6G Celicas Forums

Welcome Guest ( Log In | Register )

> Suspension techniques
post May 16, 2013 - 12:03 PM
+Quote Post
mi645

Enthusiast
***
Joined May 23, '12
From northridge,CA
Currently Offline

Reputation: 3 (100%)




Recently bought suspension techniques sway bar set my front set came with poly red bushings and my rear came with black bushings both away bars are graphite grey I installed the front and it rubs on the driver side. Frame rail the beginning of it right where the bushing mounts basically ideas? Could this be the old non revised version?
 
Start new topic
Replies
post May 16, 2013 - 10:23 PM
+Quote Post
Lone_Wolf

Enthusiast
*
Joined Apr 22, '09
From Work
Currently Offline

Reputation: 2 (100%)




Easy fix I used some extra all weather pipe insulation I had in the garage don't remember the exact size but it fit like a glove and no more noise oh I also painted my ST sway bars red with hi temp engine paint looked awesome even 5 years later wished I took some pics sadly sold my celi a while back.

*Example*

*The insulation I used was smaller then the example picture above btw

It was only a small area the front ST sway bar was rubbing against if u jack up the car and look under should be easy to tell where its rubbing against I think it was less then 3inch under the driver side honestly took me less then 30min to fix back in 2004 lol

Also if you plan on painting the bars make sure u sand, prep and primer correctly for better quality and longer life.


--------------------
**If you can read this you are too close**

Posts in this topic


Reply to this topicStart new topic
3 User(s) are reading this topic (3 Guests and 0 Anonymous Users)
0 Members:

 



Lo-Fi Version Time is now: December 2nd, 2024 - 6:49 PM