3sge, Axels Options

[Benny]

What all axels will fit a 3sge tranny with LSD

[Rusty]

for the clutch setup:
You can use the same clutch cover as you would with a beams/5S-FE swap
You need a specific clutch disc: 31250-32110 or you possibly might be able to use the same disc when the 3S-GTE swappers use the E153

The axles on the SS-II SS E56 are model specific as its using a E series gearbox and superstrut. I cant remember off the top of my head when others have done a beams swap with the S54-06D if they've used their factory axles or the new axles with non-superstrut setup. If they used the new ones you should be using your (if you got them) E series axles, but you cannot use the S series axles.


Bonzai, try reading my above post first.

[Benny]

for the clutch setup:
You can use the same clutch cover as you would with a beams/5S-FE swap
You need a specific clutch disc: 31250-32110 or you possibly might be able to use the same disc when the 3S-GTE swappers use the E153

The axles on the SS-II SS E56 are model specific as its using a E series gearbox and superstrut. I cant remember off the top of my head when others have done a beams swap with the S54-06D if they've used their factory axles or the new axles with non-superstrut setup. If they used the new ones you should be using your (if you got them) E series axles, but you cannot use the S series axles.


Bonzai, try reading my above post first.

Well I didn't get the e series axels so ill have to get those but then what outlets woul be best for the least amount of work, meaning switching hubs ect...