Onnaj's 1998 Celica ST to 4AGE 20V Blacktop conversion, Next project: C160 LSD 6-speed gearbox :) Options

[onnaj]

Follow my topic cause in the next months i'm going to put a 4AGE 20V Blacktop engine in my 1998 Celica 7AFE. I just love the noise and revs of the Blacktop. I was also doubting about the Beams, but that engine was much more expensive, so the Blacktop wil be the one for me at the moment. Thought also about the 1MZ-FE, but it hasn't been done a lot in Holland and the engines cannot be find over here.

So i've order the blacktop with all the ancillaries, i think at least, and through club4ag.com i've ordered an uncut wiring harness and ECU from a 6 speed m/t. I'm going to use my own C52 gearbox.

So will be continued soon.....

This post has been edited by onnaj: Aug 28, 2013 - 6:28 AM

[onnaj]

I've bought an old 7afe (without airco ) harness to play with before i'm going to cut the one in the car.

Here some photo's:
The complete wiring which has been cut in the engine compartment, a few inches from the firewall hole:


The ECU connectors:


The .... connectors, don't know yet what they are for:


The cut harness with (from what i remember is) the IAT connector:

I'm not sure of i can do a lot with this old harness, but i think it wouldn't harm to have some spare cables and connector by hand.

Now hopefully someone can help me out with finding the wiring diagrams for both the 4AGE 20V blacktop and 7AFE Celica. The engine is going to be picked up tomorrow so more pics to follow!