FS ST205/204--> TRD wing, JDM power folding mirrors, Rear fog lamp, body parts for st204/5 chassis 6th Gen Options

[placham]

Okay so Im in a process of selling the car, seems like just waiting for money right now unless deal falls through.

Anyway selling parts that I removed from my personal car and replaced with stock that came with it.

First up Genuine TRD wing for st20x, will replace 2 post wing without any mods, same style wing as Supras run. Genuine toyota so cant go wrong. It has 3 holes for adjustment of the blade, comes complete without any damage, as a matter of fact it will bolt on straight onto factory Toyota black with out painting. Heres some pics of it on car before I removed it. Asking $335 shipped to USA (its not goofy looking like Hiro wing, bottom is rounded flows with car body)






Have JDM power folding mirrors, they come with switch, tested and working wires will have to be soldered in for switch, and one plug on mirror on Left side reused, I dont have another connector for that one, Right mirror connector has been repined to USDM harness, and 2 wires will have to be ran from left side to right side to power the right mirror to fold and unfold. But everything is there that is needed to install and have them working, dont have pics right now, but mirrors are the ones on car in pics above......(left mirror has small chip on top part that mounts to door body, can hardly see, but comes with all pigtails needed. asking 195 shipped to USA.

Have rare switch for St205&st20x Euro models, its the switch for rear fog light/lamps, comes with RHD vent, had it in my USDM car, US spec cars need to drill hole in vent rest of the switch bracket is there.....asking 75 shipped for whole thing to USA.....dont think I have pig tail for this tho, but one from scrap yard could be sourced.....pics coming

Have spare set of tails for hatch St20x, their late spec Kouki ones every one wants.... has some light scratches that are only visible up close, look mint ~3'+ away.......asking 235 shipped USA >>>their on car in pic#2, Pic#3 I swaped to lightly tinted and LED retrofired Kouki tails--> which I love...little FYI..

Euro plate trim, for euro style plate......asking 90 shipped to USA.

"Cusco" chassis under brace, front chassis brace for st205/4 never got around to mounting it on car, could of benefited from this at AutoCross events but oh well....... asking 125 shipped USA

I'll try to get pics tomorrow of this stuff, got lots more parts for 3SGTE engine.


All body parts are sprayed factory black so they can be mounted directly onto car with out repainting.

Thanks,
Matt.

Best way to get a hold of me is to text me on my cell 7zero83seven2one685

Reason for edit: please remember to add 'FS' in the topic title

[placham]

Sorry for late reply got lots going on. Fog switch+vent asking 75 shipped in USA .
Tails was asking 235 shipped, but I'll drop it down to 190+postage to where u live, I have slightly tinted led moded tails if you want but back has been cut open to mod and been resealed I can sell them for same price, let me know which ones you want.
No headlights for sale, they stay with car, not pulling bumper off to mess with it.
TRD wing has been sold, to overseas I lost money on it as I covered some of the postage it was a moda fuker to ship international. I have only seen 1 other like it, this one was mint. Don't know what the problem with people on this forum is, if you want it make me an offer or do payments I'll work with peole. That's how Nissan S-chassis community is ether we trade with money on top or work something out. I haven't had any offers or nothing on parts above.

Anyway I'll have OEM front and rear TRD valances/spats when they come in from Japan. They be up for sale as I won't be putting them on car since it's technically sold.
Also 3sgte/5sgte motor I have that needs to be assembled I'll be parting it out as there is no interest in it as a whole.

Matt.

This post has been edited by placham: Feb 3, 2013 - 2:52 AM

[momentai99]

Sorry for late reply got lots going on. Fog switch+vent asking 75 shipped in USA .
Tails was asking 235 shipped, but I'll drop it down to 190+postage to where u live, I have slightly tinted led moded tails if you want but back has been cut open to mod and been resealed I can sell them for same price, let me know which ones you want.
No headlights for sale, they stay with car, not pulling bumper off to mess with it.
TRD wing has been sold, to overseas I lost money on it as I covered some of the postage it was a moda fuker to ship international. I have only seen 1 other like it, this one was mint. Don't know what the problem with people on this forum is, if you want it make me an offer or do payments I'll work with peole. That's how Nissan S-chassis community is ether we trade with money on top or work something out. I haven't had any offers or nothing on parts above.

Anyway I'll have OEM front and rear TRD valances/spats when they come in from Japan. They be up for sale as I won't be putting them on car since it's technically sold.
Also 3sgte/5sgte motor I have that needs to be assembled I'll be parting it out as there is no interest in it as a whole.

Matt.

interested in the motor as a whole. let me know your price

[placham]

Sorry for late reply got lots going on. Fog switch+vent asking 75 shipped in USA .
Tails was asking 235 shipped, but I'll drop it down to 190+postage to where u live, I have slightly tinted led moded tails if you want but back has been cut open to mod and been resealed I can sell them for same price, let me know which ones you want.
No headlights for sale, they stay with car, not pulling bumper off to mess with it.
TRD wing has been sold, to overseas I lost money on it as I covered some of the postage it was a moda fuker to ship international. I have only seen 1 other like it, this one was mint. Don't know what the problem with people on this forum is, if you want it make me an offer or do payments I'll work with peole. That's how Nissan S-chassis community is ether we trade with money on top or work something out. I haven't had any offers or nothing on parts above.

Anyway I'll have OEM front and rear TRD valances/spats when they come in from Japan. They be up for sale as I won't be putting them on car since it's technically sold.
Also 3sgte/5sgte motor I have that needs to be assembled I'll be parting it out as there is no interest in it as a whole.

Matt.

interested in the motor as a whole. let me know your price

Here's link to it has pics and stuff, if you need any info just ask

Besides machine work/rebuild/misc bolts+nuts/ECU(3SGTE)/CSI/MAP sensor its all there just needs to be finished.

Paid 300 just to have cover+IM and misc parts powder coated.

2nd gen Mr2 head 3SGTE (cams/lifters/springs/valves) all there
97 Camry 5SFE block, stock crank
3SGTE stock rods
3rd Gen 3SGTE oil sump(upper+lower/oil pump+cover/cooling pipes+oil cooler)
Complete intake+TVIS valves and spacers(whole complete intake)
St205 3SGTE harness (2 wire connector is cut-besides that comes with fues box)

I'll throw in all other misc parts I have laying around have few starters, mounts, etc. And comes with 5SFE 6GC GT trans M/T-> just because I dont need it and someone could definitely use it.

Willing to let go for 1000 OBO or trade for any S-chassis parts (S13,S14 Silvia 240sx) with money on ether end, or any Skyline parts trans,diffs->RB20,25,26 engine parts too. Im looking for GTR32/33 front sub-frame, AWD oil pan from RB26,,ect.

Matt.