6G Celicas Forums

Welcome Guest ( Log In | Register )

> 95' Celica AM2 Fuse Problem, AM2 Fuse keeps blowing
post May 5, 2013 - 11:44 PM
+Quote Post
Poonicus



Enthusiast
**
Joined Apr 24, '13
From Tomball, TX
Currently Offline

Reputation: 3 (100%)




I've had this Celica for about 5-6 months and I haven't had a problem with it until last month. I was on my way home and it just shut off on me, had power to everything, but the engine wasn't running and the car wouldn't even try to crank.. So, I towed it back home and after trial and error on it for 5 days or so. I had replaced every relay under the hood and the ignitor and then I replaced the AM2 fuse. It ran fine from about the 6th of April till yesterday when the same problem arose again and I just don't have any idea what it could be other than a bad wire in the wiring harness or something shorting out somewhere causing the AM2 Fuse to keep blowing. I know that the problem is link to that fuse because I can replace the fuse and it will crank but then the fuse blows and I'm back to square one. Any help would be appreciated. I love this car and I would really like to get it running again.


--------------------
"As a professor of science, I assure you we did, in fact, evolve from filthy monkey-men." -Prof. Farnsworth
 
Start new topic
Replies
post Jun 2, 2013 - 5:13 PM
+Quote Post
travisxcore

Enthusiast
***
Joined Mar 24, '11
From 704
Currently Offline

Reputation: 3 (100%)




My aftermarket (from the dealer) alarm is hooked up through the AM2 fuse and used to blow it on a regular basis. This was before I owned the car so idk why I did it but its something to look into. Its only blown once since I had it. I had it towed home just to realize 5mins later that after checking that fuse 10xs its was blown. laugh.gif

Posts in this topic


Reply to this topicStart new topic
7 User(s) are reading this topic (7 Guests and 0 Anonymous Users)
0 Members:

 



Lo-Fi Version Time is now: January 10th, 2025 - 6:16 AM