95' Celica AM2 Fuse Problem, AM2 Fuse keeps blowing |
95' Celica AM2 Fuse Problem, AM2 Fuse keeps blowing |
May 5, 2013 - 11:44 PM |
|
Enthusiast Joined Apr 24, '13 From Tomball, TX Currently Offline Reputation: 3 (100%) |
I've had this Celica for about 5-6 months and I haven't had a problem with it until last month. I was on my way home and it just shut off on me, had power to everything, but the engine wasn't running and the car wouldn't even try to crank.. So, I towed it back home and after trial and error on it for 5 days or so. I had replaced every relay under the hood and the ignitor and then I replaced the AM2 fuse. It ran fine from about the 6th of April till yesterday when the same problem arose again and I just don't have any idea what it could be other than a bad wire in the wiring harness or something shorting out somewhere causing the AM2 Fuse to keep blowing. I know that the problem is link to that fuse because I can replace the fuse and it will crank but then the fuse blows and I'm back to square one. Any help would be appreciated. I love this car and I would really like to get it running again.
-------------------- "As a professor of science, I assure you we did, in fact, evolve from filthy monkey-men." -Prof. Farnsworth
|
Jun 7, 2013 - 6:04 PM |
|
Enthusiast Joined Aug 20, '08 From san jose ca Currently Offline Reputation: 0 (0%) |
check the ground going to the igniter wont work unless its attached to the car... and all the other grounds...if it got worse after you changed some parts then maybe putting it back together is your best bet...exactly... good luck
|
Lo-Fi Version | Time is now: January 10th, 2025 - 6:11 AM |