 How to: axle spacer on 3sgte swap, using hybrid axles on e153 tranny |
 May 9, 2013 - 9:50 AM
|
 
|
 Enthusiast  Joined May 4, '09 From coral springs florida US Currently Offline Reputation: 21 (100%)  |
I realized that there is no much info about this spacer and I thought this might be helpfull for some people using e153 tranny on their swap.
I used lsd mr2 inners and st185 outters If you bolt the mr2 inners to the tranny and st185 to the hub you will have a gap of about 1/2 inches in the middle of the 2 axles.  The spacerr was made out of the mr2 axle. This is the piece you remove from the mr2 axle to make the hybrid one.  You need to cut this section which measures exactly 1/2 inch  Then take the spacer to a machine shop to make the surface flat and flush   Mount it to the st185 axle   And get longer bolts and you are ready to install it  --------------------  |
 |
Replies
|
Jun 23, 2013 - 11:46 AM
|
|
|
Enthusiast Joined Nov 15, '08 From Raleigh NC Currently Offline Reputation: 1 (100%) |
K great thanks....also maybe this is a stupid question but if you need the mr2 inner...how are you cutting it up? I thought I used the left over parts to make it the 1/2 inch spacer
|
Posts in this topic
diegohiga How to: axle spacer on 3sgte swap May 9, 2013 - 9:50 AM
Smaay excellent write up.
I find it really interesting ... May 9, 2013 - 11:37 AM
diegohiga QUOTE (Smaay @ May 9, 2013 - 12:37 P... May 9, 2013 - 12:31 PM TwistedCeli94 What did you use to cut the hard steel? I took the... Jun 22, 2013 - 2:41 PM diegohiga QUOTE (TwistedCeli94 @ Jun 22, 2013 - 3... Jun 22, 2013 - 4:48 PM BonzaiCelica this isn't stickied?? the other 13 page sticki... Sep 11, 2013 - 10:44 PM jeffrosie Whats the new bolt size? Sep 13, 2013 - 2:07 PM |
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
| Lo-Fi Version | Time is now: November 28th, 2024 - 4:55 PM |