Water in headlight, Water in headlight |
Water in headlight, Water in headlight |
Jan 12, 2013 - 1:48 PM |
|
Enthusiast Joined Feb 14, '09 From Mid West Currently Offline Reputation: 7 (100%) |
So we had a lil bit of rain. My passenger side hi-beam is 1/2 full of water!!..
Removing bumper is NOT going to happen!! SO-- Can I drill a small hole for it to empty out then smear silicone over it to seal it, then peel it off if //when it happens again?.. I CAN use just the lows but it was great having hi's out on the country roads we drive to & from work making it way easier to see road verman & deer.. Yup I did a search & wish it were only condensation, but I am definitely NOT pulling the bumper cover!! I don't have the time to have it layed up again when I break stuff pulling it off!!!! !!!ALWAYS HAPPENS TO BE MY LUCK!!!.. |
Jan 28, 2013 - 5:07 AM |
|
Enthusiast Joined Aug 2, '05 From Guam Currently Offline Reputation: 15 (100%) |
Well, you could also park the car in the sun. The way i did it before for mine, is to take out the bulb, and use a heat gun, that works too, ive tried it since our cars headlights are glass. takes some time.
This post has been edited by trdproven: Jan 28, 2013 - 5:08 AM -------------------- 94 Celica GT
|Toyota OEM Japan|Toyota Racing Development|Tom's|Competition Clutch|5Zigen|Apexi| |Laille/Beatrush|Magnecor|Denso|Royal Purple|Optima|PIAA|PW JDM|Megan Racing|Nitto| |Work|Greddy|Samco|Project Mu|H&R|Gates|Moog|Rota|Yokohama|Epman|1320|Upgr8 04 Celica GT |Toyota OEM Japan|Toyota Racing Development|Tein|BC Racing|Greddy| |
Lo-Fi Version | Time is now: November 27th, 2024 - 10:22 AM |