![]() |
![]() |
![]() |
|
Enthusiast ![]() ![]() Joined Jun 26, '12 From Seattle, WA Currently Offline Reputation: 1 (100%) ![]() |
So here is the situation:
I have about a small cup of standing water in one of my hi beams. It wont go away and iv tried to plug the hole but it keeps getting in. About half of the tabs on all four lights are broken two of the four are being held in by tightening the bolt, that is sopposed to go on the tab, on a cut and bent piece of coat hanger. Ive always wanted projectors, but theyre expensive. So here is my question: Has anybody ever had jsut the High beams as projectors on their own car? how does it look? Also, at this point do you think I should just get all four projectors, or wait and only replace the one that has water in it with a stock one? Will try to get a good pic of the water and the tabs later if anybody is really interesetd hahha |
![]() |
![]() |
|
![]() Moderator ![]() ![]() ![]() ![]() ![]() Joined Jun 29, '08 From Denver Currently Offline Reputation: 59 (100%) ![]() |
Stambo had this setup for a while.
![]() -------------------- "Employ your time in improving yourself by other men's writings, so that you shall gain easily what others labored hard for." -Socrates. Even Socrates told us to use the search button!
![]() 2006 Aston Martin V8 Vantage. 1998 Celica GT- BEAMS Swapped. 2022 4Runner TRD Off Road Prenium. 2021 GMC Sierra AT4. |
![]() ![]() |
Lo-Fi Version | Time is now: February 23rd, 2025 - 3:36 PM |