6G Celicas Forums

Welcome Guest ( Log In | Register )

> Building the 7afe to handle boost, Need some assistance
post Feb 5, 2013 - 1:34 PM
+Quote Post
rapid36

Enthusiast
*
Joined Feb 5, '13
Currently Offline

Reputation: 0 (0%)




Hey everyone, I own a 94 Celica ST with the 7afe motor in it. I have 4k to throw into this car and want to redo to handle boost and hopefully generate some great hp with it. I have basically every piece of parts i need gathered but still need a little help on some topics. Here are the parts I have so far:

1) 4age forged pistons still keeping it at 9.0:1.
2) forged 7afe H beam rods
3) stock crank
4) Bored out cyclinders
5) t2 turbo kit
6) aem piggy back
7) boost gauge
8) colder spark plugs
9) 440cc injectors
10) 12.1:1 FMU
11) 255 fuel pump
12) wide band o2 sensor and gauge

The thing ive been thinking about is, Do i need a different crank to handle the extra stress that i will be putting on this motor? some people online are saying its forged and the other half are saying its not forged. So does anyone know for sure which one it is??

I have no idea how much power i will be able to generate with this setup but it will be towed to the dyno shop as soon as the build is complete. Of course i wanna make sure everything is able to handle the boost ima be shoving into it. I have no idea on how much boost i will be able to run, hopefully 15psi or more depending on what the dyno people do. I have never turbod a 7afe before only did hyundai tiburons before this, but i did do tons of research on the 7afe, but still have some remaining questions.

Also does anyone know what else will be needed to do to sqeeze the most power out of this motor as i can? without doing a swap of any kind. Also it will be nice to know if anyone has a similar build and see what kind of numbers they are generating.

Thanks.

This post has been edited by rapid36: Feb 5, 2013 - 1:57 PM
 
Start new topic
Replies
post Feb 11, 2013 - 1:26 PM
+Quote Post
Smaay

Enthusiast
*****
Joined Dec 8, '03
From Lancaster CA
Currently Offline

Reputation: 6 (100%)




i still no point in sinking all that money into a 7A


--------------------
2001 Celica GT-S Turbo
1997 Supra TT 6speed
1997 Celica 3MZ/1MZ swap
1990 Celica All-Trac
post Feb 11, 2013 - 5:56 PM
+Quote Post
rapid36

Enthusiast
*
Joined Feb 5, '13
Currently Offline

Reputation: 0 (0%)




QUOTE (Smaay @ Feb 11, 2013 - 2:26 PM) *
i still no point in sinking all that money into a 7A


Im very open to opinions! please let me know what you think.

But the reasoning for me putting this much money into a 7a is because instead of going out and spending 5k on a neon srt or something similar, I could have a celica that is just as fast if not faster than a srt. And not to mention the motor and tranny in that car will be rebuilt and will be more reliable than going out and buying another car with quite a bit of miles on it.

Posts in this topic
- rapid36   Building the 7afe to handle boost   Feb 5, 2013 - 1:34 PM
- - mkernz22   Everything you will ever need to know http://www....   Feb 5, 2013 - 2:20 PM
|- - rapid36   QUOTE (mkernz22 @ Feb 5, 2013 - 2:20...   Feb 5, 2013 - 3:21 PM
- - Smaay   actually the 1MZ weighs about the same as a 7A-FE....   Feb 5, 2013 - 3:25 PM
|- - rapid36   QUOTE (Smaay @ Feb 5, 2013 - 3:25 PM...   Feb 5, 2013 - 3:31 PM
- - mkernz22   Click the link to the thread I posted, you might e...   Feb 5, 2013 - 5:34 PM
- - Smaay   the 7A is cast Iron. the MZ is Aluminum. I can eas...   Feb 5, 2013 - 6:37 PM
- - rapid36   oh ok, well i already bought most of the parts tha...   Feb 6, 2013 - 11:16 AM
- - Smaay   tell me more about this transmission you have, wha...   Feb 6, 2013 - 12:09 PM
|- - rapid36   QUOTE (Smaay @ Feb 6, 2013 - 12:09 P...   Feb 6, 2013 - 1:59 PM
- - mkernz22   Just because the clutch can handle up to 400hp doe...   Feb 6, 2013 - 3:06 PM
|- - rapid36   QUOTE (mkernz22 @ Feb 6, 2013 - 3:06...   Feb 6, 2013 - 4:09 PM
- - mkernz22   I didn't know what your power goals were, but ...   Feb 6, 2013 - 4:57 PM
|- - rapid36   QUOTE (mkernz22 @ Feb 6, 2013 - 4:57...   Feb 6, 2013 - 5:50 PM
- - Syaoran   Transmissions don't handle HP, and cars don...   Feb 7, 2013 - 4:11 PM
|- - Smaay   QUOTE (Syaoran @ Feb 7, 2013 - 1:11 ...   Feb 7, 2013 - 4:23 PM
|- - rapid36   QUOTE (Syaoran @ Feb 7, 2013 - 4:11 ...   Feb 7, 2013 - 4:27 PM
- - Syaoran   HP is a measure of torque multiplied by the RPM wh...   Feb 7, 2013 - 5:12 PM
|- - rapid36   QUOTE (Syaoran @ Feb 7, 2013 - 5:12 ...   Feb 7, 2013 - 5:22 PM
|- - Smaay   QUOTE (Syaoran @ Feb 7, 2013 - 2:12 ...   Feb 7, 2013 - 6:16 PM
- - rapid36   So does anyone know if i will need a forged crank ...   Feb 8, 2013 - 11:04 AM
- - Smaay   stock crank is fine. i dont think the 4A pistons a...   Feb 9, 2013 - 4:28 PM
|- - rapid36   QUOTE (Smaay @ Feb 9, 2013 - 4:28 PM...   Feb 11, 2013 - 1:17 PM
- - Smaay   i still no point in sinking all that money into a ...   Feb 11, 2013 - 1:26 PM
|- - rapid36   QUOTE (Smaay @ Feb 11, 2013 - 2:26 P...   Feb 11, 2013 - 5:56 PM
|- - mgnt232   you can buy a 3s clip for like 3-4k and push quite...   Feb 11, 2013 - 6:35 PM
|- - Smaay   QUOTE (rapid36 @ Feb 11, 2013 - 2:56...   Feb 11, 2013 - 9:56 PM
- - celica74   If your looking to get 300hp out of a 7a your look...   Feb 11, 2013 - 9:56 PM
- - rapid36   QUOTE (celica74 @ Feb 11, 2013 - 10...   Feb 12, 2013 - 11:26 AM
- - mgnt232   I think everyone gets it what your going for. And ...   Feb 12, 2013 - 1:19 PM
- - rapid36   QUOTE (mgnt232 @ Feb 12, 2013 - 1:19...   Feb 12, 2013 - 4:53 PM
- - mgnt232   >click here< That link is to pressure2 (a mo...   Feb 12, 2013 - 7:07 PM
- - rapid36   QUOTE (mgnt232 @ Feb 12, 2013 - 8:07...   Feb 13, 2013 - 11:20 AM


Reply to this topicStart new topic
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:

 



Lo-Fi Version Time is now: November 29th, 2024 - 6:31 PM