FS: Four 20mm Spacers |
FS: Four 20mm Spacers |
Jun 5, 2013 - 12:20 AM |
|
Enthusiast Joined May 10, '10 From MA Currently Offline Reputation: 37 (100%) |
Selling the Four 20mm bolt on spacers.
When I say bolt on, I mean that they bolt onto the hub and the wheel goes on over them. This way you don't need extended studs on your car. I only had them on for a couple months and I'm selling them because I don't need them and need the money for a new lens for my camera! Looking for $100 shipped within the USA. I'll get pictures up tomorrow. |
Jun 5, 2013 - 6:23 AM |
|
Enthusiast Joined Dec 22, '06 From Columbia, MD Currently Offline Reputation: 13 (100%) |
list a brand with them.
Just a heads up the minimum size for a bolt on spacer(for the front, i am unsure of the rear) should be 25mm, because that is the minimum size for the spacer to completely clear the original studs and if you have wheels that dont have pockets for those original studs that are sticking out, you will have a problem -------------------- 1995 GT::::Diffusing the Situation エキサイティングカーレーシングチーム! march 2010 COTM : 6GC feature 2014 : january 2015-2016-2018 COTM |
Jun 5, 2013 - 9:26 AM |
|
Enthusiast Joined Jun 26, '12 From Seattle, WA Currently Offline Reputation: 1 (100%) |
list a brand with them. Just a heads up the minimum size for a bolt on spacer(for the front, i am unsure of the rear) should be 25mm, because that is the minimum size for the spacer to completely clear the original studs and if you have wheels that dont have pockets for those original studs that are sticking out, you will have a problem Confused a tad about what you said here, but are you saying that if I were to put on these spacers that I would only have 5 milimeters of thread to attach my wheels with? |
Jun 5, 2013 - 12:43 PM |
|
Enthusiast Joined Jan 4, '12 From US Currently Offline Reputation: 6 (100%) |
list a brand with them. Just a heads up the minimum size for a bolt on spacer(for the front, i am unsure of the rear) should be 25mm, because that is the minimum size for the spacer to completely clear the original studs and if you have wheels that dont have pockets for those original studs that are sticking out, you will have a problem Confused a tad about what you said here, but are you saying that if I were to put on these spacers that I would only have 5 milimeters of thread to attach my wheels with? He means that unless your wheels have holes in the back designed for clearing studs, these won't fit. Most universal lug (10-lug) wheels don't have these holes. Most OEM wheels and single lug pattern (5x100 only in our case) aftermarket wheels do have them. -------------------- 1993 Celica GT Coupe - sold
1994 Celica GT Liftback |
Lo-Fi Version | Time is now: December 1st, 2024 - 7:19 PM |