drive install should be happening this weekend. stay tuned

[Yotoko]

Hello, i'm a friend of Charley, i'm interested too for a 5.1
If you haven't finish yet the install, could you take some pics of the montage plz ?

Thx !

[BonzaiCelica]

information was useless here

This post has been edited by BonzaiCelica: May 10, 2018 - 7:37 PM

[Yotoko]

So you tell that we need to all chose the helical style or the straight cut or we can buy each one what we want ?
Cause for me, a straight cut is okay like it's my track car, + with the exhaust, more or less sound at this point, i dont care anymore

[abflug]

Might be interested aswell.

[BonzaiCelica]

The problem is i don't have my Transmission completely disassembled yet so taking measurements so i can get quote from USA companies isn't possible.

Im waiting on Ash to give me measurements within the next 10-12 days

[slavie]

The problem is i don't have my Transmission completely disassembled yet so taking measurements so i can get quote from USA companies isn't possible.

Im waiting on Ash to give me measurements within the next 10-12 days

What kind of measurements do you need? I have an output shaft and diff with ring laying around in the garage. I have limited tools if you need super-precise measurements - only have standard calipers and 1" micrometer.

[BonzaiCelica]

stay tuned... more info coming soon

yea....

This post has been edited by BonzaiCelica: May 10, 2018 - 7:37 PM

[BonzaiCelica]

on a side note. C and S Series Transmission share the same differential. so the ring size must be the same. mfactory offers 4.785, 4.92 and 5.15 ratios for the AE92 C52 transmission.

This post has been edited by BonzaiCelica: Feb 16, 2018 - 6:12 PM